91.100.40 纤维增强水泥制品 标准查询与下载

ISO 9383:1995/Cor 1:2005 纤维增强水泥制品.屋面用小波瓦或非对称截面瓦和配件.技术勘误1

This is Technical Corrigendum 1 to ISO 9383-1995 (Products in fibre-reinforced cement — Short corrugated or asymmetrical section sheets and fittings for roofing)

Products in fibre-reinforced cement - Short corrugated or asymmetrical section sheets and fittings for roofing; Technical Corrigendum 1

ISO 9933:1995/Cor 2:2005 纤维增强水泥制品.屋面和覆盖用大波瓦或非对称截面瓦和配件.技术勘误2

This is Technical Corrigendum 2 to ISO 9933-1995 (Products in fibre-reinforced cement — Long corrugated or asymmetrical section sheets and fittings for roofing and cladding )

Products in fibre-reinforced cement - Long corrugated or asymmetrical section sheets and fittings for roofing and cladding; Technical Corrigendum 2

SANS 803:2005 纤维水泥板

Specifies the requirements for smooth surface and textured surface fibre-cement boards.

Fibre-cement boards

ISO 9383:2005/Amd 1:2005 纤维增强水泥产品 短波纹或不对称截面板材和屋顶配件技术勘误 1

Products in fibre-reinforced cement — Short corrugated or asymmetrical section sheets and fittings for roofing TECHNICAL CORRIGENDUM 1

ISO 9125:1990/Cor 2:2005 纤维水泥平板.技术勘误2

This is Technical Corrigendum 2 to ISO 9125-2005 (Fibre-cement slates and fittings)

Fibre-cement slates and fittings; Technical Corrigendum 2

ISO 9384:1991/Cor 1:2005 纤维水泥背瓦.技术勘误1

This is Technical Corrigendum 1 to ISO 9384-1991 (Fibre-cement siding shingles)

Fibre-cement siding shingles; Technical Corrigendum 1

ISO 8336:1993/Cor 1:2005 纤维水泥平板.技术勘误1

This is Technical Corrigendum 1 to ISO 8336-1993 (Fibre-cement flat sheets)

Fibre-cement flat sheets; Technical Corrigendum 1

JC/T 952-2005 玻璃纤维增强水泥永久性管状芯模

本标准规定了玻璃纤维增强水泥永久性管状芯模的规格与标记、材料、技术要求、试验方法、检验规则、标志、堆放与运输。 本标准适用于以耐碱玻璃纤维为主要增强材料、快硬硫铝酸盐水泥、快硬铁铝酸盐水泥或低碱度硫铝酸盐水泥为胶凝材料、砂子为集料、也可加入粉煤灰等掺合料制成的两端封闭的玻璃纤维增强水泥永久性管状芯模。本标准适用于原璃纤维增强水泥圆形管状芯模，椭圆形、梯形等异型管状芯模可参照本标准使用。该产品作为非抽芯成孔的芯模用于现浇钢筋混凝土空心楼板、桥面板及其它空心构造中。

Glassfibre reinforced cement permanent tube-shaped core formwork

CNS 14890-2005 再生纤维水泥板

本标准适用于以下列原料，抄造成形后，经养护所制成再生之纤维水泥板(以下简称纤维板)。(1) 水泥。(2) 有机纤维、无机纤维等石绵以外之纤维及无机质混合材料等以及其废弃物(1)。注(1) 经相关主管机关公告一般事业废弃物并经核准再利用之物质。

Regenerated fiber cement boards

ASTM E2308-05 建筑物用有限石棉隔板的标准指南

1.1 The purpose of this guide is to (1) define good commercial and customary practice in the United States of America for conducting a baseline limited asbestos screen (hereinafter, LAS) to evaluate the presence of asbestos-containing materials (ACMs) in major building systems within the interior of buildings involved in commercial real estate transactions, including, but not limited to, acquisitions, sales, leasing and financing; (2) facilitate consistency in the industry as to the scope and reports associated with an LAS; ( 3) establish reasonable expectations and an industry baseline standard of care for an LAS; and (4) recommend protocols for providers in communicating observations, opinions and recommendations in a manner meaningful to the user.1.2 Other Purpose LimitationsWhile an LAS is intended to reduce the risk of the presence of ACM within a building, it is not designed to eliminate that risk. The LAS presented in this guide is not intended to serve as a comprehensive asbestos building survey, comprehensive inspection or comprehensive assessment for the presence of ACM in all or most of the building systems throughout a building, nor does an LAS serve to adequately assess the presence of ACM in a building or portions thereof for pre-demolition, pre-renovation or OSHA notification purposes. For such services, a comprehensive asbestos building survey should be performed that meets applicable state and local regulations. In light of the foregoing purposes, this guide primarily offers scope and insight into the limited nature of asbestos screens driven by the commercial real estate market. It is recognized, however, that the asbestos industry utilizes procedures for sample collection, friability evaluation and analyses based upon such rules and regulations as AHERA, OSHA, and various state regulations. This guides use of terms defined by such regulations (e.g., friability, damage assessment, suspect materials) in no way implies that the scope of this guide is designed to meet all other mandates of those regulations.1.3 Considerations Beyond This ScopeThe use of this guide is strictly limited to the scope set forth in this section. The scope of this guide does not include safety considerations, certification or licensure of inspectors other than requiring that work be performed in a safe manner and that inspectors be properly credentialed, as described in . The LAS set forth in this guide is not intended to eliminate the risk potential of ACM within the building, nor should it be interpreted as a comprehensive building asbestos survey, comprehensive inspection or comprehensive assessment for the presence of ACM in all or most of the building systems throughout a building, nor does this LAS serve to adequately assess the presence of ACM in a building or portions thereof for pre-demolition or pre-renovation purposes. Assessment of roofing materials and exterior materials (such as siding/stucco), conveying systems (such as escalators and elevators), energized systems (e.g., charged electrical systems, hydraulic and pneumatic pressure systems), or private single-family residences are specifically excluded from this guide. Such exclusions are addressed in comprehensive building asbestos surveys, or users may request the addition of the foregoing exclusions as Additional Services (see Section ). 1.4 Organization of the GuideThis guide has 12 sections. Section defines the Scope. Section is Referenced Documents. Section is Terminology. Section defines the Significance and Use of this guide. Section describes User Responsibilities. Section sets forth the components of an LAS under this guide. Section describes the Interview and Report Review process. Section describes the scope of the building walk-through. Section provide Analytical Guidelines. Section describes LAS report contents. Section identifies Non-Scope Considerations. Section lists keyword......

Standard Guide for Limited Asbestos Screens of Buildings

BS EN 492:2004 纤维水泥条板及配件.产品规格和试验方法

This document specifies the technical requirements and establishes methods of control and test as well as acceptance conditions for fibre-cement slates and their fibre-cement fittings for one or more of the following uses: - roofing, - internal wall finishes, - external wall and ceiling finishes. It applies to fibre-cement slates with a height dimension h (see Clause 4) not exceeding 850 mm for overlapping assembly. For the purpose of this standard, fibre-cement slates have been classified according to their bending moment. This document covers fibre-cement slates reinforced with fibres of different types as specified in 5.1.1. This standard does not include calculations with regard to works, design requirements, installation techniques, wind uplift or rain proofing of the installed products.

Fibre cement slates and fittings - Product specification and test methods

BS EN 12467:2004 纤维水泥平板材.产品规范和试验方法

This document specifies the technical requirements and establishes methods of inspection and test as well as acceptance conditions for fibre-cement flat sheets, siding shingles and planks (referred to as sheets later in this document) for one or more of the following uses: — internal wall and ceiling finishes, — external wall and ceiling finishes. Products covered by this document can be used for other purposes provided they comply with the relevant application standard, e.g. rigid underlays. NOTE prEN (Wl 128087) "Roof covering products for discontinuous laying and products for wall cladding - Rigid underlays - Rigid underlays for discontinuously laid roof coverings - Product specification and test methods" is under preparation. This document covers sheets reinforced with fibres of different types as specified in 5.1.1. This document does not cover sheets for fire protection purposes. This document does not include calculations with regard to works, design requirements, installation techniques, wind uplift or rain proofing of the installed sheets.

Fibre-cement flat sheets - Product specification and test methods

BS EN 494:2004 纤维水泥型板及配件.产品规范和试验方法

This document specifies the technical requirements and establishes methods of control and test as well as acceptance conditions for fibre-cement profiled sheets and their fibre-cement fittings for one or more of the following uses: ? roofing, ? internal wall finishes, ? external wall and ceiling finishes. For the purpose of this document fibre-cement profiled sheets are classified according to their height of corrugation and their mechanical characteristics. This document covers fibre-cement profiled sheets reinforced with fibres of different type as specified in 5.1.1, with and without factory applied coating. This document does not include calculations with regard to works, design requirements, installation techniques, wind uplift or rain proofing of the installed sheets. NOTE Some of these requirements can be applied to curved sheets, after agreement between manufacturer and purchaser.

Fibre-cement profiled sheets and fittings — Product specification and test methods

JC/T 940-2004 玻璃纤维增强水泥(GRC)装饰制品

本标准规定了玻璃纤维增强水泥(GRC) 装饰制品的分类、材料、技术要求、试验方法、检验规则以 及标志、堆放、装卸、运输与出厂。 本标准适用于以耐碱玻璃纤维为主要增强材料、快硬硫铝酸盐水泥或硅酸盐水泥为胶凝材料、 砂子 为集料制成的玻璃纤维增强水泥 (GRC) 装饰制品。 本标准不适用于以膨脹珍珠岩或膨脹星石等为集料制成的輕質玻璃纖維增強水泥裝飾制品，

Glassfibre reinforced cement finished products

JIS A 5430:2004 增强纤维水泥板

この規格は，石綿以外の繊維で強化成形したスレート(波板及びボード)，けい酸カルシウム板及びスラグせっこう板(以下,繊維強化セメント板という。)について規定する。

Fiber reinforced cement boards

ISO 8336:1993/Amd 1:2004 纤维水泥平板.修改件1

Fibre-cement flat sheets; Amendment 1

ISO 9384:1991/Amd 1:2004 纤维水泥墙板瓦.修改件1

Fibre-cement siding shingles — Amendment 1

ISO 9933:1995/Amd 1:2004 纤维增强水泥制品.屋面和覆盖用大波瓦或非对称截面瓦和配件.修改件1

This is Amendment 1 to ISO 9933-1995 (Products in fibre-reinforced cement — Long corrugated or asymmetrical section sheets and fittings for roofing and cladding —AMENDMENT 1 )

Products in fibre-reinforced cement - Long corrugated or asymmetrical section sheets and fittings for roofing and cladding; Amendment 1

ISO 9383:1995/Amd 1:2004 纤维增强水泥制品.屋面用小波瓦或非对称截面瓦和配件.修改件1

This is Amendment 1 to ISO 9383-1995 (Products in fibre-reinforced cement Short corrugated or asymmetrical section sheets and fittings for roofing )

Products in fibre-reinforced cement - Short corrugated or asymmetrical section sheets and fittings for roofing; Amendment 1

ISO 9125:1990/Amd 1:2004 纤维水泥板和配件.修改件1

This is Amendment 1 to ISO 9125-1990 (Fibre-cement slates and fittings)

Fibre-cement slates and fittings - Amendment 1