91.040.01 建筑物综合 标准查询与下载

BS ISO 21678:2020 建筑和土木工程的可持续性 指标和基准 原则、要求和指南

What is ISO 21678 about?    ISO 21678 discusses principles, requirements and guidelines for the development and use of benchmarks when assessing the economic, social and environmental performance of buildings and civil engineering works by using sustainability indicators.   ISO 21678 specifies three types of values for benchmarks i.e. limit values, reference values and target values which are used for comparison purposes.   ISO 21678 complements and supports ISO 219291 and ISO/TS 219292 by crea...

Sustainability in buildings and civil engineering works. Indicators and benchmarks. Principles, requirements and guidelines

ISO 21678:2020 建筑物和土木工程的可持续性.指标和基准.原则 要求和指南

This document defines principles, requirements and guidelines for the development and use of benchmarks when assessing the economic, social and/or environmental performance of buildings and civil engineering works by using sustainability indicators. It complements and supports the application of ISO 21929-1 and ISO/TS 21929-2 by creating principles and requirements for the establishment of benchmarks that support target setting, decision making and communication to third parties. This document is also related to ISO 21931-1 and ISO 21931-2 by creating principles, requirements and guidelines for the establishment and use of benchmarks related to environmental performance and other aspects of sustainability. This document describes three types of values for benchmarks (performance levels for comparison purposes): — limit values; — reference values; — target values. This document does not set benchmarks.

Sustainability in buildings and civil engineering works — Indicators and benchmarks — Principles, requirements and guidelines

T/JJN 001-2020 免拆模板外保温系统应用技术标准

免拆模板外保温系统的设计、施工和验收

Technical standard for application of external insulation system of formworks without dismantling

DB44/T 2228-2020 智慧园区设计、建设与验收技术规范

Technical specifications for design, construction and acceptance of smart parks

ISO 52031:2020 建筑物的能量性能.系统能量要求和系统效率的计算方法.空间排放系统（加热和冷却）

This document establishes the required inputs, outputs and links (structure) of the calculation method for heating and cooling space emission systems. This document is applicable to the energy performance calculation of heating systems and water-based cooling space emission sub-systems.

Energy performance of buildings — Method for calculation of system energy requirements and system efficiencies — Space emission systems (heating and cooling)

BS ISO 20887:2020 建筑和土木工程的可持续性 可拆卸和适应性设计 原则、要求和指导

What is ISO 20887 about?    ISO 20887 is an international standard on sustainability which explains the d esign for disassembly and adaptability of buildings and civil engineering works.   ISO 20887 provides an overview of design for disassembly and adaptability (DfD/A) principles and potential strategies for integrating these principles into the design process.   ISO 20887 provides information for owners, architects, engineers, and product designers and manufacturers to assist in their understanding of potential DfD/A options and considerations, and for other parties who are responsible for financing, regulating, constructing, transforming, deconstructing, or demolishing construction works.   Who is ISO 20887 for?   ISO 20887 on design for disassembly and adaptability in buildings is relevant to :

Sustainability in buildings and civil engineering works. Design for disassembly and adaptability. Principles, requirements and guidance

ISO 20887:2020 建筑物和土木工程的可持续性.拆卸和适应性设计.原则 要求和指南

This document provides an overview of design for disassembly and adaptability (DfD/A) principles and potential strategies for integrating these principles into the design process. This document provides information for owners, architects, engineers, and product designers and manufacturers to assist in their understanding of potential DfD/A options and considerations, and for other parties who are responsible for financing, regulating, constructing, transforming, deconstructing, or demolishing construction works. This document is applicable to all types of buildings (e.g. commercial, industrial, institutional, and residential), civil engineering works (e.g., dams, bridges, roads, railways, runways, utilities, pipelines) and their constituent parts. It can be used for new construction, refurbishment and renovation, and in the design of incremental improvements in, or complete redesign of, buildings, building systems, civil engineering works, and their constituent parts. This document also provides guidance on measuring performance regarding each DfD/A principle and related objectives. This document is intended to be used in conjunction with and following the principles set out in This document does not set specific levels of performance for the disassembly or adaptability of constructed works, however, it does include requirements that are mandatory for the implementation of specific DfD/A principles that are applicable when these principles are adopted.

Sustainability in buildings and civil engineering works — Design for disassembly and adaptability — Principles, requirements and guidance

DB1506/T 13-2020 热力站建设技术标准

本标准适用于以热水为供热介质的热力 站系统，包括热力站入口（以热力站进站前2 m管道为界）至出口（以热力站出站2 m管道为界）所有设备、管道的建设。

Thermal station construction technical standards

BS ISO 15392:2019 建筑和土木工程的可持续性 一般原则

What is ISO 15392 - Sustainability in buildings and civil engineering works about?    This international standard discusses construction technology and aims to assist its users in constructing eco-friendly and better-quality building structures.    ISO 15392 identifies and establishes general principles for the contribution of buildings, civil engineering works and other types of construction works (hereinafter referred to collectively as   construction works) to sustainable development.    ISO 15392 is based on the concept of sustainable development as it applies to the life cycle of construction works, from inception to the end of life.

Sustainability in buildings and civil engineering works. General principles

T/CABEE 003-2019 近零能耗建筑测评标准

《标准》紧密结合我国气候特点、建筑类型、用能特性和发展趋势，广泛借鉴和吸收了发达国家先进经验，对我国已经完成的近零能耗建筑示范项目进行了深入研究，首次建立设计评价、施工评价及运行评估阶段的近零能耗建筑全过程评价体系，提出近零能耗建筑设计、施工、运行阶段的评价方法和技术要求。

Evaluation standard for nearly zero energy buildings

T/HQPA 5-2019 防倾覆弹性滑板支座

本标准技术内容规定了原材料质量要求，产品的性能指标，试验方法及检验规则。

Anti-overturning rubber base for building

ISO 15392:2019 建筑可持续发展 - 一般原则

This document identifies and establishes general principles for the contribution of buildings, civil engineering works and other types of construction works (hereinafter referred to collectively as construction works) to sustainable development. It is based on the concept of sustainable development as it applies to the life cycle of construction works, from inception to the end-of-life. This document is applicable to new and existing construction works, individually and collectively, as well as to the materials, products, services and processes related to their life cycle. This document does not provide performance levels (benchmarks) that can serve as the basis for sustainability claims. NOTE 1 The principles established in this document are intended to be applied broadly in the context of construction works. Specific applications are the subject of other related documents. NOTE 2 Construction works are designed to meet numerous requirements, such as those expressed and established by authorities having jurisdiction. In some circumstances, it can be necessary to go beyond established requirements to contribute further to sustainable development. NOTE 3 In this document, unless explicitly stated, the term ‘product(s)’ implies construction product (3.7) and the term ‘service(s)’ implies construction service (3.8). This document is not intended to provide the basis for assessment of organizations or other stakeholders, but does acknowledge the importance of their role in the context of contributions to sustainable development by buildings, civil engineering works and other construction works. NOTE 4 More detailed discussions on social responsibility aspects, relative to organizations, can be found in

Sustainability in buildings and civil engineering works — General principles

BS ISO 19455-1:2019 规划建筑调试的功能性能测试 二次液体循环泵、系统和相关控制装置

What is ISO 19455 ‑ 1 – Planning for FPT for building commissioning about?    ISO 19455 ‑ 1 is the first part of the ISO 19455 multi-series . This international standard helps its users to verify the performances of energy-efficient technologies installed in their building projects.   ISO 19455 ‑

Planning for functional performance testing for building commissioning - Secondary hydronic pump, system and associated controls

BS 8895-3:2019 建筑项目材料效率设计 技术设计实践规范

1   Scope This part of BS 8895 gives recommendations for the implementation of actions and outcomes from the developed design investigations in BS 8895‑2, on optimizing material efficiency in production information , such as information models, detailed drawings and material specification and coordination of technical design work undertaken by architects; structural and building services engineers; consultants; and specialist sub-contractors and/or suppliers, as appropriate. This part of BS 8895 also gives recommendations for the integration of designing for material efficiency into RIBA Plan of Work 2013, Stage 4 ( Technical Design ) [N1]. It provides guidance and case studies on how to implement material efficiency after the completion of the RIBA Plan of Work 2013, Stage 3 (Developed Design) [N1]. This part of BS 8895 is intended to be used by the design team when preparing technical design information that includes proposals for material efficiency .

Designing for material efficiency in building projects - Code of practice for technical design

T/CECS 641-2019 箱式钢结构集成模块建筑技术规程

本规程共分9章和10个附录，主要内容包括：总则、术语和符号、基本规定、建筑设计、结构设计、箱式模块制作与运输、现场安装、质量验收、建筑维护与管理等。

Technical Specification for Containerized Steel Modular Buildings

ISO 19455-1:2019 建筑物调试用功能性能试验的计划.第1部分:二次循环泵、系统和相关控制

This document specifies a planning method for functional performance testing (FPT). This document is applicable to the planning of the FPT during the design phase of new buildings and retrofit projects, which is defined in ISO 16813. This document establishes how to design building environmental systems when the FPT is being carried out. This document defines the following: — what kind of information regarding the system is required (for example, design documents, drawings and product specifications); — what kind of data should be measured (though concrete measurement techniques are not specified in this document); — how the measured data is analysed. Such clear definition of the FPT makes it possible for building designers to prepare and plan for FPT throughout the design process. This document specifies an FPT method for secondary hydronic pump, system and associated controls in heating, ventilation and air conditioning (HVAC) systems.

Planning for functional performance testing for building commissioning — Part 1: Secondary hydronic pump, system and associated controls

T/ZZB 1306-2019 百叶式遮阳篷

本标准规定了百叶式遮阳篷的术语和定义、基本参数与分类、基本要求、技术要求、试验方法、检验规则、标志、包装、运输、贮存、安装和质量承诺。 本标准适用于固定的百叶式遮阳篷（以下简称百叶篷）。

Louvered awning

T/SXCAS 003-2019 企业投资建设项目评估标准

1. 为规范企业投资建设项目评估工作，提高评估质量和效率，根据国家有关法律、法规和政策规定，制定本标准。 2. 本标准适用于山西省行政区域内企业投资应核准的项目及核准机关委托评估机构对实行核准制的企业投资建设项目的评估。

Evaluation Standards for Enterprise Investment and Construction Projects

ISO 11855-7:2019 建筑环境设计嵌入式辐射供暖和制冷系统的设计、尺寸确定、安装和控制第7部分:能量计算的输入参数

This document specifies procedures and conditions to enable the heat flow in water-based and electrical surface heating and cooling systems to be determined relative to the medium differential temperature for systems. The determination of thermal performance of water-based surface heating and cooling systems and their conformity to this document is carried out by calculation in accordance with design documents and a model. This enables a uniform assessment and calculation of water-based surface heating and cooling systems. The surface temperature and the temperature uniformity of the heated/cooled surface, nominal heat flow density between water or electrical heated layer and space, the associated nominal medium differential temperature, and the field of characteristic curves for the relationship between heat flow density and the determining variables are given as the result. This document is applicable to water-based embedded surface heating and cooling systems in residential, commercial and industrial buildings. This document is also applicable for electrical heated embedded systems. The methods apply to systems integrated into the wall, floor or ceiling construction without any open air gaps. It does not apply to ceiling mounted panel systems with open air gaps which are not integrated into the building structure.

Building environment design — Design, dimensioning, installation and control of embedded radiant heating and cooling systems — Part 7: Input parameters for the energy calculation

DB11/T 1665-2019 超低能耗居住建筑设计标准

Design standards for ultra-low energy residential buildings