91.060.20 屋顶 标准查询与下载

DIN EN 508-1:2009 金属制屋面产品.钢,铝和不锈钢薄板材自撑式产品规范.第1部分:钢,DIN EN 508-1:2009-07的英文版本

This Part of EN 508 specifies requirements for self-supporting roofing products for discontinuous laying made from metallic coated steel sheet with or without additional organic coatings. The standard establishes general characteristics, definitions, classifications and labelling for the products, together with requirements for the materials from which the products can be manufactured. It is intended to be used either by manufacturers to ensure that their products comply with the requirements or by purchasers to verify that the products comply when purchased before they are despatched from the factory. It specifies the requirements for products which enable them to meet all normal service conditions. The standard applies to all discontinuously laid self-supporting external profiled sheets for roofing with the exception of tiles with a surface area less than 1 m2 and produced by stamping. These profiled roof sheets are designed to keep wind, rain and snow out of the building and to transfer any resultant loads and infrequent maintenance loads to the structure. No requirements for supporting construction, design of roof system and execution of connections and flashings are included.

Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 1: Steel; English version of DIN EN 508-1:2009-07

DIN EN 508-2:2009 金属板屋顶产品 钢,铝或不锈钢板自持产品规范 第2部分 铝 英文版本DIN EN 508-2-2009-07

This part of EN 508 specifies requirements for self-supporting roofing products for discontinuous laying made from aluminium sheet with or without additional organic coatings. The standard establishes general characteristics, definitions, classifications and labelling for the products, together with requirements for the materials from which the products can be manufactured. It is intended to be used either by manufacturers to ensure that their products comply with the requirements or by purchasers to verify that the products comply before they are despatched from the factory. It specifies the requirements for products which enable them to meet all normal service conditions. The standard applies to all discontinuously laid self-supporting external profiled sheets for roofing. These profiled roof sheets are designed to keep wind, rain and snow out of the building, and to transfer any resultant loads and infrequent maintenance loads to the structure. No requirements for supporting construction, design of roof system and execution of connections and flashings are included.

Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 2: Aluminium; English version of DIN EN 508-2:2009-07

DIN EN 506:2009 金属片屋顶产品.铜锌片的自支持产品规范,英文版本DIN EN 506:2009-07

This European Standard specifies requirements for self-supporting roofing products for discontinuous laying made from copper or zinc-copper-titanium alloy sheet with or without additional organic coatings. The standard establishes general characteristics, definitions and labelling for the products, together with requirements for the materials from which the products can be manufactured. It is intended to be used either by manufacturers to ensure that their products comply with the requirements or by purchasers to verify that the products comply before they are despatched from the factory. It specifies the requirements for products which enable them to meet all normal service conditions. The standard applies to all discontinuously laid self-supporting external profiled sheets for roofing with the exception of tiles with a surface area less than 1 m2 and produced by stamping. These profiled roof sheets are designed to keep wind, rain and snow out of the building and to transfer any resultant loads and infrequent maintenance loads to the structure. No requirements for supporting construction, design of roof system and execution of connections and flashings are included.

Roofing products of metal sheet - Specification for self-supporting products of copper or zinc sheet; English version of DIN EN 506:2009-07

DIN EN 508-3:2009 金属板屋顶产品.钢,铝或不锈钢板自持产品规范.第3部分:不锈钢.英文版本DIN EN 508-3-2009-07

This Part of EN 508 specifies requirements for self-supporting roofing products for discontinuous laying made from stainless steel sheet with or without additional metallic and/or organic coatings. The standard establishes general characteristics, definitions, classifications and labelling for the products, together with requirements for the materials from which the products can be manufactured. It is intended to be used either by manufacturers to ensure that their products comply with the requirements or by purchasers to verify that the products comply before they are despatched from the factory. It specifies the requirements for products which enable them to meet all normal service conditions. The standard applies to all discontinuously laid self-supporting external profiled sheets for roofing with the exception of tiles with a surface area less than 1 m2 and produced by stamping. These profiled roof sheets are designed to keep wind, rain and snow out of the building and to transfer any resultant loads and infrequent maintenance loads to the structure. No requirements for supporting construction, design of roof system and execution of connections and flashings are included.

Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 3: Stainless steel; English version of DIN EN 508-3:2009-07

SANS 2001-CT2:2009 建设工程.第CT2部分:结构木工结构(屋顶)

Covers the construction of timber roof assemblies in buildings. Includes the manufacture of bolted trusses that are designed in accordance with the requirements of SANS 10400, the erection of prefabricated timber trusses, the erection of rafters and purl

Construction works Part CT2: Structural timberwork (roofing)

BS EN 508-2:2009 金属制屋面产品 钢、铝和不锈钢薄板材自撑式产品规范 铝

Roofing products from metal sheet - Specification for self supporting products of steel, aluminium or stainless steel sheet - Aluminium

BS EN 508-1:2008 金属薄板制屋面材料产品.钢、铝或不锈钢薄板材.钢

This Part of EN 508 specifies requirements for self-supporting roofing products for discontinuous laying made from metallic coated steel sheet with or without additional organic coatings. The standard establishes general characteristics, definitions, classifications and labelling for the products, together with requirements for the materials from which the products can be manufactured. It is intended to be used either by manufacturers to ensure that their products comply with the requirements or by purchasers to verify that the products comply when purchased before they are despatched from the factory. It specifies the requirements for products which enable them to meet all normal service conditions. The standard applies to all discontinuously laid self-supporting external profiled sheets for roofing with the exception of tiles with a surface area less than 1 ㎡ and produced by stamping. These profiled roof sheets are designed to keep wind, rain and snow out of the building and to transfer any resultant loads and infrequent maintenance loads to the structure. No requirements for supporting construction, design of roof system and execution of connections and flashings are included.

Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Steel

BS EN 508-3:2008 金属薄板制屋面材料产品.钢、铝或不锈钢薄板材制自支撑产品.不锈钢

This Part of EN 508 specifies requirements for self-supporting roofing products for discontinuous laying made from stainless steel sheet with or without additional metallic and/or organic coatings. The standard establishes general characteristics, definitions, classifications and labelling for the products, together with requirements for the materials from which the products can be manufactured. It is intended to be used either by manufacturers to ensure that their products comply with the requirements or by purchasers to verify that the products comply before they are despatched from the factory. It specifies the requirements for products which enable them to meet all normal service conditions. The standard applies to all discontinuously laid self-supporting external profiled sheets for roofing with the exception of tiles with a surface area less than 1 ㎡ and produced by stamping. These profiled roof sheets are designed to keep wind, rain and snow out of the building and to transfer any resultant loads and infrequent maintenance loads to the structure. No requirements for supporting construction, design of roof system and execution of connections and flashings are included.

Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Stainless steel

BS EN 508-2:2008 金属薄板屋面材料产品.钢、铝或不锈钢薄板材制自支撑产品规范.铝

This part of EN 508 specifies requirements for self-supporting roofing products for discontinuous laying made from aluminium sheet with or without additional organic coatings. The standard establishes general characteristics, definitions, classifications and labelling for the products, together with requirements for the materials from which the products can be manufactured. It is intended to be used either by manufacturers to ensure that their products comply with the requirements or by purchasers to verify that the products comply before they are despatched from the factory. It specifies the requirements for products which enable them to meet all normal service conditions. The standard applies to all discontinuously laid self-supporting external profiled sheets for roofing. These profiled roof sheets are designed to keep wind, rain and snow out of the building, and to transfer any resultant loads and infrequent maintenance loads to the structure. No requirements for supporting construction, design of roof system and execution of connections and flashings are included.

Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Aluminium

BS EN 506:2008 金属薄板材制屋顶材料产品.铜或锌薄板材制直支撑式产品规范

This European Standard specifies requirements for self-supporting roofing products for discontinuous laying made from copper or zinc-copper-titanium alloy sheet with or without additional organic coatings. The standard establishes general characteristics, definitions and labelling for the products, together with requirements for the materials from which the products can be manufactured. It is intended to be used either by manufacturers to ensure that their products comply with the requirements or by purchasers to verify that the products comply before they are despatched from the factory. It specifies the requirements for products which enable them to meet all normal service conditions. The standard applies to all discontinuously laid self-supporting external profiled sheets for roofing with the exception of tiles with a surface area less than 1 ㎡ and produced by stamping. These profiled roof sheets are designed to keep wind, rain and snow out of the building and to transfer any resultant loads and infrequent maintenance loads to the structure. No requirements for supporting construction, design of roof system and execution of connections and flashings are included.

Roofing products of metal sheet - Specification for self-supporting products of copper or zinc sheet

GSO IEC 60335-2-83:2009 家用和类似电器 安全 第2-83部分：从天花板上方排水的加热凹槽的特殊要求

Deals with the safety of electrically heated gullies for de-icing the inlet of the drainage system of flat roofs, balconies, and similar structures. The rated voltage is not more than 250 V. This consolidated version consists of the first edition (2001) and its amendment 1 (2008). Therefore, no need to order amendment in addition to this publication.

Household and similar electrical appliances - Safety - Part 2-83 : Particular requirements for heated gullies for roof drainage

DIN EN 60335-2-83:2009 家用和类似用途电器.安全性.第2-83部分:屋顶排水用加热集水沟的特殊要求

Household and similar electrical appliances - Safety - Part 2-83: Particular requirements for heated gullies for roof drainage (IEC 60335-2-83:2001 + A1:2008); German version EN 60335-2-83:2002 + A1:2008

DS/EN 506:2009 金属板屋面产品 铜或锌板自支撑产品规范

This European Standard specifies requirements for self-supporting roofing products for discontinuous laying made from copper or zinc-copper-titanium alloy sheet with or without additional organic coatings.The standard establishes general characteristics, definitions and labelling for the products, together with requirements for the materials from which the products can be manufactured. It is intended to be used either by manufacturers to ensure that their products comply with the requirements or by purchasers to verify that the products comply before they are despatched from the factory. It specifies the requirements for products which enable them to meet a

Roofing products of metal sheet - Specification for self-supporting products of copper or zinc sheet

DS/EN 508-2:2009 金属板屋顶产品 钢、铝或不锈钢板自支撑产品规范 第2部分：铝

This part of EN 508 specifies requirements for self-supporting roofing products for discontinuous laying made from aluminium sheet with or without additional organic coatings.The standard establishes general characteristics, definitions, classifications and labelling for the products, together with requirements for the materials from which the products can be manufactured. It is intended to be used either by manufacturers to ensure that their products comply with the requirements or by purchasers to verify that the products comply before they are despatched from the factory. It specifies the requirements for products which enable them to meet all normal ser

Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 2: Aluminium

DS/EN 508-1:2009 金属板屋顶产品 钢、铝或不锈钢板自支撑产品规范 第1部分：钢

This Part of EN 508 specifies requirements for self-supporting roofing products for discontinuous laying made from metallic coated steel sheet with or without additional organic coatings. The standard establishes general characteristics, definitions, classifications and labelling for the products, together with requirements for the materials from which the products can be manufactured. It is intended to be used either by manufacturers to ensure that their products comply with the requirements or by purchasers to verify that the products comply when purchased before they are despatched from the factory. It specifies the requirements for products which enable

Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 1: Steel

ANSI/SPRI RD-1-2009 改型排水管的性能标准

This standard is a reference on retrofit roof drains which are designated for installation in existing drain plumbing on existing roofs. This standard does not addresss roof design criteria.

Performance Standard for Retrofit Drains

ANSI/UL 580-2009 屋顶组件抗隆起试验标准

Recirculation of paragraphs 6.3.1 and 8.4 of the Fifth Edition of the Standard for Tests for Uplift Resistance of Roof Assemblies UL 580, as an American National Standard.

Standard for Tests for Uplift Resistance of Roof Assemblies

LST EN 60335-2-83-2003/A1-2008 家用和类似用途电器 安全 第 2-83 部分：屋顶排水用加热排水沟的特殊要求（IEC 60335-2-83:2001/A1:2008）

Household and similar electrical appliances - Safety - Part 2-83: Particular requirements for heated gullies for roof drainage (IEC 60335-2-83:2001/A1:2008)

LST EN 506-2008 金属板屋面产品 铜或锌板自支撑产品规范

Roofing products of metal sheet - Specification for self-supporting products of copper or zinc sheet

LST EN 508-1-2008 金属板屋顶产品 钢、铝或不锈钢板自支撑产品规范 第1部分：钢

Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 1: Steel