91.040.01 建筑物综合 标准查询与下载

GSO ISO 16745-1:2021 建筑物和土木工程的可持续性 现有建筑物在使用阶段的碳度量 第1部分：计算、报告和沟通

ISO 16745-1:2017 provides requirements for determining and reporting a carbon metric of an existing building, associated with the operation of the building. It sets out methods for the calculation, reporting and communication of a set of carbon metrics for GHG emissions arising from the measured energy use during the operation of an existing building, the measured user-related energy use, and other relevant GHG emissions and removals. These carbon metrics are separated into three measures designated CM1, CM2, and CM3 (see 5.1.1). ISO 16745-1:2017 follows the principles set out in ISO 15392 and those described in Clause 4. Where deviations from the principles in ISO 15392 occur, or where more specific principles are stated, this document takes precedence. The carbon metrics CM1 and CM2 are not quantified based on life cycle assessment (LCA) methodology. Carbon metric CM3 may include partial quantification based on the results of LCA. ISO 16745-1:2017 does not include any method of modelling of the operational energy use of the building but follows the conventions provided by other International Standards, as given in relevant clauses. ISO 16745-1:2017 is not an assessment method for evaluating the overall environmental performance of a building or a building-rating tool and does not include value-based interpretation of the carbon metric(s) through weightings or benchmarking. ISO 16745-1:2017 deals with the application of the carbon metric(s) for an existing building, either residential or commercial, or a building complex. It does not include provisions for regional and/or national building stock.

Sustainability in buildings and civil engineering works — Carbon metric of an existing building during use stage — Part 1: Calculation, reporting and communication

GSO ISO 21930:2021 建筑和土木工程的可持续性 建筑产品和服务环境产品声明的核心规则

ISO 21930:2017 provides the principles, specifications and requirements to develop an environmental product declaration (EPD) for construction products and services, construction elements and integrated technical systems used in any type of construction works. ISO 21930:2017 complements ISO 14025 by providing specific requirements for the EPD of construction products and services. ISO 21930:2017 establishes a core set of requirements to be considered as core product category rules (PCR) to develop an EPD for any construction product or service. In addition, this document, as the core PCR document for construction products, construction elements and integrated technical systems: a) includes the rules for calculating the life cycle inventory analysis (LCI), the predetermined environmental indicators and the life cycle impact assessment (LCIA) results that are reported in the EPD; b) describes which life cycle stages are considered in a particular type of EPD, which processes are to be included in the life cycle stages and how the stages are subdivided into information modules; c) defines rules for the development of scenarios; d) includes the rules for reporting relevant environmental and technical information that are not covered by LCA; e) defines the core elements to be included in an EPD; f) establishes the structure of a project report; g) defines the conditions under which construction products can be compared, based on the information provided by an EPD; h) provides requirements and guidelines on PCR for sub-categories of construction products; i) includes mandatory and unalterable requirements for any PCR based on this document. EPDs for construction products, as described in this document, are primarily intended for use in B2B communication, but their use in B2C communication under certain conditions is not precluded. For EPDs intended for B2C communication, refer to ISO 14025 (see 5.4). The assessment of social and economic impacts at the product level is not covered by this document. NOTE 1 In this document, unless otherwise designated, the term construction product is used for any good(s) or service(s) related to construction works. NOTE 2 Construction assemblies, construction elements and integrated technical systems, incorporated within construction works, can be considered construction products.

Sustainability in buildings and civil engineering works — Core rules for environmental product declarations of construction products and services

GSO ASTM E2432:2021 与建筑物相关的可持续性一般原则标准指南

1.1 Sustainabilty has three types of general principles: environmental, economic, and social. This guide covers the fundamental concepts and associated building characteristics for each of the general principles of sustainability. 1.2 This guide distinguishes between ideal sustainability and applied sustainability. Ideally, human activities would not require making trade-offs among environmental, economic, and social goals. However, this guide recognizes that, in applying sustainability principles to buildings, decision makers must often balance opportunities and challenges associated with each of the general principles. 1.3 This guide identifies general methodologies associated with the decision-making process used in pursuing sustainability

Standard Guide for General Principles of Sustainability Relative to Buildings

GSO ISO 18566-3:2021 建筑环境设计 循环辐射加热和冷却板系统的设计、测试方法和控制 第3部分：天花板安装辐射板的设计

ISO 18566-3:2017 specifies the design of ceiling mounted radiant panels. ISO 18566-3:2017 is applicable to water-based heating and cooling panel systems (free hanging) in residential, commercial and industrial buildings. The methods apply to systems mounted to the ceiling construction with an open air gap. ISO 18566-3:2017 applies to all types of prefabricated radiant panels that are part of the room periphery. ISO 18566-3:2017 does not cover panels embedded into ceiling, wall or floor structures without open air gap and hybrid (combined thermal radiation and forced-convection) ceiling panels.

Building environment design — Design, test methods and control of hydronic radiant heating and cooling panel systems — Part 3: Design of ceiling mounted radiant panels

GSO ISO 15928-2:2021 房屋 性能描述 第2部分：结构适用性

ISO 15928-2:2015 sets out a method for describing the structural serviceability performance of houses. It covers objectives, provides performance descriptions, establishes parameter descriptions and outlines evaluation processes. ISO 15928-2:2015 is intended for use in the evaluation of the design and construction of houses, in the international trading of houses or their sub-systems, and in developing risk-management tools for the protection of houses. The ISO 15928‑ series does not specify a level of performance and it is not intended to provide a design method and/or criteria. NOTE 1 Annex A includes background information on this part of ISO 15928, guidance on its use, and suggestions on good practice. NOTE 2 Details on references referred to in Notes are provided in a Bibliography. NOTE 3 Structural safety, durability and other attributes are covered in other parts of ISO 15928.

Houses — Description of performance — Part 2: Structural serviceability

GSO ISO 11855-7:2021 建筑环境设计 嵌入式辐射供暖和制冷系统的设计、尺寸确定、安装和控制 第7部分：能量计算的输入参数

This document specifies procedures and conditions to enable the heat flow in water-based and electrical surface heating and cooling systems to be determined relative to the medium differential temperature for systems. The determination of thermal performance of water-based surface heating and cooling systems and their conformity to this document is carried out by calculation in accordance with design documents and a model. This enables a uniform assessment and calculation of water-based surface heating and cooling systems. The surface temperature and the temperature uniformity of the heated/cooled surface, nominal heat flow density between water or electrical heated layer and space, the associated nominal medium differential temperature, and the field of characteristic curves for the relationship between heat flow density and the determining variables are given as the result. This document is applicable to water-based embedded surface heating and cooling systems in residential, commercial and industrial buildings. This document is also applicable for electrical heated embedded systems. The methods apply to systems integrated into the wall, floor or ceiling construction without any open air gaps. It does not apply to ceiling mounted panel systems with open air gaps which are not integrated into the building structure.

Building environment design — Design, dimensioning, installation and control of embedded radiant heating and cooling systems — Part 7: Input parameters for the energy calculation

GSO ISO 18566-4:2021 建筑环境设计 循环辐射加热和冷却面板系统的设计、测试方法和控制 第4部分：天花板安装辐射加热和冷却面板的控制

ISO 18566-4:2017 specifies the control of ceiling mounted radiant heating and cooling panels. The requirements in this document are applicable only to the components of the heating/cooling systems and the elements which are part of the heating/cooling panels and which are installed to provide heating and/or cooling. ISO 18566-4:2017 is applicable to water-based ceiling mounted radiant heating and cooling panels in residential, commercial and industrial buildings. The methods apply to systems mounted under the ceiling with or without open air gaps between the panels and the ceiling.

Building environment design — Design, test methods and control of hydronic radiant heating and cooling panel systems — Part 4: Control of ceiling mounted radiant heating and cooling panels

GSO ISO 15928-4:2021 房屋 性能描述 第4部分：消防安全

ISO 15928-4:2017 sets out a method for describing the fire safety performance of houses. It covers user needs, provides performance descriptions, and outlines evaluation processes. It includes the description of relevant parameters for early warning, fire suppression, fire containment, means of escape, control of structural behaviour, and emission and spread of fire effluent. ISO 15928-4:2017 is intended for use in the evaluation of the design and construction of houses, in the international trading of houses or their sub-systems, and in developing risk-management tools for the protection of houses. It does not specify a level of performance and it is not intended to provide a design method and/or criteria. ISO 15928-4:2017 does not cover the performance of houses exposed to wild fire. NOTE 1 Structural safety and other performance attributes of a house are covered in other parts of the ISO 15928 series. NOTE 2 The emission of smoke and hot gases from contents in the house when ignited can impact the fire safety performance of a house, but the type or nature of such contents brought into the house is not the subject of the evaluation process. NOTE 3 The term "wild fire" is used to mean the concept of wild land fire, bush fire and unplanned burning in vegetative fuels, etc.

Houses — Description of performance — Part 4: Fire safety

GSO ISO 15928-1:2021 房屋 性能描述 第1部分：结构安全

ISO 15928-1:2015 sets out a method for describing the structural safety performance of houses. It covers objectives, provides performance descriptions, establishes parameter descriptions, and outlines evaluation processes. It includes a description of permanent, imposed, wind, seismic, snow and other actions as well as structural resistance. ISO 15928-1:2015 is intended for use in the evaluation of the design and construction of houses, in the international trading of houses or their sub-systems, and in developing risk-management tools for the protection of houses. The ISO 15928‑ series does not specify a level of performance and it is not intended to provide a design method and/or criteria. It describes the structural safety of a house as a whole. NOTE 1 Annex A includes background information on this part of ISO 15928, guidance on its use, and suggestions on good practice. NOTE 2 Details on references referred to in Notes are provided in a Bibliography. NOTE 3 Structural serviceability, durability and other attributes are covered in other parts of ISO 15928.

Houses — Description of performance — Part 1: Structural safety

GSO ISO 19454:2021 建筑环境设计 室内环境 视觉环境可持续原则的采光设计

This document provides a design process for daylight openings in order to ensure the principle of sustainability in the indoor visual environment. The design process for daylight openings includes the consideration of: — sunshine duration in the building interiors; — daylight opening ratio to the wall area of a habitable room; — daylight opening ratio to the floor area of a habitable room; — appropriate levels of indoor daylight based on human visual needs and the extent of sunlight; — daylight control systems in the building; — thermal comfort, thermal gains and energy efficiency. This document is applicable to building environment design for new buildings and the retrofit of existing buildings.

Building environment design — Indoor environment — Daylight opening design for sustainability principles in visual environment

GSO ASTM E2844:2021 证明建筑物位置可提供公共交通的标准规范

This specification prescribes requirements for demonstrating that a building's location provides a minimal level of access to public transit that allows occupants to travel to places of employment and to run typical errands. It is intended to facilitate the decision-making process for selection of a building site that provides opportunities for occupants to use public transit. It specifies a single indicator regarding the environmental performance related to a building's location, and for evaluating whether a building is located in such a way as to minimize the impacts associated with occupants' travel.Included in this specification are requirements for public transit identification and categorization, public transit access and public access location proximity, and documentation substantiating compliance with the requirements and criteria.

Standard Specification for Demonstrating That a Building’s Location Provides Access to Public Transit

GSO ISO 19208:2021 指定建筑物性能的框架

ISO 19208:2016 provides the framework for specifying the performance of a building as a whole or a part thereof in order to satisfy specified user requirements and societal expectations. ISO 19208:2016 covers buildings as constructed and inbuilt fixed components. It does not cover a) the use of the land for buildings, b) the design and operation of the environment within which buildings are located, and c) moveable contents within buildings. NOTE 1 Guidance on the application of certain clauses is provided in Annex A. NOTE 2 A part of a building includes subsystems, spaces, elements, assemblies, components, products and materials.

Framework for specifying performance in buildings

GSO ISO/TR 16822:2021 建筑环境设计采暖、通风、空调和生活热水设备能效相关试验程序清单

ISO/TR 16822:2016 lists testing and rating procedures for determining energy efficiency of heating, ventilating, and air conditioning equipment. It is applicable to space conditioning and water heating equipment. Testing and rating procedures are listed in two ways.

Building environment design — List of test procedures for heating, ventilating, air-conditioning and domestic hot water equipment related to energy efficiency

T/CECS 878-2021 装配式保温装饰一体化混凝土外墙应用技术规程

主要技术内容包括：总则、术语和符号、基本规定、材料、建筑设计、结构设计、制作与运输、安装施工、验收等。

Technical specification for the application of prefabricated thermal insulation and decoration integrated concrete exterior walls

PN-EN 17210-2021-06 E 建成环境的可达性和可用性 功能需求

Accessibility and usability of the built environment -- Functional requirements

WW/T 0110-2020 长城维修工程施工规程

Great Wall Maintenance Engineering Construction Regulations

T/ZBTA 07-2021 中国建设工程鲁班奖（国家优质工程）创建

编制过程中，编制组认真总结了近年来的评奖经验，参考相关标准、规范的内容，邀请专家开展多次专题研究，反复讨论、修改，最后经审查定稿。

The Creation and Implementation Guide of China Construction Engineering Luban Prize（National Prime-quality Project）

EN 15643:2021 建筑工程的可持续性 建筑和土木工程评估框架

Sustainability of construction works - Framework for assessment of buildings and civil engineering works

ISO 15928-7:2021 房屋.性能描述.第7部分：可达性和可用性

This document sets out a method for describing the performance of houses. It covers user needs, provides performance descriptions, and outlines evaluation processes. It includes the description of relevant parameters necessary to ensure accessibility and usability in houses. It also includes features to ensure safety during daily use, i.e., reasonable consideration to prevent accident like tripping, falls, or collision. This document is intended for use in the evaluation of the design and construction of houses, in the international trading of houses or their sub-systems, and in developing risk-management tools for the protection of houses. It does not specify a level of performance and it is not intended to provide design method and/or criteria. NOTE 1 Structural safety, fire safety, and other performance attributes of a house are covered in other parts of the ISO 15928 series. NOTE 2 Exporting a house (as a complete set, “kit house” for example) does mean that the site is not necessarily predetermined. Therefore, surrounding conditions cannot be known in advance. Even the interface between the entrance door and the ground cannot be predetermined (including how flat entry can be achieved). It is up to the builder and the client to decide how to design the interface. However, design examples for accessibility can be given. NOTE 3 The way to describe performance of buildings is given in ISO 19208.

Houses - Description of performance - Part 7: Accessibility and usability

T/CSUS 15-2021 超低能耗建筑评价标准

本标准共分6章，主要技术内容是总则、术语、基本规定、建筑性能、施工质量、运营质量。

Ultra-low energy consumption building evaluation standard