91.100.40 纤维增强水泥制品 标准查询与下载

ISO 9383:1995 纤维增强水泥制品 屋面用小波瓦或非对称截面瓦和配件

Specifies the technical characteristics of fibre-cement profiled sheets, described as short sheets, the length of which is normally less than or equal to 0,7 m and the corrugation height of which is between 15 mm and 110 mm and also of fibre-cement fittings, used as roofing materials. Specifies tests to check them, conditions of acceptance and marking. Does not apply to short asbestos-cement corrugated and asymmetrical section sheets, nor to long fibre-cement sheets.

Products in fibre-reinforced cement - Short corrugated or asymmetrical section sheets and fittings for roofing

ISO 9933:1995 纤维增强水泥制品 屋面和覆盖用大波瓦或非对称截面瓦和配件

Lays down the technical characteristics of straight fibre-cement profiled sheets, of more than 0,9 m length, and their fibre-cement fittings used as roofing and cladding materials. Also specifies tests for checking these characteristics as well as marking and conditions of acceptance. Does not apply to asbestos-cement corrugated or profiled sheets, nor to short fibre-cement sheets.

Products in fibre-reinforced cement - Long corrugated or asymmetrical section sheets and fittings for roofing and cladding

JIS A 5430:1995 增强纤维水泥板

Fiber reinforced cement boards

GOST 18124-1995 石棉水泥平板.技术条件

Настоящий стандарт распространяется на асбестоцементные плоские листы, предназначенные для изготовления и облицовки строительных конст

Asbestos cement flat sheets. Specifications

GOST 30301-1995 石棉水泥制品.验收规则

Ascbestos-cement products. Acceptance rules

GOST 30340-1995 石棉瓦楞板.技术条件

Asbestos-cement corrugated sheets. Specifications

JIS A 7802:1994 石棉水泥烟囱的安装标准实施规范

Standard practice for fitting asbestos cement chimney

NF P33-301:1994 屋顶用纤维水泥成形板材和配件.产品规范和试验方法

Fibre-cement profiled sheets and fittings for roofing. Product specification and test methods.

NF P33-302:1994 屋顶用纤维水泥石板及其配件.产品规范和试验方法

Fibre-cement slates and their fitting for roofing. Product specification and test methods.

ISO 8336:1993 纤维水泥平板

Specifies the characteristics and establishes methods of control and test as well as acceptance conditions. Covers sheets intended for external applications such as cladding fa嘺des, curtain walls, soffits, lost casing, etc., and sheets intended for internal use such as partitions, floors, ceilings, etc. These sheets may have either a smooth or textured surface.

Fibre-cement flat sheets

ISO 390:1993 纤维增强水泥制品 抽样和检验

Establishes rules for batching, sampling, inspection and acceptance/rejection of asbestos-cement products. Provides for a uniform method to be used in determining the accordance of the asbest-cement goods with the relevant requirements for such products and a double sampling plan for the method of inspection by attributes as well as an alternative single sampling plan for the method of inspection by variables.

Products in fibre-reinforced cement; sampling and inspection

P15-202-1993 DTU 27-1.建筑工程.带胶粘剂的防喷矿物纤维制成的覆面.第1部分:技术规范.第2部分:特别条款

DTU 27-1. Building works. Coverings from blown-out mineral fibres with binder. Part 1 : technical specifications - Part 2 : special clauses.

ISO 9125:1990/Cor 1:1993 纤维水泥板和配件 技术勘误1

Replaces the second sentence of subclause 3.5.2.3 as follows: The tube is filled with water and maintained at a height of about 250 mm measured from the upper surface of the test piece, and the level is maintained constant.

Fibre-cement slates and fittings; technical corrigendum 1

ASTM E1494-92(2010) 喷涂或镘刀涂抹的易碎含石棉建筑材料用密封剂的标准操作规程

The purpose of this practice is to provide criteria for the selection of an encapsulant once the decision to encapsulate an asbestos installation has been made. It is assumed that the users of this practice have already made a decision to encapsulate friable asbestos-containing material and that this decision is appropriate. Test Method and Practice shall be consulted for the measurement of airborne fibrous materials in the environmental air space. Since existing asbestos-containing materials installed in buildings may have been applied for a variety of purposes in addition to fire-resistance, encapsulant properties and performance characteristics not addressed in this practice may be important for preservation of original qualities of the asbestos-containing material and should be considered. The results of the test methods described in this practice on nonasbestos-containing materials will not necessarily predict encapsulant performance on friable asbestos-containing building materials. These test methods are designed to characterize the behavior of the encapsulants, rather than to give a definitive indication of their performance on any particular friable asbestos-containg materials. The test methods described in this practice measure characteristics of encapsulants in order to retain essential properties of the building material intended for encapsulation.1.1 This practice covers encapsulants intended to reduce or eliminate the release of asbestos fibers from a matrix of friable spray- or trowel-applied asbestos-containing materials. 1.2 This practice includes: (1) a series of laboratory tests to show whether an encapsulant is capable of acceptable performance on a specified asbestos-free model matrix, and (2) a series of determinations to be conducted in the field at each location for which encapsulation has been accepted, to show whether a given encapsulant is acceptable on the specific asbestos-containing matrix. 1.3 The values stated in SI units are to be regarded as the standard. The values in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Encapsulants for Spray- or Trowel-Applied Friable Asbestos-Containing Building Materials

ANSI/ASTM E1494a:1992 含石棉易碎建筑材料密封剂喷涂或镘刀涂抹规程

Practice for Encapsulants for Spray-or-Trowel-Applied Friable Asbestos-Containing Building Materials (04.11)

JC/T 447-1991 钢丝网石棉水泥中波瓦

Reinforced asbestos-cement middle corrugated tiles

ISO 9384:1991 纤维水泥背瓦

This International Standard specifies the character-istics and establishes methods of control and test as well as acceptance conditions for fibre-cement siding shingles, which are not covered by ISO 880. It applies to shingles of dimensions not exceeding 600 mm × 600 mm. note: 1) National standards may include shingles with dimensions exceeding 600 mm. In this case, all tests with the exception of the heat-rain test should be carried out on elements cut from such shingles. The heat-rain test should always be con-ducted on full-size shingles and the dimensions of the test rig should be adapted accordingly.

Fibre-cement siding shingles

ASTM D3879-91(2004)e1 角闪石石棉取样的标准试验方法

Sampling and conditioning are equally as important as testing. The reliability of the test results depends primarily upon how well the specimens tested represent the true character and condition of the lot of asbestos fiber. Much care and effort are required to be sure that all the sampling operations are systematic or at random, and are representative. Failure to provide a test specimen that accurately represents the lot from which it is drawn will produce misleading test results regardless of the accuracy and the precision of the test method.1.1 This test method describes the procedure for taking a composite sample or a master composite sample (at the mine, at the factory, or from a consignment) from a lot of commercial milled amphibole fibers, conditioning the sample, and reducing it in quantity so as to provide a series of relatively small test specimens of loose asbestos fiber, each of which may be regarded as representative of the lot. (See for sampling strategy.) 1.2 This test method is suitable for taking test specimens of amphibole asbestos for the following test methods: C 1119, C 1120, C 1121, C 1122, C 1123, C 1124, C 1125, C 1162, D 1118, D 2589, D 2752, D 2947, D 2985, D 2987, D 3639, D 3752, and D 3880.1.3 For sampling chrysotile asbestos, use Method D 2590.1.4 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.1.5 Warning-Breathing of asbestos dust is hazardous. Asbestos and asbestos products present demonstrated health risks for users and for those with whom they come into contact. In addition to other precautions, when working with asbestos-cement products, minimize the dust that results. For information on the safe use of chrysoltile asbestos, refer to "Safe Use of Chrysotile Asbestos: A Manual on Preventive and Control Measures."This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. See for a specific hazard warning.

Standard Test Method for Sampling Amphibole Asbestos

SNI 03-2114-1991 非对称波纹石棉板

Asymmetrical corrugated asbestos cement sheets

SNI 03-2126-1991 波纹石棉瓦

Asbestos cement flat panel containing corrugated asbestos cement