91.060.30 天花板、地板、楼梯 标准查询与下载
共找到 433 条与 天花板、地板、楼梯 相关的标准，共 29 页
Halogen-free flame-retardant wood-plastic floor engineering technical regulations
- ICS
- 91.060.30
- CCS
- Q18
- 发布
- 2015-03-04
- 实施
- 2015-05-04
1.1 This test method covers the following procedures for determining the structural properties of segments of floor and roof constructions: Section Test Specimens 5 Loading 6 Deformation Measurements 7 Report 8 Precision and Bias 9 Testing Floors Transverse Load 10 Concentrated Load 11 Testing Roofs Transverse Load 12 Concentrated Load 13 1.2 This test method serves to evaluate the performance of floors and roofs panels subjected to (1) Uniform loading, and (2) Concentrated static loading, which represent conditions sustained in the actual performance of the element. The standard is not intended for the evaluation of individual structural framing or supporting members (floor joist, rafters, and trusses), or both. 1.3 The text of this standard references notes and footnotes which provide explanatory material. These notes and footnotes, excluding those in tables and figures, shall not be considered as requirements of the standard. 1.4 This standard is not intended to cover concrete floor slabs. 1.5 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Test Method for Conducting Transverse and Concentrated Load Tests on Panels used in Floor and Roof Construction
- ICS
- 91.060.30
- CCS
- 发布
- 2015-03-01
- 实施
Stairs in buildings - Terminology, measuring rules, main dimensions
- ICS
- 91.060.30
- CCS
- P32
- 发布
- 2015-03
- 实施
Floors. Test method of bearing ability
- ICS
- 91.060.30
- CCS
- P32
- 发布
- 2015
- 实施
- 2015-09-01
Precast concrete panel for floor
- ICS
- 91.060.30
- CCS
- 发布
- 2014-12-02
- 实施
- 2014-12-02
BS EN 14716. Stretched ceilings. Requirements and test methods
- ICS
- 91.060.30
- CCS
- 发布
- 2014-10-20
- 实施
- 2014-10-20
本标准规定了同质聚氯乙烯卷材地板(简称PVC地板)的术语和定义、产品分类、要求、试验方法、检验规则、标志、包装、运输和贮存。本标准适用于工业与民用建筑室内用同质聚氯乙烯(PVC)卷材地板,及其以卷材切成的块材产品。
Homogeneous chloride floor covering sheets
- ICS
- 91.060.30
- CCS
- Q22
- 发布
- 2014-09-29
- 实施
- 2015-04-01
Building works - Timber stairs and associated guard-rails - Part 3 : design requirements
- ICS
- 91.060.30
- CCS
- 发布
- 2014-09-06
- 实施
- 2014-09-06
Building works - Timber stairs and associated guar-drails - Part 2 : contract bill of special administrative model clauses (CCS)
- ICS
- 91.060.30
- CCS
- 发布
- 2014-09-06
- 实施
- 2014-09-06
Building works - Timber stairs and associated guar-drails - Part 1-1 : contract bill of technical model clauses
- ICS
- 91.060.30
- CCS
- 发布
- 2014-09-06
- 实施
- 2014-09-06
Building works - Timber stairs and associated guar-drails - Part 1-2 : general criteria for the selection of materials
- ICS
- 91.060.30
- CCS
- 发布
- 2014-09-06
- 实施
- 2014-09-06
Timber stairs - Structural design - Calculation methods; German version EN 16481:2014
- ICS
- 91.060.30
- CCS
- Q71
- 发布
- 2014-09-01
- 实施
Suspended ceilings - Requirements and test methods; German version EN 13964:2014
- ICS
- 91.060.30
- CCS
- P32
- 发布
- 2014-08-01
- 实施
Suspended ceilings - Requirements and test methods
- ICS
- 91.060.30
- CCS
- 发布
- 2014-07-31
- 实施
- 2014-07-31
Timber stairs. Structural design. Calculation methods
- ICS
- 91.060.30
- CCS
- Q71;P32
- 发布
- 2014-06-30
- 实施
- 2014-06-30
La présente Norme européenne couvre les éléments d'habillage, les éléments individuels des ossatures, les ossatures vendues sous forme de kits et les plafonds suspendus vendus sous forme de kits destinés à être mis sur le marché. Elle couvre les plafonds suspendus vendus sous forme de kits complets, les ossatures mises sur le marché sous forme de kits, les éléments (produits) individuels de ces ossatures et les éléments d'habillage. Elle contient les méthodes d'essai et d'évaluation ainsi que les dispositions relatives à l'évaluation de la conformité et au marquage des produits aux exigences de la présente Norme européenne.
Suspended ceilings - Requirements and test methods
- ICS
- 91.060.30
- CCS
- P32
- 发布
- 2014-06-28
- 实施
- 2014-06-28
This European Standard constitutes a frame standard for the design of timber stairs as well as wood and wood-based components used in stairs by calculation methods. Some calculation methods can be derived from testing results, for example CEN/TS 15680. This document specifies the design and the requirements for materials and components to be used in these calculation methods. It may be complemented by national application documents based on this European Standard. This European Standard applies to coated and uncoated components. This document covers load-bearing components such as strings, treads, risers, posts and guardrails. Requirements for a timber stair are defined in the product standard, EN 15644. This document does not cover stairs that contribute to the overall stability of the works or the strength of the structure. This European Standard is valid for the verification of mechanical performance characteristics, usability and load-bearing capacity and their related durability. Other requirements, e. g. requirements for acoustic properties, are not covered by this European Standard. For the design, calculation and determination of not solely resting actions, additional requirements need to be taken into account (to be checked). For the dimensioning with special reference to resistance to fire and earthquake/seismic action, additional requirements may be taken into account. Without further verification, the methods in this European Standard are valid for different types of stair structures and their components, as illustrated in Figure 1: a) Stair with closed string and riser b) Stair with closed string without riser c) Stair with cut strings and riser d) Stair with cut strings without riser e) Combination of stairs with closed string and cut string with or without riser Figure 1 - Types of stair structures and their components.
Timber stairs - Structural design - Calculation methods
- ICS
- 91.060.30
- CCS
- Q71
- 发布
- 2014-06
- 实施
Straw TATAMIDOKO and straw sandwich TATAMIDOKO
- ICS
- 91.060.30
- CCS
- Y81
- 发布
- 2014-04-21
- 实施
Suspended ceilings. Requirements and test methods
- ICS
- 91.060.30
- CCS
- P32
- 发布
- 2014-03-31
- 实施
- 2014-03-31
This European Standard covers membranes, individual substructure components, substructure kits and suspended ceiling kits intended to be placed on the market. It covers suspended ceilings sold as a complete kit, substructures placed on the market as kits, individual components (products) of such substructures, and membrane components. It includes test methods and methods of assessment, as well as provisions for the evaluation of conformity and for the marking of the products to the requirements of this European Standard. In the absence of any other European Standard, this European Standard specifies dimensions, tolerances and, where relevant, performance requirements, for commonly available ceiling substructures and membrane components. This European Standard covers the following characteristics: reaction to fire; fire resistance (suspended ceiling kits only); release and/or content of dangerous substances: release of asbestos (content) (suspended ceiling kits and membrane components only); release of formaldehyde (suspended ceiling kits and membrane components only); other dangerous substances; shatter properties (safe breakage)/impact resistance (for suspended ceiling kits and membrane components of brittle materials in suspended ceiling kits only); flexural tensile strength; load bearing capacity, tolerances and dimensions; electrical safety (as adequacy of the product to avoid electrocution from installations that may be part of the assembled ceiling, using electricity, such as ventilation devices and lighting); direct airborne sound insulation (suspended ceiling kits only); sound absorption (suspended ceiling kits and membrane components only); thermal conductivity (suspended ceiling kits and membrane components only); susceptibility to the growth of harmful micro-organisms; resistance to fixings (relevant for components that are mechanically fixed); durability of flexural tensile strength and load bearing capacity against moisture.
Suspended ceilings - Requirements and test methods
- ICS
- 91.060.30
- CCS
- Q18
- 发布
- 2014-03
- 实施
