91.060.30 天花板、地板、楼梯 标准查询与下载

ASTM E1111/E1111M-14 测量敞式办公部件区间衰减的标准试验方法

5.1 Providing speech privacy in open-plan spaces depends upon many factors, the most significant of which are the following: (1) the shadow zone of part-height space dividers and the diffraction of sound from the edges of space dividers; (2) the primary sound reflective properties of the ceiling system; (3) the level of masking sound present in the space; and (4) the distance between speaker and listener. Guide E1374 provides additional detail on the factors contributing to speech privacy in open-plan spaces. 5.2 In this test method the third factor, masking sound, is eliminated and the fourth factor, the distance between speaker and listener, is standardized for all specimen types. For the measurement of ceiling systems, the first factor, the shadow zone, is also standardized for each divider height used. Experience has indicated that results obtained by this test method may not fairly represent the speech privacy that may be achievable with non-flat ceiling systems. For the measurement of furniture panels used as acoustical barriers, the second of these factors, the sound reflectance of the ceiling, is standardized. For the measurement of reflective and absorptive vertical surfaces used as wall finishings or furniture panels, the first and second factors are standardized and all paths between the speaker and listener reflecting only off of the ceiling are eliminated. 5.3 This test method provides standardized techniques to assess the contribution of specific components of an open-plan space. The test method specifies an acoustical testing environment for each component type that isolates its contribution from the contribution of other components, which may in actual open-plan environments contribute significantly to the overall speech privacy. 5.4 The significance of test results obtained by this test method must also be considered with regard to the attainable measurement accuracy. The attainment of speech privacy in the presence of masking sound is critically dependent upon sound level of the speech relative to the masking sound; a change as small as 2 dB in either the speech or masking sound may change the privacy from significant to insignificant. The normally accepted test accuracies for sound attenuation measurements may be inadequate to evaluate components having marginal interzone attenuation performance for open-office needs. 1.1 This test method covers the measurement of the interzone attenuation for three components of open-plan spaces: 1.1.1 Ceiling systems when used in conjunction with partial-height space dividers. This arrangement is commonly used in offices to achieve speech privacy between work zones in the absence of full-height partitions. This test method is applicable to any ceiling configuration, including, for example, a pattern of sound-reflective panels in an otherwise sound-absorptive ceiling. This test method generally requires use of a fixed space divider height of 1.50 m [5 ft]. In recognition of trends toward alternate divider heights......

Standard Test Method for Measuring the Interzone Attenuation of Open Office Components

ASTM F2169-14 弹性楼梯踏板的标准规格

1.1 This specification covers resilient treads made of rubber and vinyl for interior use. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.

Standard Specification for Resilient Stair Treads

ASTM E1264-14 吸音顶棚产品的标准分类

4.1 This classification is used to classify and aid in the selection of acoustical ceiling products. 1.1 This classification covers ceiling products that provide acoustical performance and interior finish in buildings. Products used in performance spaces and other special applications may require more detailed specification than provided by this classification. 1.2 This classification classifies acoustical ceilings by type, pattern, and certain ratings for acoustical performance, light reflectance, and fire safety. It does not cover the aspects of acoustical ceilings when used as a component of a system or assembly tested for fire endurance or floor/ceiling sound transmission. 1.3 This classification does not include physical properties, such as structural hardness, friability, sag, linear expansion and contraction, and transverse strength, which may affect the handling, installation, and use of acoustical ceiling products (see Test Methods C367). 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

Standard Classification for Acoustical Ceiling Products

KS F 4760-2013 双重地板材

이 표준은 사무실이나 전산실 등에 사용하는 이중 바닥재의 시험방법에 대하여 규정한다.

Raised access floor

JG/T 413-2013 建筑用集成吊顶

本标准规定了建筑用集成吊顶(以下简称集成吊顶)的术语和定义、分类和标记、一般要求、要求、试验方法、检验规则、标志、包装、运输和贮存。本标准适用于民用建筑室内装饰装修用多功能吊顶。

Integrated ceiling for building

DB44/T 1110-2013 实木拼接板

本标准规定了实木拼接板的定义、技术要求、检验方法、检验规则及标识、包装、贮存和运输等要求。 本标准适用于实木拼接板生产经营和管理。

solid wood splice board

JIS A 5914:2013 非稻草的塌塌咪

Non straw TATAMIDOKO

JG/T 405-2013 住宅内用成品楼梯

本标准规定了住宅内用成品楼梯(简称楼梯)的术语和定义、分类和标记、材料、一般规定、要求、试验方法、检验规则以及标志、包装、运输、贮存和随行文件。本标准适用于主要受力构件为木质、金属以及金属——木质组合材料的住宅内用成品楼梯。

Stair for upholstery of domicile

SB/T 10951-2012 户外木地板耐久性试验方法

本标准规定了户外木地板耐久性的试验方法。本标准适用于不与地面接触的户外木地板耐久性测试。

Field test for durability performance of wood decking

GOST R 55908-2013 地板. 覆盖滑溜的评估方法

Floors. Method of the covering slipperiness evaluation

ANSI/ASHRAE 138-2013 评定顶棚嵌板感应供暖和冷却的试验方法

Method of Testing for Rating Ceiling Panels for Sensible Heating and Cooling

JC/T 430-2012 膨胀珍珠岩装饰吸声板

本标准规定了膨胀珍珠岩装饰吸声板的术语和定义、分类和标记、技术要求、试验方法、检验规则以及标志、包装、运输和贮存等。 本标准适用于以膨胀珍珠岩（体积密度≤80kg/m³）为骨科，加入无机胶凝材料及外加剂而制成的板，主要用于室内的装饰、消声和降噪。

Expanded perlite decorating and acoustic ceilings

DIN EN 16481:2012 木质楼梯.计算方法.德文版本prEN 16481-2012

Timber stairs - Structural design - Calculation methods; German version prEN 16481:2012

DIN 18560-4:2012 地板找平层.第4部分:分离层上的找平层

Floor screeds - Part 4: Screeds laid on separated layer

DIN 18560-2 Berichtigung 1:2012 房屋建筑物中的地面找平层.第2部分:绝缘层上的地板找平层和采暖地板找平层.DIN 18560-2-2009-09的勘误表

Floor screeds in building construction - Part 2: Floor screeds and heating floor screeds on insulation layers, Corrigendum to DIN 18560-2:2009-09

WB/T 1050-2012 木地板铺设辅料

本标准规定了木地板铺设所需辅料的质量要求和质量检测方法。 本标准适用于木地板辅料新品研发，本标准不适用于功能地板的辅料。

Supplementary materials of wooden flooring laying

WB/T 1049-2012 阻燃木质地板

本标准规定了阻燃木质地板的定义、分类、要求、试验方法、检验规则、标志、包装、运输和贮存等内容。 本标准适用于阻燃的实木地板、实木复合地板、浸渍纸层压木质地板、实木集成地板及竹地板等。

Fire-retardant wooden flooring

JG/T 342-2012 建筑用玻璃与金属护栏

本标准规定了建筑用玻璃与金属护栏的术语和定义、分类和标记、材料、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于由金属栏杆和金属或玻璃材料栏板所组成的民用建筑防护用护栏。 本标准不适用于非金属栏杆结构的护栏。

Glass and metal guardrail for building

ANSI/ASSE A1264.2-2012 行走/工作表面的耐滑性规则

Standard for the Provision of Slip Resistance on Walking/Working Surfaces

ABNT NBR 14917-2-2011 弹性地板地板 - 敏达（卷）或钢板（统治者）同质或异质乙烯柔性PVC第2部分：选拔，使用，安装，维护和清洁程序

This part of ABNT NBR 14917 establishes the general procedures for the preparation of the existing base systems, installation, reception services, maintenance and cleaning of floor coatings using components made of PVC (polyvinyl chloride)), may be submitted in form of tiles (plates) or rolls (blankets), flexible, homogeneous (HO) or layered heterogeneous (HT) and may contain fillers.

Resilient flooring flooring - minda (roll) or steel sheet (ruler) homogeneous or heterogeneous vinyl flexible PVC Part 2: Selection, use, installation, maintenance and cleaning procedures