91.100.40 纤维增强水泥制品 标准查询与下载

JIS A 5430:2001 纤维增强水泥板

Fiber reinforced cement boards

ASTM C1225-00 无石棉纤维水泥屋顶瓦和石板的标准规范

1.1 This specification covers non-asbestos, fiber-cement shingles, shakes, and slates (roofing products) of nominally uniform thickness (non-tapered) and texture, including accessories designed to provide the weather-exposed surfaces on roofs of buildings. 1.2 This specification is not applicable to asbestos-cement roofing shingles (Specification C222), particle board (Definitions D1554), or cement-bonded particleboards (Specification BS 5669: Part 4) and (ISO 8335). 1.3 This specification does not include details of product installation, or installed system performance such as levels of fire resistance which is covered under Test Methods E108. 1.4 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses (SI units) are provided for information only.

Standard Specification for Non-Asbestos Fiber-Cement Roofing Shingles, Shakes, and Slates

SANS 9933:1995 纤维增强水泥制品．屋面和覆盖用大波瓦或非对称截面瓦和配件

Lays down the technical characteristics of straight fibre-cement profiled sheets, of more than 0,9 m in length, and their fibre-cement fittings used as roofing and cladding materials. Also specifies tests for checking these characteristics as well as mar

Products in fibre-reinforced cement - Long corrugated or asymmetrical section sheets and fittings for roofing and cladding

DS/EN 1169:2000 预制混凝土制品 玻璃纤维增强水泥工厂生产控制通则

This European Standard is applicable to glass-fibre reinforced cement products manufactured in factories. It defines the general rules for production control of GRC material. It constitutes the common ""production"" part of the control plan, for which guidelines are given in annex A. It does not specify: - the conformity control procedure for the finished products, for which reference should be made to the specification of European products Standards or, if none exist, to the technical requirements defined and agreed between the manufacturer and his customer; - the means and methods to be used to control the whole production process (moulds, curing, storage

Precast concrete products - General rules for factory production control of glass-fibre reinforced cement

ASTM C318/C318M-00(2010) 石膏预制板的标准规格

1.1 This specification covers the minimum requirements for gypsum formboard designed for use as a permanent form for poured-in-place reinforced gypsum concrete roof decks. 1.2 The values stated in either inch-pound units or SI (metric) are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system shall be used independent of the other. Values from the two systems shall not be combined. 1.3 The text of this standard references notes which provide explanatory material. These notes shall not be considered requirements of the standard.

Standard Specification for Gypsum Formboard

ASTM C296/C296M-00(2015) 石棉水泥压力管的标准规格

1.1 This specification covers asbestos-cement pressure pipe for use in supply lines and distribution systems that carry water under pressure. The specification also covers asbestos-cement pressure pipe for use in sewer force mains which carry sewage under pressure. 1.2 The text of this standard references notes and footnotes which provide explanatory material. Those notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard. 1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.4 Warning—Breathing of asbestos dust is hazardous. Asbestos and asbestos products present demonstrated health risks for users and for those with whom they come into contact. In addition to other precautions, when working with asbestos-cement products, minimize the dust that results. For information on the safe use of chrysotile asbestos, refer to “Safe Use of Chrysotile: A Manual on Preventive and Control Measures.”2 1.5 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Asbestos-Cement Pressure Pipe

KS F 3197-1999 石棉水泥壁板

ASBESTOS CEMENT SIDINGS

KS F 2230-1999(2014) 木丝水泥板的钢筋聚苯乙烯测试条件

General test conditions of polystyrene composite wood wool cement boards

KS F 2230-1999 聚苯乙烯固化合成刨花板基本测试条件

이 규격은 폴리스티렌 강화 목모 시멘트 판의 시험에 필요한 시료, 시험편의 준비, 시험 기

General test conditions of polystyrene composite wood wool cement boards

ASTM C1185-99 非石棉纤维水泥平板 屋顶和侧面木瓦和隔板采样和测试的标准测试方法

1.1 These test methods cover sampling and testing of non-asbestos fiber-cement flat sheets, roofing shingles, siding shingles, and clapboards. These products may be smooth or surface textured. These test methods are utilized in evaluating products cited in Specifications C1186, C1225, C1288, and C1325. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.3 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.

Standard Test Methods for Sampling and Testing Non-Asbestos Fiber-Cement Flat Sheet, Roofing and Siding Shingles, and Clapboards

KS F 2231-1999 聚苯乙烯固化合成刨花板尺寸及直角测量方法

이 규격은 폴리스티렌 강화 목모 시멘트판의 치수 및 직각도 측정 방법에 대해서 규정한다.

Measuring method for dimensions and squareness of polystyrene composite wood wool cement boards

KS F 2231-1999(2014) 尺寸和垂直于聚苯乙烯强化木丝水泥板也确定

Measuring method for dimensions and squareness of polystyrene composite wood wool cement boards

NF P33-301/A1:1999 修改件1

Modification 1

NF P33-302/A1:1999 修改件1

Modification 1

ISO 9933:1995/Cor 1:1999 纤维增强水泥制品 屋面和覆盖用大波瓦或非对称截面瓦和配件 技术勘误1

This standard is Products in fibre-reinforced cement - Long corrugated or asymmetrical section sheets and fittings for roofing and cladding; Technical corrigendum 1

Products in fibre-reinforced cement - Long corrugated or asymmetrical section sheets and fittings for roofing and cladding; Technical corrigendum 1

ASTM C1121-90(1999) Turner和Newall（T和N）石棉湿度分类的标准测试方法

Standard Test Method for Turner and Newall (T and N) Wet-Length Classification of Asbestos

ASTM C1288-99(2010) 单块非石棉纤维水泥内衬底薄板的标准规范

1.1 This specification covers discrete non-asbestos fiber-cement sheets manufactured to be dimensionally stable and suitable for decoration as paint, wallpaper, natural stone, tile, or resilient flooring in internal wet and dry areas. 1.2 This specification is not applicable to asbestos-cement flat sheets (Specification C220), non-asbestos fiber cement flat sheets for exterior applications such as claddings, facades, curtain walls, and soffits (Specification C1186), gypsum backing board and coreboard (Specification C442/C442M), water-resistant gypsum backing board (Specification C630/C630M), glass mat gypsum backing board (Specification C1178/C1178M), particle boards (Definitions D1554), fiber mat cement boards (Specification C1325 and ANSI A118.9), or cement-bonded particleboards (Specification BS 5669: Part 4) and (ISO 8335). 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

Standard Specification for Discrete Non-Asbestos Fiber-Cement Interior Substrate Sheets

DS/EN 1170-2:1998 预制混凝土产品 玻璃纤维增强水泥的试验方法 第2部分：新鲜 GRC 中纤维含量的测量，“洗出试验”

This European Standard specifies a test method for verifying the fibre content and the uniformity of distribution in the finished products and for monitoring the consumption of fibres.

Precast concrete products - Test method for glass-fibre reinforced cement - Part 2: Measuring the fibre content in fresh GRC, ""Wash out test""

DS/EN 1170-3:1998 预制混凝土制品玻璃纤维增强水泥试验方法第3部分：喷涂GRC纤维含量的测量

This European Standard specifies a test method for verifying, during production, the fibre content of sprayed glassfibre reinforced cement.

Precast concrete products - Test method for glass-fibre reinforced cement - Part 3: Measuring the fibre content of sprayed GRC

DS/EN 1170-1:1998 预制混凝土制品 玻璃纤维增强水泥的试验方法 第1部分：测量基体“坍落度试验”方法的稠度

This European Standard specifies a method of test making it possible to check the workability of the mixture and the conformity of the water/cement ratio (suitability for pumping and compaction) in glassfibre reinforced cement.

Precast concrete products - Test method for glass-fibre reinforced cement - Part 1: Measuring the consistency of the matrix ""Slump test"" method