91.080.20 木结构 标准查询与下载

NS 3470-1-1999/A1-2008 修改件A1.木结构设计规则.第1部分:通用规则

Amendment A1 Timber structures Design rules Part 1:Common rules

DS/SBC 14250:2008 桁架椽等认证的具体规则

The Specific Rules for Certification of trussed rafters etc are used at certification of prefabricated structural members (e,g trussed rafters, beams and girders) for use in buildings and bridges made from members of structural timber assembled with punched metal plate fasteners, cf. item 1 in DS/EN 14250.. Cf. the reading guidance these rules are valid only in connection with the Common Rules for certification of Products.

Specific Rules for Certification of trussed rafters etc

ANSI/TPI 1-2007 连接木框架结构的金属板的国家设计标准

This standard establishes minimum requirements for the design and construction of metal plate connected wood trusses and describes the materials used in a truss, both lumber and steel, and design procedures for truss members and joints. Responsibilities, methods for evaluating the metal connector plates, and manufacturing quality assurance are also contained in this standard. See the 3rd Public Review form available at www.tpinst.org/my TPI1PC.htm for specific sections being reviewed.

National Design Standard for Metal Plate Connected Wood

ANSI/AF&PA SDPWS-2008 风和地震用特殊设计设备

Provide special design and construction requirements for wind and seismic design of wood-frame structures.

Special Design Provisions for Wind and Seismic

DS/EN 14358:2007 木结构 样本的 5 个百分位特征值和验收标准的计算

This document specifies a method for the determination of characteristic 5-percentile values from test results for fasteners and wood-based products.This document also gives corresponding acceptance criteria for a sample.Structural timber is not covered by this document but by EN 384.Sampling is not covered by this document, but reference is made to the relevant product standards.

Timber structures - Calculation of characteristic 5-percentile values and acceptance criteria for a sample

DS/EN 383:2007 木结构 试验方法 销钉型紧固件的嵌入强度和基础值的测定

This standard specifies laboratory methods to determine the embedding strength and foundation values of solid timber, glued laminated timber and wood based sheet products with dowel type fasteners.

Timber Structures - Test methods - Determination of embedment strength and foundation values for dowel type fasteners

DIN EN 383:2007 木结构.试验方法.测定榫型紧固件的嵌入强度和基础参数

This standard specifies laboratory methods to determine the embedding strength and foundation values of solid timber, glued laminated timber and wood based sheet products with dowel type fasteners.

Timber Structures - Test methods - Determination of embedment strength and foundation values for dowel type fasteners; English version of DIN EN 383:2007-03

BS EN 383:2007 木结构.试验方法.测定榫型紧固件的嵌入强度和基值

This standard specifies laboratory methods to determine the embedding strength and foundation values of solid timber, glued laminated timber and wood based sheet products with dowel type fasteners.

Timber structures - Test methods - Determination of embedment strength and foundation values for dowel type fasteners

LST EN 383-2007 木结构 试验方法 销钉型紧固件的嵌入强度和基础值的测定

Timber Structures - Test methods - Determination of embedment strength and foundation values for dowel type fasteners

EN 383:2007 木结构的试验方法.测定榫型紧固件的嵌入强度和基值

This standard specifies laboratory methods to determine the embedding strength and foundation values of solid timber, glued laminated timber and wood based sheet products with dowel type fasteners.

Timber Structures - Test methods - Determination of embedment strength and foundation values for dowel type fasteners

AS 1684.2:2006 木结构住宅建设.非飓风区域

Specifies requirements for building practice and for the selection, placement and fixing of the various structural elements used in the construction of timber-framed Class 1 and Class 10 buildings, as defined in the Building Code of Australia, for non-cy

Residential timber-framed construction - Non-cyclonic areas (SEE IMPORTANT NOTE)

AS 1720.2:2006 木结构.木材特性

Provides a list of structural timbers and their properties, and an extensive explanation of the list.

Timber structures - Timber properties

DS/EN 12512/A1:2005 木结构 试验方法 机械紧固件接头的循环试验

This standard specifies a test method for determining the ductility, impairment of strength and energy dissipation properties of joints made with mechanical fasteners under cyclic loading.

Timber Structures - Test methods - Cyclic testing of joints made with mechanical fasteners

KS F 2153-2005(2015) 用于机械木材接头的侧向负载电阻测试方法

Testing method for lateral load resistance of mechanical timber joints

KS F 2153-2005 木材结构接合处侧面抗力测定方法

이 규격은 목구조에 사용되는 철물(못, 볼트 및 래그 나사못) 접합부의 전단 시험 방법에

Testing method for lateral load resistance of mechanical timber joints

NF P21-387:2005 木制结构.装配有穿孔金属板紧固件的预制结构构件的生产要求

Timber structures - Product requirements for prefabricated structural members assembled with punched metal plate fasteners.

BS EN 14250:2004 木结构.装配穿孔金属板紧固件的预制结构组件的生产要求

This document specifies product requirements for prefabricated structural members (e.g. trusses, beams and girders) for use in buildings and bridges made from members of structural timber (with or without finger joints) assembled with punched metal plate fasteners. The standard also covers methods to carry out the evaluation of conformity and the marking.

Timber structures - Product requirements for prefabricated structural members assembled with punched metal plate fasteners

BS EN 14250:2005 木结构.装配穿孔金属板紧固件的预制结构组件的生产要求

Timber structures - Product requirements for prefabricated structural members assembled with punched metal plate fasteners

GOST 27812-2005 胶合木材.层间粘接的试验方法

Glued laminated timber. Test methods for glue lines delamination strength

KS F ISO 9087-2004(2014) 钉的测定和螺丝下木材轴向载荷应用保持力

Determination of nail and screw holding power under axial load application for wood