91.080.20 木结构 标准查询与下载

DIN EN 1383:2000 木结构.试验方法.木制紧固件的楔入阻力

Timber structures - Test methods - Pull through resistance of timber fasteners; German version EN 1383:1999

DIN EN 1381:2000 木结构.试验方法.承重的钩环接合.德文版本EN1381:1999

This document specifies test methods for determining the strength and deformation characteristics of joints in load-bearing timber structures. The methods assess joints with members of timber (solid timber and glued laminated timber) or wood-based products in the combination proposed for use in service and using all types of staples up to 3 mm diameter for circular cross-section staples or 4 mm * 2 mm for rectangular or oval cross-section staples.

Timber structures - Test methods - Load bearing stapled joints; German version EN 1381:1999

DIN EN 1382:2000 木结构.试验方法.木制紧固件的抗拔出力.德文版本EN1382-1999

This document specifies the test method for determining the withdrawal capacity of fasteners which have been inserted into timber (solid timber and glued laminated timber). The test method applies to all types of nails, screws and staples.#,,#

Timber structures - Test methods - Withdrawel capacity of timber fasteners; German version EN 1382:1999

BS EN 1383:1999 木结构.试验方法.木结构紧固件的抗拉穿性能

This standard specifies the test method for determining the resistance of timber to the head pull through of timber fasteners. In this standard "timber" includes solid timber, glued laminated timber- and wood-based products. The test method applies to all types of nails, screws and staples.

Timber structures - Test methods - Pull-through resistance of timber fasteners

BS EN 1382:1999 木结构.试验方法.木结构紧固件的拆卸能力

This standard specifies the test method for determining the withdrawal capacity of fasteners which have been inserted into timber (solid timber and glued laminated timber). The test method applies to all types of nails, screws and staples.

Timber structures - Test methods - Withdrawal capacity of timber fasteners

BS EN 1381:1999 木结构.试验方法.承载的U型钉连接部位

This standard specifies test methods for determining the strength and deformation characteristics of stapled joints in load-bearing timber structures. The methods assess joints with members of timber- (solid timber and glued laminated timber) or wood-based products in the combination proposed for use in service and using all types of staples up to 3 mm diameter for circular cross-section staples or 4 mm ×2 mm for rectangular or oval cross-section staples. The methods determine load-slip characteristics and maximum load of joints with laterally loaded staples where various angles between the applied force and the timber grain direction or the main direction of the wood-based products, respectively, are possible.

Timber structures - Test methods - Load bearing stapled joints

BS EN 1380:1999 木结构.试验方法.承载的钉固定连接部位

This standard specifies test methods for determining the strength and deformation characteristics of laterally loaded nailed joints in load-bearing timber structures. The methods assess joints with members of timber-(solid timber or glued laminated timber) or wood-based products or metal plates (but not punched metal plate fasteners) in the combination proposed for use in service using all types of nails. The methods are used to determine load-slip characteristics and maximum load of joints where various angles between the applied force and the timber grain direction, or the main direction of the wood-based products, respectively, are possible. The methods can be used with joints made with other dowel type fasteners. In this event, certain details of the test may need to be changed. NOTE The dowel type fasteners considered are screws, bolts and dowels. For these types of fasteners, tests using other load grain angles than specified in this EN may be necessary.

Timber structures - Test methods - Load bearing nailed joints

NF P21-376:1999 木材构件.试验方法.负载承重肘钉连接件

Timber structures - Test methods - Load bearing stapled joints.

NF P21-378:1999 木结构.试验方法.木制紧固件的拉过抗性

Timber structures - Test methods - Pull through resistance of timber fasteners.

NF P21-312:1999 木结构件.试验方法.用穿孔金属板紧固件进行组装

Timber structures - Test methods - Joints made with punched metal plate fasteners.

NF P21-377:1999 木质结构.试验方法.木制紧固件的耐拆卸性能

Timber structures - Test methods - Withdrawal capacity of timber fasteners.

EN 1075:1999 木材结构的试验方法.用冲击金属板紧固件制造的连接件

This European Standard specifies the text methods for determiningThe strength capacity and stiffness of joints made with punched metal plate fasteners in load bearing timber structures, being used to joint two or more pieces of the same plane.

Timber Structures - Test Methods - Joints Made with Punched Metal Plate Fasteners

ISO 10983:1999 木结构 实心木材指型接头 生产要求

This International Standard specifies requirements for bonded finger joints and minimum requirements for the manufacture of cut, interlocking, bonded finger joints in structural timber members. Although most finger joints are produced in coniferous species, this International Standard also applies to broad-leaved species where information is available to enable them to be satisfactorily bonded. It does not cover impressed (die-formed) joints. In the case of glued laminated timber it applies only to individual laminations. Large finger joints in glued laminated timber are not covered by this International Standard.

Timber structures - Solid timber finger-jointing - Production requirements

ASTM C1060-90(1997)e1 框架建筑物信封舱内绝缘装置的热成像检验标准实践

Standard Practice for Thermographic Inspection of Insulation Installations in Envelope Cavities of Frame Buildings

DIN EN 595:1996 木结构.试验方法.测定承重能力和变形特性用桁架梁试验

The document specifies the test procedures for determining the strength and deformation behaviour of trusses.

Timber structures - Test methods - Test of trusses for the determination of strength and deformation behaviour; German version EN 595:1995

DIN 68800-2:1996 木材防腐.第2部分:建筑物预防措施

Protection of timber - Part 2: Preventive constructional measures in buildings

DS/EN 596:1996 木结构 试验方法 木结构墙的软体冲击试验

This standard specifies a test method for determining the resistance of a timber frame wall panel to impact from a soft body allowed to strike the sheathing of the panel.

Timber structures - Test methods - Soft body impact test of timber framed walls

DS/EN 595:1996 木结构 试验方法 确定强度和变形性能的桁架试验

This Standard specifies the test procedures for determining the strength and deformation behaviour of trusses. The test methods are based on EN 380.

Timber structures - Test methods - Test of trusses for the determination of strength and deformation behaviour

NF P21-382:1996 木结构件.试验方法.结构墙板剥离强度和刚度的试验

Timber structures. Test methods. Racking strength and stiffness of timber frame wall panels.

STAS SR ISO 6891:1995 木材结构．机械紧固件接头．强度和变形特性测定的一般原则

Prezentul Standard Interna?ional stabile?te principiile generale pentru determinarea caracteristicilor de rezisten?? ?i de deformare (deplasare) ale ?mbin?rilor realizate cu elemente mecanice pentru fixare.

Timber structures. Joints made with mechanical fasteners. General principles for the determination of strength and deformation characteristics