91.040.01 建筑物综合 标准查询与下载

ISO 18566-3:2017 建筑环境设计 - 水力辐射加热和冷却面板系统的设计 测试方法和控制 - 第3部分:天花板辐射板设计

This document specifies the design of ceiling mounted radiant panels. This document is applicable to water-based heating and cooling panel systems (free hanging) in residential, commercial and industrial buildings. The methods apply to systems mounted to the ceiling construction with an open air gap. This document applies to all types of prefabricated radiant panels that are part of the room periphery. This document does not cover panels embedded into ceiling, wall or floor structures without open air gap and hybrid (combined thermal radiation and forced-convection) ceiling panels.

Building environment design — Design, test methods and control of hydronic radiant heating and cooling panel systems — Part 3: Design of ceiling mounted radiant panels

ISO 18566-4:2017 建筑环境设计 - 水力辐射加热和冷却面板系统的设计 测试方法和控制 - 第4部分:天花板安装辐射加热和冷却面板的控制

This document specifies the control of ceiling mounted radiant heating and cooling panels. The requirements in this document are applicable only to the components of the heating/cooling systems and the elements which are part of the heating/cooling panels and which are installed to provide heating and/or cooling. This document is applicable to water-based ceiling mounted radiant heating and cooling panels in residential, commercial and industrial buildings. The methods apply to systems mounted under the ceiling with or without open air gaps between the panels and the ceiling.

Building environment design — Design, test methods and control of hydronic radiant heating and cooling panel systems — Part 4: Control of ceiling mounted radiant heating and cooling panels

ISO 18566-2:2017 建筑环境设计 - 水力辐射加热和冷却面板系统的设计 测试方法和控制 - 第2部分:天花板安装辐射板的加热和制冷能力的确定

This document defines technical specifications and requirements of free hanging (suspended) heating and dry cooling only surfaces with an air gap between construction and the emitter (not embedded) with or without an insulation fed with water at temperatures below 120 °C connected with a centralized heating and/or cooling supply source intended to be installed in buildings. Ceiling mounted radiant panels covered by this document are limited to a width from 0,3 m up to 1,5 m. This document also defines the additional common data that the manufacturer provides to the trade, in order to ensure the correct application of the products.

Building environment design — Design, test methods and control of hydronic radiant heating and cooling panel systems — Part 2: Determination of heating and cooling capacity of ceiling mounted radiant

ISO 18566-1:2017 建筑环境设计 - 水力辐射加热和冷却面板系统的设计 测试方法和控制 - 第1部分:词汇 符号 技术规格和要求

This document specifies the design, test conditions and methods for the determination of the cooling and heating capacity and control of radiant heating and cooling panels with an open air gap. This document applies to all types of prefabricated radiant panels that are part of the room periphery such as ceiling, walls and floor. This document is applicable to water-based heating and cooling panel systems (free hanging) in residential, commercial and industrial buildings. The methods apply to systems mounted to the wall, floor or ceiling construction with an open air gap. This document does not cover panels embedded into ceiling, wall or floor structures and hybrid (combined thermal radiation and forced-convection) ceiling panels. This document specifies the definition, symbols, comfort criteria, technical specifications and requirements of ceiling mounted radiant panels.

Building environment design — Design, test methods and control of hydronic radiant heating and cooling panel systems — Part 1: Vocabulary, symbols, technical specifications and requirements

ISO 15686-5:2017 房屋和建筑资产.工作寿命计划.第5部分:寿命周期成本

Buildings and constructed assets - Service life planning - Part 5: Life-cycle costing

T/CDDG 002-2017 沂源县建设工程文件归档管理服务指南

1、总则；2、基本要求；3、建设工程文件归档、接收内容;4、建设工程文件立卷；5、建设工程声像档案制作须知;6、建设工程档案移交与接收。

Yiyuan County Construction Project Document Filing Management Service Guide

BS ISO 16817:2017 建筑环境设计 室内环境 视觉环境设计流程

Building environment design.Indoor environment. Design process for the visual environment

BS ISO 15686-7:2017 建筑物和建筑资产 使用寿命规划 实践中使用寿命数据反馈的性能评估

Buildings and constructed assets. Service life planning. Performance evaluation for feedback of service life data from practice

ASTM E2432-17 建筑物可持续性一般原则的标准指南

1.1 Sustainabilty has three types of general principles: environmental, economic, and social. This guide covers the fundamental concepts and associated building characteristics for each of the general principles of sustainability. 1.2 This guide distinguishes between ideal sustainability and applied sustainability. Ideally, human activities would not require making trade-offs among environmental, economic, and social goals. However, this guide recognizes that, in applying sustainability principles to buildings, decision makers must often balance opportunities and challenges associated with each of the general principles. 1.3 This guide identifies general methodologies associated with the decision-making process used in pursuing sustainability. 1.4 This guide addresses buildings individually and in aggregate (collectively). 1.4.1 The general principles identified in this guide are applicable to all scales of building projects, including: interior spaces, individual buildings and groups of buildings, infrastructure systems, and land use. 1.4.2 The general principles identified in this guide are applicable to all life-cycle stages of a building and its components, including: material extraction, product manufacturing, product transportation, planning, siting, design, specification, construction, operation, maintenance, renovation, retrofit, reuse, deconstruction, and waste disposal of buildings. 1.5 A variety of tools and standards exist that qualify and quantify impacts of buildings, building materials, and building methods in terms of one or more of the general principles of sustainability. It is not within the scope of this standard to recreate or replace these tools. 1.6 This guide does not provide direction as to the specific implementation of the general principles; nor does it provide direction as to the specific weighting of principles necessary for achieving balance. 1.7 Applying the principles in this guide will require professional judgment. Such judgment should be informed by experience with environmental, economic, and social issues as appropriate to the building use, type, scale, and location. 1.8 This guide offers an organized collection of information or a series of options and does not recommend a specific course of action. This document cannot replace education or experience and should be used in conjunction with professional judgment. Not all aspects of this guide may be applicable in all circumstances. This ASTM standard is not intended to represent or replace the standard of care by which the adequacy of a given professional service must be judged, nor should this document be applied without consideration of a project’s many unique aspects. The word “Standard” in the title of this document means only that the document has been approved through the ASTM consensus process. 1.9 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.10 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for General Principles of Sustainability Relative to Buildings

ISO 16745-2:2017 建筑物和土木工程的可持续性. 现有建筑物在使用阶段的碳排放指标. 第2部分: 验证

This document specifies requirements for the verification of a carbon metric calculation for GHG emissions of an existing building during the use stage, where the carbon metric calculation is performed in accordance with ISO 16745‐1. NOTE Before verification, the carbon metric according to ISO 16745-1 is a claim. Only after the verification according to this document can the carbon metric be communicated as a carbon metric declaration.

Sustainability in buildings and civil engineering works - Carbon metric of an existing building during use stage - Part 2: Verification

ISO 16817:2017 建筑环境设计.室内环境.视觉环境的设计工艺

This document provides an integrated design process for high-quality indoor visual environment including architectural and engineering aspects of daylighting and lighting systems for user satisfaction, health, well-being and productivity as well as the energy performance and sustainability of buildings.

Building environment design - Indoor environment - Design process for the visual environment

ISO 16745-1:2017 建筑物和土木工程的可持续性. 现有建筑物在使用阶段的碳排放指标. 第1部分: 计算, 报告和沟通

This document provides requirements for determining and reporting a carbon metric of an existing building, associated with the operation of the building. It sets out methods for the calculation, reporting and communication of a set of carbon metrics for GHG emissions arising from the measured energy use during the operation of an existing building, the measured user-related energy use, and other relevant GHG emissions and removals. These carbon metrics are separated into three measures designated CM1, CM2, and CM3 (see 5.1.1). This document follows the principles set out in ISO 15392 and those described in Clause 4. Where deviations from the principles in ISO 15392 occur, or where more specific principles are stated, this document takes precedence. The carbon metrics CM1 and CM2 are not quantified based on life cycle assessment (LCA) methodology. Carbon metric CM3 may include partial quantification based on the results of LCA. This document does not include any method of modelling of the operational energy use of the building but follows the conventions provided by other International Standards, as given in relevant clauses. This document is not an assessment method for evaluating the overall environmental performance of a building or a building-rating tool and does not include value-based interpretation of the carbon metric(s) through weightings or benchmarking. This document deals with the application of the carbon metric(s) for an existing building, either residential or commercial, or a building complex. It does not include provisions for regional and/or national building stock.

Sustainability in buildings and civil engineering works - Carbon metric of an existing building during use stage - Part 1: Calculation, reporting and communication

ISO 15686-7:2017 房屋和建筑资产.服务寿命规划.第6部分:实践中服务寿命数据的反馈评价性能

This document provides a generic basis for performance evaluation for feedback of service life data from existing buildings and constructed assets, including a definition of the terms to be used and the description of how the (technical) performance can be described and documented to ensure consistencies. The purpose of this document is to describe the principles for service life performance surveys and evaluation with an emphasis on technical recommendations. It describes a generic methodology, including the terms to be used, that provides guidance on the planning, documentation and inspection phases, as well as on analysis and interpretation of performance evaluations, both on the object (single building) and network (stock of buildings) level. While maintenance planning is outside the scope of this document, maintenance-driven inspections and subsequent recommended actions could have significant effects upon service life and performance.

Buildings and constructed assets - Service life planning - Part 7: Performance evaluation for feedback of service life data from practice

T/CECS 465-2017 既有建筑绿色改造技术规程

总则、术语、评估与策划、规划与建筑、结构与材料、暖通空调、给水排水、电气、施工与调试。

Technical regulations for green renovation of existing buildings

T/CDDG 001-2017 淄博市建设工程文件归档标准

主要内容：1、总则；2、术语；3、基本规定；4、归档范围及其质量要求；5、建设工程文件归档内容及要求；6、建设工程档案整理立卷；7、建设工程声像档案编制；8、建设工程电子文件与电子档案编制；9、建设工程档案移交责任书；10、建设工程档案验收；11、建设工程档案报送。

Zibo city construction project file archiving standard

GOST R 57955-2017 油气生产工业的建筑物和设施. 设计标准

Buildings and facilities for oil and gas producing industries. Design standards

GOST 34366-2017 石油及成品油干线管道运输. 施工和组装作业的质量控制. 基本原则规定

Oil and oil products trunk pipeline transport. Quality control of construction and assembling operations. Basic principles provisions

GOST R 57817-2017 地下储气库. 设计标准

Underground gas storage. Design standards

GSO ISO/TS 12720:2016 建筑和土木工程的可持续性 ISO 15392 一般原则应用指南

This Technical Specification provides guidance for the application of the general principles of sustainability in buildings and civil engineering works elaborated in ISO 15392. It shows the different actors involved with the construction works how to take these principles into account in their decision-making processes in order to increase the contribution of the construction works to sustainability and sustainable development. This Technical Specification provides a step-by-step approach for — encouraging the application of the general principles by all stakeholders at each stage of the project and its use, from the decision to build and the initial development of the project brief until the end-of-life of the construction works, — helping interested parties to consider and/or incorporate sustainability thinking in all phases of the building’s or civil engineering works’ life cycle, for all relevant issues of concern, by raising key questions in relation to the general principles, — understanding the outcome (effect) of the application of the general principles, and — building on acquired experience to develop best practices and engendering a continuous improvement process. NOTE See Annex A for the list of the nine general principles.

Sustainability in buildings and civil engineering works -- Guidelines on the application of the general principles in ISO 15392

GSO ISO 15928-5:2016 房屋 性能描述 第5部分：运行能源

This part of ISO 15928 sets out a method for describing the operating energy performance of houses. It covers user needs, provides performance descriptions and outlines evaluation processes. It includes the description of relevant parameters for external and internal climatic conditions, user functional requirements, energy used by the house and energy generated by the house. This part of ISO 15928 is intended to be used for houses that may be separated from, or linked horizontally to, another house(s). Where houses are linked, and some sharing of services occurs, it is intended that energy usage performance may be assessed both for individual houses, as well as a group of houses that are linked together. The ISO 15928 series is intended for use in the evaluation of the design and construction of houses and in the international trading of houses or their sub-systems. The ISO 15928 series does not specify a level of performance and it is not intended to provide a design method and/or criteria. NOTE Structural performance and other attributes are covered in other parts of ISO 15928.

Houses -- Description of performance -- Part 5: Operating energy