91.040.01 建筑物综合 标准查询与下载

T/CECS 532-2018 城市地下综合管廊管线工程技术规程

本规程共分为9章，主要内容包括：1 总则；2 术语；3 基本规定；4 给水、再生水管道；5 排水管（渠）；6 天然气管道；7 热力管道；8 电力电缆；9 通信线缆。

Technical regulations for pipeline engineering of urban underground comprehensive utility gallery

DB11/T 1553-2018 居住建筑室内装配式装修工程技术规程

Technical specification for interior assembly decoration engineering of residential buildings

DB11/T 1516-2018 古建筑类博物馆合理用能指南

Guidelines for Rational Energy Use of Ancient Architecture Museums

CAN/CSA Z5000-18:2018 能源使用系统的建筑调试

1.1 General 1.1.1 This Standard provides guidelines for the commissioning of buildings and all energy and domestic water related building systems. It applies to new construction only for Part 3 buildings, as specified in the National Building Code of Canada (NBC). It does not apply to equipment and systems installed by the owner or others after building completion. 1.1.2 This Standard is intended to assist the commissioning team in the preparation and implementation of a commissioning plan. This plan specifies commissioning requirements for building systems that affect energy and domestic water usage, and includes, but is not limited to, descriptions of the following: a) the commissioning process; b) the resources required to complete commissioning; c) the responsibilities of the commissioning team; d) the sequence and integration of commissioning activities; e) the functional testing of energy-related building systems; f) monitoring-based commissioning; and g) analyzing and providing data to assist in determining compliance with local energy efficiency regulations. 1.1.3 This Standard is intended to be complementary to CSA Z320, with additions as appropriate to address the special requirements for verifying energy performance during the commissioning of buildings. 1.2 Specific systems 1.2.1 The systems covered in this Standard are classified as a) architectural and building enclosures; b) vertical and horizontal transportation; c) electrical and lighting; d) mechanical; e) controls and building automation; f) energy monitoring-metering; and g) water using systems. 1.2.2 This Standard does not apply to a) fire pumps; b) smoke pressurization fans; c) fire alarm and detection systems; d) other life safety systems that operate only during testing or emergencies; and e) equipment or systems exempt from the National Energy Code of Canada for Buildings (NECB). 1.3 Terminology In this Standard, “shall” is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; “should” is used to express a recommendation or that which is advised but not required; and “may” is used to express an option or that which is permissible within the limits of the Standard. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.

Building commissioning for energy using systems

BS ISO 17800:2017 设施智能电网信息模型

2.   Scope This model provides the basis for common information exchange between control systems and end use devices found in single - and multi-family homes, commercial and institutional buildings, and industrial facilities that is independent of the communication protocol in use. It provides a common basis for electrical energy consumers to describe, manage, and communicate about electrical energy consumption and forecasts. The model defines a comprehensive set of data objects and actions that support a wide range of energy management applications and electrical service provider interactions including: a) on-site generation, b) demand response, c) electrical storage, d) peak demand management, e) forward power usage estimation, f) load shedding capability estimation, g) end load monitoring (sub metering), h) power quality of service monitoring, i) utilization of historical energy consumpt...

Facility smart grid information model

ISO 17800:2017 设施智能电网信息模型

Facility smart grid information model

T/CECS 495-2017 《纤维增强覆面木基结构装配式房屋技术规程》

主要内容包括：总则，术语和符号，材料，建筑设计，结构设计基本规定，楼盖、屋盖构造设计，轻型楼梯构造设计，轻型剪力墙构造设计，轻型桁架构造设计，连接节点设计，地基与基础，施工与质量验收，防护与维修。

Technical specification for wood matrix composites structure based on fiber-enhanced cladding

T/CECS 494-2017 《绿色建筑工程竣工验收标准》

主要内容包括：总则、术语、基本规定、节地与室外环境、节能与能源利用、节水与水资源利用、节材与材料资源利用、室内环境质量。

Standard for completion acceptance of green building construction

BS EN 15643-5:2017 建筑工程的可持续性 建筑和土木工程的可持续性评估 土木工程的具体原则和要求框架

Sustainability of construction works. Sustainability assessment of buildings and civil engineering works. Framework on specific principles and requirement for civil engineering works

BS ISO 16745-1:2017 建筑和土木工程的可持续性 现有建筑在使用阶段的碳计量 计算、报告和沟通

Sustainability in buildings and civil engineering works. Carbon metric of an existing building during use stage. Calculation, reporting and communication

BS ISO 16745-2:2017 建筑和土木工程的可持续性 现有建筑在使用阶段的碳计量 验证

Sustainability in buildings and civil engineering works. Carbon metric of an existing building during use stage. Verification

DB64/T 1510-2017 EPS模块节能建筑应用技术标准

EPS module energy-saving building application technical standards

EN 15643-5:2017 建筑工程的可持续性 建筑物和土木工程的可持续性评估 第5部分：土木工程特定原则和要求的框架

Sustainability of construction works - Sustainability assessment of buildings and civil engineering works - Part 5: Framework on specific principles and requirement for civil engineering works

ASTM C1519-10(2017) 通过实验室加速老化程序评估建筑结构密封胶的耐久性的标准测试方法

Standard Test Method for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures

ISO 9836:2017 建筑物的性能标准.面积和空间指标的定义和计算

This document specifies the definition and calculation of surface area and volume indicators. In defining area measurement, this document uses three measurement concepts: a) the intra-muros and extra-muros concept used in many parts of the world; c) variations on these methods to comply with certain national laws or for particular types of buildings. b) the wall centre method of measurement used in many parts of the world; The surface area and volume indicators defined in this document are intended for practical use, as a basis for measuring various aspects of the performance of buildings or as a planning aid. In other words, they should enable judgement to be made on functional, technical and economic aspects of buildings. This document is intended to be used when establishing — specifications for the geometric performance of a building and its spaces (e.g. in design, purchasing procedures, etc., or in building regulations where appropriate), — technical documentation relating to the performance of whole buildings prepared by designers, contractors and manufacturers, — the amount of floor area that will not be effectively available for the placement of an individual’s workplace, furniture, equipment, or for circulation, and — evaluation, comparison or control of the properties of a building which are connected to its geometric performance. NOTE Although there are a variety of methods of area measurement around the world depending on the country and/or types of buildings, all measuring methods are not necessarily of practical use because of inability to identify real area (e.g. the wall centre method of measurement). Thus, this document specializes in the measurement solely for practical use.

Performance standards in building - Definition and calculation of area and space indicators

BS ISO 18566-2:2017 建筑环境设计 液体循环辐射加热和冷却面板系统的设计、测试方法和控制 天花板安装辐射面板加热和冷却能力的测定

1   Scope This document defines technical specifications and requirements of free hanging (suspended) heating and dry cooling only surfaces with an air gap between construction and the emitter (not embedded) with or without an insulation fed with water at temperatures below 120 °C connected with a centralized heating and/or cooling supply source intended to be installed in buildings. Ceiling mounted radiant panels covered by this document are limited to a width from 0,3 m up to 1,5 m. This document also defines the additional common data that the manufacturer provides to the trade, in order to ensure the correct application of the products.

Building environment design. Design, test methods and control of hydronic radiant heating and cooling panel systems - Determination of heating and cooling capacity of ceiling mounted radiant panels

ISO 21930:2017 建筑和土木工程的可持续性 - 建筑产品和服务的环境产品声明的核心规则

This document provides the principles, specifications and requirements to develop an environmental product declaration (EPD) for construction products and services, construction elements and integrated technical systems used in any type of construction works. This document complements ISO 14025 by providing specific requirements for the EPD of construction products and services. This document establishes a core set of requirements to be considered as core product category rules (PCR) to develop an EPD for any construction product or service. In addition, this document, as the core PCR document for construction products, construction elements and integrated technical systems: a) includes the rules for calculating the life cycle inventory analysis (LCI), the predetermined environmental indicators and the life cycle impact assessment (LCIA) results that are reported in the EPD; b) describes which life cycle stages are considered in a particular type of EPD, which processes are to be included in the life cycle stages and how the stages are subdivided into information modules; c) defines rules for the development of scenarios; d) includes the rules for reporting relevant environmental and technical information that are not covered by LCA; e) defines the core elements to be included in an EPD; f) establishes the structure of a project report; g) defines the conditions under which construction products can be compared, based on the information provided by an EPD; h) provides requirements and guidelines on PCR for sub-categories of construction products; i) includes mandatory and unalterable requirements for any PCR based on this document. EPDs for construction products, as described in this document, are primarily intended for use in B2B communication, but their use in B2C communication under certain conditions is not precluded. For EPDs intended for B2C communication, refer to ISO 14025 (see 5.4). The assessment of social and economic impacts at the product level is not covered by this document. NOTE 1 In this document, unless otherwise designated, the term construction product is used for any good(s) or service(s) related to construction works. NOTE 2 Construction assemblies, construction elements and integrated technical systems, incorporated within construction works, can be considered construction products. 

Sustainability in buildings and civil engineering works — Core rules for environmental product declarations of construction products and services

BS ISO 18566-3:2017 建筑环境设计 循环辐射加热和冷却面板系统的设计、测试方法和控制 天花板安装辐射板的设计

Building environment design. Design, test methods and control of hydronic radiant heating and cooling panel systems. Design of ceiling mounted radiant panels

BS ISO 18566-1:2017 建筑环境设计 循环辐射加热和冷却面板系统的设计、测试方法和控制 词汇、符号、技术规范和要求

Building environment design. Design, test methods and control of hydronic radiant heating and cooling panel systems. Vocabulary, symbols, technical specifications and requirements

BS ISO 18566-4:2017 建筑环境设计 循环辐射加热和冷却面板系统的设计、测试方法和控制 天花板安装的辐射供暖和制冷面板的控制

Building environment design. Design, test methods and control of hydronic radiant heating and cooling panel systems. Control of ceiling mounted radiant heating and cooling panels