91.060.50 门窗 标准查询与下载

DB37/T 5016-2021 民用建筑外窗工程技术标准

本标准适用于山东省行政区内新建、改建和扩建的民用建筑外窗工程。

Engineering technical standards for exterior windows of civil buildings

DB37/T 5001-2021 住宅外窗工程水密性现场检测技术规程

本规程适用于新建、扩建、改建住宅外窗工程质量验收前的水密性现场检测。

Technical specification for on-site testing of watertightness of residential exterior windows

ASTM E1423-21 确定开窗系统稳态热透射率的标准实践

1.1 This practice covers standard test specimen sizes and test conditions as well as the calculation and presentation of the thermal transmittance and conductance data measured in accordance with Test Method C1199. The standard sizes and conditions are to be used for fenestration product comparison purposes. The specifier may choose other sizes and conditions for product development or research purposes. 1.2 This practice deals with the determination of the thermal properties of a fenestration system installed vertically without the influences of solar heat gain and air leakage effects. NOTE 1—To determine air leakage effects of fenestration systems, Test Method E283/E283M or E1424 should be referenced. NOTE 2—See Appendix X1 regarding garage doors and rolling doors. 1.3 This practice specifies the procedure for determining the standardized thermal transmittance of a fenestration test specimen using specified values of the room-side and weather-side surface heat transfer coefficients, hh and hc, respectively. 1.4 The values stated in SI units are to be regarded as standard. The values given in parentheses after SI units are provided for information only and are not considered standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Determining Steady State Thermal Transmittance of Fenestration Systems

T/SZS 4036-2021 建筑用定制门

本文件规定了建筑用定制门的术语和定义、产品分类与代号、技术要求、试验方法、检验规则、标志、包装、运输及贮存。 本文件适用于民用建筑，并满足用户特定需求的定制门。不包括商业场所的电控自动门、安装电控系统的楼宇对讲门、室内门、特种门类、生产和物流场所使用的定制门等。

Customize doors for construction

T/CCMSA 10822-2021 紧急疏散平滑门

本文件规定了紧急疏散平滑门的术语和定义、分类、规格与标记、要求、试验方法、检验规则、包装、运输和贮存。 本文件适用于民用建筑具有紧急疏散功能的平滑自动门。

Break-out automatic sliding door

OENORM B 5312-2021 木窗和木铝窗施工规范

Wooden windows and wooden-aluminium windows - Construction Rules

T/CCMSA 10618-2021 公共建筑用平开门

本标准规定了一般公共建筑用平开门的术语和定义、分类、规格与标记、要求、试验方法、检验规则，以及包装、标志、运输和贮存。 本标准适用于一般公共建筑供人通行的平开门。 本标准不适用于有防火、防盗等特殊功能要求以及庭院用平开门。

Swing door for public buildings

UNI EN 1628-2021 行人门、窗、幕墙、格栅和百叶窗 防盗 静态负载下阻力测定的试验方法

Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Test method for the determination of resistance under static loading

GSO BS 4873:2021 铝合金门窗规格

This British Standard specifies requirements for the design, construction and performance of aluminium alloy windows and external pedestrian doorsets, thermally or non-thermally improved, including constituent materials and glazing. This British Standard does not apply to composite doorsets as defined in BS 8529, but it does cover doorsets that are predominantly aluminium framed (stile and rail construction) with replaceable composite panels. This British Standard applies to windows and doorsets fabricated in a factory, to be installed vertically (±15°) into the external face of buildings, as single or multi-light units, or in coupled assemblies where appropriate, of the following types: a) windows: 1) hinged: side-hung, top-hung, bottom-hung, tilt before turn or turn before tilt; 2) projecting: side-hung and top-hung (including reversible windows); 3) pivoted: horizontal and vertical; 4) sliding: horizontal and vertical (including tilting-in sash to vertical); 5) fixed lights; 6) fixed casement; 7) parallel opening; 8) double opening French casement; 9) louvred, adjustable; b) doorsets: 1) single leaf, single-swing or double-swing hinged or pivoted doors with or without side lights and top lights; 2) double leaf, single-swing or double-swing hinged or pivoted doors with or without side lights and top lights; 3) sliding doors (includes tilt and slide and lift and slide doors); 4) sliding folding doors. This British Standard is applicable to windows in which a casement or sash frame member is no longer than 3 m and in which a door leaf frame member is no longer than 3.5 m. This British Standard does not apply to curtain walls that span across horizontal structural members of floors, but it is applicable to windows or doorsets fitted within a curtain walling system. This British Standard is not applicable to secondary windows applied to convert existing single windows into double or coupled windows. NOTE Guidance on the evaluation of conformity is given in Annex A. Guidance on durability and recycling is given in Annex B.

Aluminium alloy windows and doorsets specification

UNI EN 1627-2021 行人门、窗、幕墙、格栅和百叶窗 防盗 要求和分类

Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Requirements and classification

GSO EN 14351-2:2021 门窗产品标准、性能特征 第2部分：内部行人门

This European Standard identifies material independent performance characteristics, except resistance to fire and smoke control characteristics, which are applicable to internal pedestrian doorsets. Fire resisting and/or smoke control characteristics for pedestrian doorsets and openable windows are covered by EN 16034. This European Standard applies to doorsets intended to be used internally for construction works as: - intended use a) in escape routes; - intended use b) for specific uses with specific requirements; - intended use c) for communication only. NOTE 1 These above intended uses can be combined, for example escape routes with specific requirements. For internal pedestrian doorsets with resistance to fire and /or smoke control characteristics, this standard should only apply in conjunction with EN 16034. Products covered by this European Standard are power operated hinged or manually operated internal pedestrian doorsets and screens with flush or panelled leaves, single or double leaf, which could be completed with: - related building hardware; - door closing devices; - integral fanlights; - adjacent parts that are contained within a single frame for inclusion in a single aperture. NOTE 2 Manually operated doors with door closing devices are not considered to be power operated doors. Products covered by this European Standard are not assessed for structural applications. This European Standard does not apply to: - industrial, commercial and garage doors and gates according to EN 13241; - external pedestrian doorsets according to EN 14351-1; - door leaves placed on the market as a single unit; - door frames placed on the market as a single unit; - power operated pedestrian doorsets, other than swing type, according to EN 16361. Doorsets can be placed on the market with their component (leaf and frame) separate when each of these components are clearly identified. This European Standard does not deal with any specific requirements on noise emitted from internal power operated hinged doorsets as their noise emission is not considered to be a relevant hazard.

Windows and doors - Product standard, performance characteristics - Part 2: Internal pedestrian doorsets

UNI EN 17372-2021 具有自闭功能的电动人行摆动门驱动器 要求和测试方法

Power operated pedestrian swing door drives with self closing function - Requirements and test methods

EC 1-2021 UNI 11673-4-2021 门窗安装 第4部分：安装要求和验证标准

Installation of doors and windows - Part 4: Requirements and verification criteria of installation

UNI EN 17020-4-2021 门组和开窗自闭耐久性试验结果的扩展应用 第4部分：铰链和/或旋转金属框玻璃门组和开窗的耐火和/或防烟自闭耐久性

Extended application of test results on durability of self-closing for doorsets and openable windows - Part 4: Durability of self-closing of fire resistance and/or smoke control hinged and pivoted metal framed glazed doorsets and openable windows

LST EN 17372-2021 具有自闭功能的电动人行摆动门驱动器 要求和测试方法

Power operated pedestrian swing door drives with self closing function - Requirements and test methods

LST EN 14501-2021 百叶窗和百叶窗 热和视觉舒适度 性能特征和分类

Blinds and shutters - Thermal and visual comfort - Performance characteristics and classification

LST EN 14500-2021 百叶窗和百叶窗 热和视觉舒适度 测试和计算方法

Blinds and shutters - Thermal and visual comfort - Test and calculation methods

T/ZZB 2128-2021 数字道闸驱动总成

本文件规定了数字道闸驱动总成的术语和定义、基本要求、使用环境、技术要求、试验方法、检验规则、标志、包装、运输、贮存和质量承诺。 本文件适用于收费公路、智能停车场等车辆出入口电动栏杆机用的数字道闸驱动总成（以下简称“总成”），本文件不适用于闸杆为双臂杆或栅栏杆的数字道闸驱动总成。

Drive assembly for digital barrier gate

UNI EN 14501-2021 百叶窗和百叶窗 热和视觉舒适度 性能特征和分类

Blinds and shutters - Thermal and visual comfort - Performance characteristics and classification

UNI EN 14500-2021 百叶窗和百叶窗 热和视觉舒适度 测试和计算方法

Blinds and shutters - Thermal and visual comfort - Test and calculation methods