91.060.30 天花板、地板、楼梯 标准查询与下载

T/CBCA 003-2019 浮筑楼板保温隔声系统应用技术规程

本规程的主要技术内容：1.总则；2术语；3.性能要求；4.设计；5.施工；6.验收。

Technical specification for thermal and sound insulation system of floating floor

T/GDAC 1-2018 金属及金属复合材料吊顶板

本标准规定了金属及金属复合材料吊顶板的术语和定义、分类代号、分级及标记、原材料、要求、实验方法、检验规则、标志、包装、运输、贮存及随行文件。本标准适用于建筑装饰装修用吊顶板。

Metal and metal composite ceiling panels

ASTM F710-19e1 制备混凝土地板以接收弹性地板的标准做法

Standard Practice for Preparing Concrete Floors to Receive Resilient Flooring

ASTM F710-19 制备混凝土地板以接收弹性地板的标准做法

Standard Practice for Preparing Concrete Floors to Receive Resilient Flooring

KS F 4527-2018 BRASS防滑

Standard specification for brass non-slip

T/SBMIA 006-2018 木质地板行业诚信经营服务规范

本标准规定了木质地板企业经营活动中的范围与适用、标准引用的规范性文件、术语与定义、要求。

Wooden flooring industry credit management service speaification

T/SBMIA 007-2018 绿色木质地板评价

本标准规定了绿色木质地板产品的术语和定义、产品分类、评价要求、检验方法、评价方法。

Green wooden flooring assessment

ASTM E989-18 冲击噪声的单数值度量测定的标准分类

Standard Classification for Determination of Single-Number Metrics for Impact Noise

ASTM F2195-18 油毡地砖的标准规范

1.1 This specification covers floor tiles made of a homogeneous mixture of linoleum cement binder calendered or pressed onto a fibrous or suitable backing. This specification also covers linoleum floor tile without backing. 1.2 Four types of linoleum floor tile are covered. The floor covering is intended for use in commercial, light commercial, and residential buildings based on serviceability characteristics. General information and performance characteristics, which determine serviceability and recommended use, are included in this document. 1.3 The following safety hazards caveat pertains only to the test methods portion, Sections 7 and 8, of this specification. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Linoleum Floor Tile

ASTM F2034-18 薄油毡地板覆盖物的标准规范

1.1 This specification covers sheet linoleum floor covering. 1.2 Three types of linoleum floor covering are covered (see Section 4). These floor coverings are intended for use in commercial, light commercial, and residential buildings based on serviceability characteristics. General information and performance characteristics, which determine serviceability and recommended use, are included in this specification. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 The following safety hazards caveat pertains only to the test methods portion, Section 11, of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Sheet Linoleum Floor Covering

JIS A 5901:2018 草编塌塌咪和草编芯材塌塌咪(日本席垫芯材)

Straw TATAMIDOKO and straw sandwich TATAMIDOKO

JIS A 5914:2018 非稻草的塌塌咪

Non straw TATAMIDOKO

T/ZZB 0411-2018 顶墙集成

本标准规定了顶墙集成产品的术语和定义、分类、基本要求、技术要求、试验方法、检验规则、标志、包装、运输、贮存、质量承诺。 本标准适用于建筑室内装饰装修用途顶墙集成产品。

The top wall integration

EN ISO 16283-2:2018 声学.建筑物及建筑构件中隔声的现场测量.第二部分:撞击声隔音测量（

Acoustics - Field measurement of sound insulation in buildings and of building elements - Part 2: Impact sound insulation

ASTM F2199-18 确定耐热地板后尺寸稳定性的标准试验方法

1.1 This test method covers the determination of the change in linear dimensions of resilient floor tile/plank products after exposure to heat and reconditioning to ambient temperature. 1.2 This test method allows one to also measure curling that can occur after a specimen has been exposed to heat and reconditioned back to ambient temperature. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Determining Dimensional Stability of Resilient Floor Tile after Exposure to Heat

JIS A 5917:2018 减少影响 TATAMIDOKO

Impact reducing TATAMIDOKO

JG/T 562-2018 预制混凝土楼梯

precast concrete stairs

JG/T 558-2018 楼梯栏杆及扶手

Stair railings and handrails

ASTM E894-18 建筑物用永久金属护栏系统和导轨锚固的标准试验方法

1.1 This test method describes procedures to be followed in testing the performance of the anchorage of all types of new and existing permanent metal railing systems (guard, stair, and ramp-rail systems), and rails (hand, grab, and transfer rails) installed in and for agricultural, assembly, commercial, educational, industrial, institutional, recreational, and residential buildings. 1.2 This test method is applicable to railing systems and rails having major structural components made of metal and secondary components made of metal or other materials such as wood, plastics, and glass. 1.3 The test method described can be used to determine whether the anchorage of permanent metal railing systems and rails complies with anticipated performance requirements. 1.4 Specifically, this test method covers procedures for determining the static tension, shear, and moment resistance of anchorages for permanent metal railing systems, and rails in structural elements made of concrete, masonry, wood, and metal as well as related products. 1.5 No consideration is given in this test method to any possible deterioration of anchorage systems, resulting from adverse environmental conditions. The performance of special tests covering this aspect may be desirable. 1.6 Should computations make it possible to provide the needed information, testing may be employed for purposes of verification. 1.7 The values stated in SI units are to be regarded as standard. The values given in parentheses are mathematical conversions to inch-pound units that are provided for information only and are not considered standard. 1.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see Section 6. 1.9 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Anchorage of Permanent Metal Railing Systems and Rails for Buildings

ASTM C627-18e1 用罗宾逊型地板测试仪评估瓷砖安装系统的标准试验方法

1.1 This test method covers the evaluation of ceramic floor tile installation systems, using the Robinson2 -type floor tester. 1.2 This test method is intended solely for evaluating complete ceramic floor tile installation systems for failure under dynamic loads and not for evaluating particular characteristics of ceramic tile, such as abrasion resistance. This test method does not claim to provide meaningful results for other than evaluating complete ceramic floor tile installation systems. 1.3 The values stated in inch-pound units are to be regarded as the standard. The metric (SI) units in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Evaluating Ceramic Floor Tile Installation Systems Using the Robinson-Type Floor Tester