91.060.20 屋顶 标准查询与下载

JIS C 9335-2-83:2007 家用及类似用途电器.安全.第2-83部分:屋顶排水用加热集水沟的特殊要求

この規格は，バルコニー，平らな屋根及びそれに類する構造物に設置する，定格電圧250 V以下の電熱式雨どい凍結防止器の安全性について規定する。

Household and similar electrical appliances -- Safety -- Part 2-83: Particular requirements for heated gullies for roof drainage

BS EN 14964:2006 非连续屋顶盖法用硬质衬垫物.定义和特征

This European Standard specifies the technical requirements for factory made flat or profiled sheets (woodbased, fibre cement flat sheets or corrugated bituminous sheets or other materials which can be characterised as one of these materials) that are used as underlays in pitched roof constructions with discontinuously laid coverings (e.g. tiles, slates). This European Standard also establishes methods of inspection and testing as well as criteria for evaluation of conformity. This European Standard does not include rigid underlays which have a stiffening function or a load bearing function.

Rigid underlays for discontinuous roofing - Definitions and characteristics

BS EN 14963:2006 屋顶覆盖物.带或不带竖立支架的连续塑料天窗.分级、要求和试验方法

This European Standard specifies requirements for continuous rooflights made of plastic materials (e.g. GF-UP, PC, PMMA, PVC) with or without bearing profiles to be used with upstands made of e.g. GF-UP, PVC, steel, aluminium, wood or concrete, for laying in roofs, which serve the purpose of lighting by means of daylight and, possibly, of ventilating interior spaces by means of opening devices. This European Standard applies to continuous rooflights without upstand and to continuous rooflights, where a single manufacturer provides all components of the rooflight with upstand, which are bought in a single purchase. Products covered by this European Standard may be supplied as continuous rooflights with and without upstand and rooflights intended to be used with an upstand, for which the upstand is specified, but not supplied. It applies to continuous rooflights when mounted with an inclination δ in the longitudinal direction not more than 10° to the horizontal and not more than 10° in the transversal direction (see Figure 1): a) with bearing profiles:  symmetrical, angled, curved (see Figure 2) or flat (see Figure 3);  constructed with bearing profiles parallel to the span and with a rectangular ground plan; b) without bearing profiles:  symmetrical, angled or curved with an α angle not more than 45° (measured to the horizontal at the line of fixing, see Figure 4);  constructed with a span (width) lower than or equal 2,5 m and with a rectangular ground plan. This European Standard applies to continuous rooflights, including barrel vault rooflights, with a rectangular ground plan of plastic glazing laying in roofs having, in addition a minimum distance of b/3 (b = effective span of rooflights, corresponding to the light opening). The upstands may be self-supporting or non self-supporting. The design of the upstand is not part of this European Standard. Upstands can be prefabricated or site fabricated. Prefabricated upstands are to be considered as part of the continuous rooflight. Site fabricated upstands are not covered by this European Standard. This European Standard does not include calculation with regard to works, design requirements and installation techniques. The possible additional functions of smoke and heat ventilation in case of fire, and/or roof access are outside the scope of this European Standard.

Roof coverings - Continuous rooflights of plastics with or without upstands - Classification, requirements and test methods

KS F 4913-2006(2021) 织物沥青屋顶

Woven fabrics asphalt roofings

KS F 4913-2006(2016) 机织面料沥青屋面

Woven fabrics asphalt roofings

KS F 4913-2006 沥青涂覆机织物屋面板

이 규격은 방수ㆍ방습 공사 등에 사용되는 직조망 아스팔트 루핑(이하 루핑이라 한다.)에 대

Woven fabrics asphalt roofings

SANS 10407:2006 茅草屋顶的建造

Specifies the requirements and methods of construction for thatched roofs of span not exceeding 6 m and supported by structural walls. It also provides information on grasses commonly used for thatching in Southern Africa, with their geographical locatio

Thatched roof construction

LST EN 517-2006 屋顶用预制配件 屋顶安全钩

Prefabricated accessories for roofing - Roof safety hooks

DS/EN 12691:2006 防水用软板 屋顶防水用沥青、塑料和橡胶板 抗冲击性的测定

This European Standard specifies a test for puncture by impact on sheets for roof waterproofing. Mechanical stress on waterproofing sheets ranges from static long-term loads to dynamic short-term loads. This method represents the dynamic category of load where puncture may be caused by impact.This European Standard may also be applied for other purposes of waterproofing.

Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of resistance to impact

DS/CEN/TS 15087:2006 屋顶用粘土和混凝土联锁瓦的抗拔力的测定 机械紧固件的试验方法

This Technical Specification specifies a test method for determining the strength and uplift resistance of fasteners for clay and concrete interlocking tiles for roofing.

Determination of the uplift resistance of installed clay and concrete interlocking tiles for roofing - Test method for mechanical fasteners

DS/EN 516:2006 屋顶用预制附件 屋顶通道装置 人行道、踏板和台阶

This document applies to installations for roof access (building products) permanently fixed to the load-bearing construction of pitched roofs, to stand or to walk on during inspection, maintenance and repair of facilities on the roof.It specifies essential dimensions, materials to be used, requirements with respect to the load-bearing capacity of the installation for roof access fastened to the roof construction including their fastening system, and the extent of testing.This document does not apply to permanently fixed ladders on pitched roofs.

Prefabricated accessories for roofing - Installations for roof access - Walkways, treads and steps

DS/EN 517:2006 屋顶用预制配件 屋顶安全钩

This document applies to roof safety (building products) situated on the surface of pitched roofs and permanently fixed to the load-bearing roof construction. They are intended for the attachment of slaters' ladders, for supporting working platforms and as anchorage points to which personal protective equipment against falls or for restraint are attached.It specifies essential dimensions, materials to be used, requirements with respect to the load-bearing capacity, of the roof safety hooks fastened to the roof construction including their fastening system and the extent of testing.This document does not apply to installations which are used exclusively as a

Prefabricated accessories for roofing - Roof safety hooks

NF P34-205-1/A1:2006 DTU 40.35 建筑工程 涂层钢板肋板屋顶 第1部分：技术条款

DTU 40.35 - Travaux de bâtiment - Couvertures en plaques nervurées issues de tôles d'acier revêtues - Partie 1 : cahier des clauses techniques

NF P37-420:2006 屋顶层用预制附件.塑料单个屋顶灯.产品规范和试验方法

Prefabricated accessories for roofing - Individual roof lights of plastics - Product specification and test methods.

BS EN 516:2006 屋面用预制备件.屋顶通路的安装.过道、踏板和台阶

This document applies to installations for roof access (building products) permanently fixed to the load-bearing construction of pitched roofs, to stand or to walk on during inspection, maintenance and repair of facilities on the roof. It specifies essential dimensions, materials to be used, requirements with respect to the load-bearing capacity of the installation for roof access fastened to the roof construction including their fastening system, and the extent of testing. This document does not apply to permanently fixed ladders on pitched roofs.

Prefabricated accessories for roofing - Installations for roof access - Walkways, treads and steps

JC/T 1009-2006 玻璃纤维增强塑料复合检查井盖

本标准规定了玻璃纤维增强塑料与树脂混凝土复合成型的玻璃纤维增强塑料复合检查井盖(以下简称检查井盖)的产品分类、技术要求、试验方法、检验规则和产品标志、包装、运输和贮存。 本标准适用于安装在高等级公路、公路、城市道路和机动车可能行驶或停放的地面以及人行道、绿化带的检查井盖。

Glass fiber reinforced composite inspection well lid

JC/T 781-2006 蜂窝型芯子胶条分离强度试验方法

本标准规定了蜂窝型芯子胶条分离强度试验的原理、试样、条件、步骤和结果计算。 本标准适用于测定蜂窝型芯子胶条的线分离强度和面分离强度。

Test method for delamiation strength of honeycomb core

JC/T 1010-2006 卫星地球接收站用片状模塑料(SMC)天线反射面

本标准规定了卫星地球接收站用以片状模塑料(以下简称SMC)为型面材料，以内嵌金属铝网为电波反射层的模压天线反射面的产品分类、技术要求、试验方法、检验规则以及标志、包装、运输和贮存。 本标准适用于卫星地球接收站用SMC天线反射面(以下简称反射面)。

Antenna reflectors made of sheet molding compound (SMC) for satellite earth receive-only station

DIN EN 517:2006 屋顶预制附件.屋顶安全吊钩

This European standard applies to hooks situated on the surface of pitched roofs and permanently fixed on the the load bearing roof construction. They are intended for the attachment of slaters' ladders, for supporting working platforms and as anchorage points to which personal protective equipment against falls or for restraint are attached. It specifies essential dimensions, materials to be used, requirements with respect to the load-bearing capacity, and the extent of testing.

Prefabricated accessories for roofing - Roof safety hooks English version of DIN EN 517:2006-05

LST EN 516-2006 屋顶用预制附件 屋顶通道装置 人行道、踏板和台阶

Prefabricated accessories for roofing - Installations for roof access - Walkways, treads and steps