91.080.20 木结构 标准查询与下载

GOST 25885-1983 胶合木结构.木质板材料中与木纤维粘接强度测定法

Glue laminated wood structures. Method of determination of the interlayer strength of the wood meterials with wood glue joints

GOST 25884-1983 胶合木结构.分层剪刀时粘接强度测定法

Glue laminated wood structures. Method of determination of the interlayer strength of the glue joints

ISO/DIS 24322 木结构《长期性能评价试验方法》第1部分：弯曲木制品

Timber structures — Methods of test for evaluation of long-term performance — Part 1: wood-based products in bending

ISO/CD 7567 Bamboo Structures 胶合竹材--产品规范

Bamboo Structures — Glued laminated bamboo --Product specification

ISO/DIS 24323 木结构 木地板振动适用性设计方法

Timber structures — Design method for vibrational serviceability of timber floors

ISO/CD TR 3446 Timber Structures 从小的白木样本试验中测定锯材的特征值

Timber Structures – Determination of characteristic values of sawn timber from tests on Small Clear Wood Specimens

ISO/DIS 5257 竹结构“工程竹制品”“使用小尺寸试样测定机械性能的试验方法”

Bamboo Structures – Engineered bamboo products – Test methods for determination of mechanical properties using small size specimens

GOST 17005-1982 胶合木结构.胶结处耐水性测定法

Настоящий стандарт распространяется на деревянные клееные конструкции из древесины хвойных пород и устанавливает метод определения вод

Wooden laminated structures. Methods to determinate water-stability of adhesive joints

GOST 17580-1982 木制层压结构.在循环温度和湿度影响下测定胶接稳定性的方法

Настоящий стандарт распространяется на деревянные клееные конструкции из древесины хвойных пород и устанавливает метод определения сто

Wooden laminated structures. Method to determinate stability of glued joints against cyclic temperature- and humidity influences

GOST 4.208-1979 质量评价系统.建设.木料胶合木层结构.特性术语

Настоящий стандарт распространяется наклееные деревянные конструкции и устанавливает номенклатуру показателей их качества для примене

Quality rating system. Building. Timber glulam structures. Nomenclature of characteristics

JIS A 5531:1978 木结构用配件

この規格は，木造建築物に使用する次の木構造用金物について規定する。

Fittings for wooden construction

GOST 22406-1977 建筑工程用木零件及制品.防湿涂层及浸渍后的吸湿性测定法

Timber elements and products for building. Method of determining conditional water permeability of water protecting finishes and impregnating compounds

CSA O86-1976 木材工程设计规范

Code for the Engineering Design of Wood

HB 108-1998 木材设计手册．根据澳大利亚国家木材设计规范AS 1720．1－1997

This Handbook provides comprehensive guidance on design of timber with reference to the methods given for limit states design in AS 1720.1-1997.Design of members is covered in detail with step by step instructions and worked examples. Also given is the b

Timber Design Handbook - In accordance with the Australian Limit State Timber Design Code, AS 1720.1-1997

AS 1720.1:1997 建筑木材 设计方法

Sets out the limit state design methods to be used in the design or appraisal of structural elements comprised of timber or wood products and of structures comprised substantially of timber. Design data is provided for sawn timber, glued laminated timber

Timber structures - Design methods

HB 44 Supp 3-1995 木结构法规导则．标准固定和紧固要求33m/s或41m/s铺瓦屋顶材料．紧固检查表第1版

Provides development and extension of the fixing and tie-down requirements in AS 1684-1992: National Timber Framing Code and the subsequent Amendments. It is one in a series of four check sheets: 28 m/s sheet roof, 28 m/s or 33 m/s tiled roof, 33 m/s she

A Guide to the Timber Framing Code - Standard fixing and tie-down requirements 33 m/s sheet or 41 m/s tiled roof material - Tie-down check sheet 1st edition

HB 44 Supp 2-1995 木结构法规导则．标准固定和紧固要求28m/s或33m/s铺瓦屋顶．紧固检查表第1版

Provides development and extension of the fixing and tie-down requirements in AS 1684-1992: National Timber Framing Code and the subsequent Amendments. It is one in a series of four check sheets: 28 m/s sheet roof, 28 m/s or 33 m/s tiled roof, 33 m/s she

A Guide to the Timber Framing Code - Standard fixing and tie-down requirements 28 m/s or 33 m/s tiled roof - Tie-down check sheet 1st edition

HB 44 Supp 1-1995 木结构法规导则．标准固定和紧固要求28m/s薄板屋顶．紧固检查表第1版

Provides development and extension of the fixing and tie-down requirements in AS 1684-1992: National Timber Framing Code and the subsequent Amendments. It is one in a series of four check sheets: 28 m/s sheet roof, 28 m/s or 33 m/s tiled roof, 33 m/s she

A Guide to the Timber Framing Code - Standard fixing and tie-down requirements 28 m/s sheet roof - Tie-down check sheet 1st edition

AS 1720.4:1990 建筑木材 木结构的耐火性能

Provides a computational method for determining the fire-resistance of solid and glued-laminated structural timber members as an alternative to furnace testing. Information is also provided on methods of protecting timber and metal connectors from the effects of fire.

Timber structures - Fire-resistance of structural timber members

BS EN 14592:2022 木结构.销钉状紧固件.要求

This European Standard specifies the requirements and test methods for materials, geometry, strength, stiffness and durability ascpects (i.e. corrosion protection) of dowel-type fasteners for use in load bearing timber structures. Only dowel-type fasteners manufactured from steel are covered by this European Standard. For the purpose of this standard, dowel-type fasteners for timber structures are taken to be nails, staples, screws, dowels, and bolts with nuts. Definitions of these items are given in Clause 3. This European Standard specifies also the evaluation of conformity procedures and includes requirements for marking of these products. This European Standard does not cover resin coated dowel-type fasteners and fasterners treated with fire retardants to improve their fire performance. It also does not cover resin coated fasteners.

Timber structures - Dowel-type fasteners - Requirements