91.060.20 屋顶 标准查询与下载
共找到 489 条与 屋顶 相关的标准，共 33 页
Roofing products of metal sheet - Specification for self-supporting products of copper or zinc sheet
- ICS
- 91.060.20
- CCS
- 发布
- 2008-11-14
- 实施
- 2008-11-14
Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 3: Stainless steel
- ICS
- 91.060.20
- CCS
- 发布
- 2008-11-14
- 实施
- 2008-11-14
This Part of EN 508 specifies requirements for self-supporting roofing products for discontinuous laying made from stainless steel sheet with or without additional metallic and/or organic coatings.The standard establishes general characteristics, definitions, classifications and labelling for the products, together with requirements for the materials from which the products can be manufactured. It is intended to be used either by manufacturers to ensure that their products comply with the requirements or by purchasers to verify that the products comply before they are despatched from the factory. It specifies the requirements for products which enable them
Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 3: Stainless steel
- ICS
- 91.060.20
- CCS
- 发布
- 2008-10-23
- 实施
- 2008-10-23
Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 2 : aluminium.
- ICS
- 91.060.20
- CCS
- Q73
- 发布
- 2008-09-01
- 实施
- 2008-09-20
Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 3 : stainless steel.
- ICS
- 91.060.20
- CCS
- Q73
- 发布
- 2008-09-01
- 实施
- 2008-09-20
Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 1 : steel.
- ICS
- 91.060.20
- CCS
- Q73
- 发布
- 2008-09-01
- 实施
- 2008-09-20
Deals with the safety of electrically heated gullies for de-icing the inlet of the drainage system of flat roofs, balconies, and similar structures. The rated voltage is not more than 250 V.This standard however, in general, does not take into account the use of appliances by- persons (including children) whose *physical, sensory or mental capabilities; or *lack of experience and knowledgeprevent them from using the appliance safely without supervision or instruction;- children playing with the appliance.
Household and similar electrical appliances - Safety - Part 2-83: Particular requirements for heated gullies for roof drainage
- ICS
- 91.060.20
- CCS
- 发布
- 2008-08-29
- 实施
- 2008-08-29
Household and similar electrical appliances - Safety - Part 2-83: Particular requirements for heated gullies for roof drainage
- ICS
- 91.060.20
- CCS
- 发布
- 2008-07-15
- 实施
This European Standard specifies requirements for self-supporting roofing products for discontinuous laying made from copper or zinc-copper-titanium alloy sheet with or without additional organic coatings. The standard establishes general characteristics, definitions and labelling for the products, together with requirements for the materials from which the products can be manufactured. It is intended to be used either by manufacturers to ensure that their products comply with the requirements or by purchasers to verify that the products comply before they are despatched from the factory. It specifies the requirements for products which enable them to meet all normal service conditions. The standard applies to all discontinuously laid self-supporting external profiled sheets for roofing with the exception of tiles with a surface area less than 1 m2 and produced by stamping. These profiled roof sheets are designed to keep wind, rain and snow out of the building and to transfer any resultant loads and infrequent maintenance loads to the structure. No requirements for supporting construction, design of roof system and execution of connections and flashings are included.
Roofing products of metal sheet - Specification for self- supporting products of copper or zinc sheet
- ICS
- 91.060.20
- CCS
- 发布
- 2008-07-01
- 实施
This clause of part 1 is replaced by: This international standard deals with the safety of electrically heated gullies for de-icing the inlet of the drainage system of flat roofs, balconies, and similar structures, their rated voltage being not more than 250 V. As far as is practicable, this standard deals with the common hazards presented by appliances which are encountered by all persons in and around the home. However, in general, it does not take into account - persons (including children) whose ~ physical, sensory or mental capabilities; or ~ lack of experience and knowledge prevents them from using the appliance safely without supervision or instruction; - children playing with the appliance. NOTE 101 Attention is drawn to the fact that in many countries additional requirements are specified by the national health authorities, the national authorities responsible for the protection of labour and similar authorities. NOTE 102 This standard does not apply to appliances intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapour or gas).
Household and similar electrical appliances - Safety - Part 2-83: Particular requirements for heated gullies for roof drainage
- ICS
- 91.060.20
- CCS
- Q83
- 发布
- 2008-07-01
- 实施
This part of EN 508 specifies requirements for self-supporting roofing products for discontinuous laying made from aluminium sheet with or without additional organic coatings.The standard establishes general characteristics, definitions, classifications and labelling forThe products, together with requirements forThe materials from whichThe products can be manufactured. It is intended to be used either by manufacturers to ensure thatTheir products comply withThe requirements or by purchasers to verify thatThe products comply beforeThey are despatched fromThe factory. It specifies the requirements for products which enableThem to meet all normal service conditions.The standard applies to all discontinuously laid self-supporting external profiled sheets for roofing.These profiled roof sheets are designed to keep wind, rain and snow out of the building, and to transfer any resultant loads and infrequent maintenance loads toThe structure. No requirements for supporting construction, design of roof system and execution of connections and flashings are included.
Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 2: Aluminium
- ICS
- 91.060.20
- CCS
- 发布
- 2008-07-01
- 实施
This part of EN 508 specifies requirements for self-supporting roofing products for discontinuous laying made from metallic coated steel sheet with or without additional organic coatings. The standard establishes general characteristics; definitions; classifications and labelling for the products; together with requirements for the materials from which the products can be manufactured. It is intended to be used either by manufacturers to ensure that their products comply with the requirements or by purchasers to verify that the products comply when purchased before they are despatched from the factory. It specifies the requirements for products which enable them to meet all normal service conditions. The standard applies to all discontinuously laid self-supporting external profiled sheets for roofing with the exception of tiles with a surface area less than 1 m2 and produced by stamping. These profiled roof sheets are designed to keep wind; rain and snow out of the building and to transfer any resultant loads and infrequent maintenance loads to the structure. No requirements for supporting construction; design of roof system and execution of connections and flashings are included.
Roofing products from metal sheet - Specification for selfsupporting products of steel, aluminium or stainless steel sheet - Part 1: Steel
- ICS
- 91.060.20
- CCS
- 发布
- 2008-07-01
- 实施
This part of EN 508 specifies requirements for self-supporting roofing products for discontinuous laying made from stainless steel sheet with or without additional metallic and/or organic coatings. The standard establishes general characteristics; definitions; classifications and labelling for the products; together with requirements for the materials from which the products can be manufactured. It is intended to be used either by manufacturers to ensure that their products comply with the requirements or by purchasers to verify that the products comply before they are despatched from the factory. It specifies the requirements for products which enable them to meet all normal service conditions. The standard applies to all discontinuously laid self-supporting external profiled sheets for roofing with the exception of tiles with a surface area less than 1 m2 and produced by stamping. These profiled roof sheets are designed to keep wind; rain and snow out of the building and to transfer any resultant loads and infrequent maintenance loads to the structure. No requirements for supporting construction; design of roof system and execution of connections and flashings are included.
Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 3: Stainless steel
- ICS
- 91.060.20
- CCS
- 发布
- 2008-07-01
- 实施
本标准规定了纤维增强塑料机械成型用不饱和聚酯树脂（以下简称树脂）的术语和定义、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于以苯乙烯为主要交联单体，用于缠烧、模压、拉挤、连续板材工艺的不饱和聚酯树脂。
Unsaturated polyester resin for mechanically transformed fiber reinforced plastics
- ICS
- 91.060.20
- CCS
- G32;Q23
- 发布
- 2008-06-16
- 实施
- 2008-12-01
This standard is Household and similar electrical appliances - Safety - Part 2-83: Particular requirements for heated gullies for roof drainage; Amendment 1.
Household and similar electrical appliances - Safety - Part 2-83: Particular requirements for heated gullies for roof drainage; Amendment 1
- ICS
- 91.060.20
- CCS
- Q83
- 发布
- 2008-04
- 实施
- 2008-07-17
この規格は，木造。鉄骨造，鉄筋コンクリート造，鉄骨鉄筋コンクリート造などの建築物及び構造物における，屋根工事及び小屋組の建方工事に使用する足場及び装備機材(以下，屋根工事用足場という。)並びにそれらの施工方法について規定する。ただし，品質特性について規定するのは，足場に区分する渡り歩廊，はしご形足場及び可動式足場並びに装備機材に区分するチがかり枠.チすり枠，墜落防護さく（柵）及び兼用ネットである。
Scaffolding for roof construction and installation
- ICS
- 91.060.20
- CCS
- Q17
- 发布
- 2008-03-25
- 实施
Building components (Concrete panel for roof) (Amendment 1)
- ICS
- 91.060.20
- CCS
- Q72
- 发布
- 2008-03-20
- 实施
5.1 This practice develops treatment factors that shall be used by fire retardant chemical manufacturers to adjust bending strength design values for untreated plywood to account for the fire-retardant treatment effects. This practice uses data from reference thermal-load cycles designed to simulate temperatures in sloped roofs of common design to evaluate products for 50 iterations. 5.2 This practice applies to material installed using construction practices recommended by the fire retardant chemical manufacturers that include avoiding exposure to precipitation, direct wetting, or regular condensation. This practice is not meant to apply to buildings with significantly different designs than those described in 1.3. 5.3 Test Method D5516 caused thermally induced strength losses in laboratory simulations within a reasonably short period. The environmental conditions used in the laboratory-activated chemical reactions that are considered to be similar to those occurring in the field. This assumption is the fundamental basis of this practice. 1.1 This practice covers procedures for calculating bending strength design adjustment factors for fire-retardant-treated plywood roof sheathing. The methods utilize the results of strength testing after exposure at elevated temperatures and computer-generated thermal load profiles reflective of exposures encountered in normal service conditions in a wide variety of continental United States climates. 1.2 Necessarily, common laboratory practices were used to develop the methods herein. It is assumed that the procedures will be used for fire-retardant-treated plywood installed using appropriate construction practices recommended by the fire retardant chemical manufacturers, which include avoiding exposure to precipitation, direct wetting, or regular condensation. 1.3 The heat gains, solar loads, roof slopes, ventilation rates, and other parameters used in this practice were chosen to reflect common sloped roof designs. This practice is applicable to roofs of 3 in 12 or steeper slopes, to roofs designed with vent areas and vent locations conforming to national standards of practice, and to designs in which the bottom side of the sheathing is exposed to ventilation air. These conditions may not apply to significantly different designs and therefore this practice may not apply to such designs. 1.4 Information and a brief discussion supporting the provisions of this practice are in the Commentary in the appendix. A large, more detailed, separate Commentary is also available from ASTM.2 1.5 The methodology in this practice is not meant to account for all reported instances of fire-retardant plywood undergoing premature heat degradation. 1.6 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard......
Standard Practice for Calculating Bending Strength Design Adjustment Factors for Fire-Retardant-Treated Plywood Roof Sheathing
- ICS
- 91.060.20
- CCS
- 发布
- 2008
- 实施
WATERPROOFING SHEETS OF RECYCLED SYNTHETIC POLYMER
- ICS
- 91.060.20
- CCS
- 发布
- 2007-12-28
- 实施
이 규격은 지붕 잇기 공사에 주로 사용하는 가압 시멘트 판 기와(이하 기와라 한다.)에 대
Pressed cement roof tiles
- ICS
- 91.060.20
- CCS
- Q11
- 发布
- 2007-12-04
- 实施
- 2007-12-04
