91.100.60 隔声和绝热材料 标准查询与下载
共找到 1716 条与 隔声和绝热材料 相关的标准，共 115 页
Thermal insulation products for buildings - Factory-made vacuum insulation panels (VIP) - Specification
- ICS
- 91.100.60
- CCS
- 发布
- 2021-08-00
- 实施
1.本图集适用于新建、扩建、改建的工业与民用建筑的外墙外保温工程；既有建筑的节能改造工程在技术条件相同时也可适用。 2.本系统适用于抗震设防烈度7度的丙类和乙类建筑物。 3.本系统的应用高度不应大于80m。
ZENERGY Glazed Foam Ceramic Insulation Decorative Board Exterior Wall External Insulation System Building Structure
- ICS
- 91.100.60
- CCS
- E509
- 发布
- 2021-07-30
- 实施
- 2021-07-30
本图集适用于新建、扩建、改建的公共建筑的开放式和封闭式非透明幕墙基层墙体外侧、外墙内侧及室内平顶的保温、降噪吸声工程。工业建筑的吸声、节能工程以及既有建筑的节能、降噪吸声改造工程，在技术条件相同时也可适用。
JM superfine glass wool spraying insulation system building structure
- ICS
- 91.100.60
- CCS
- E509
- 发布
- 2021-07-26
- 实施
- 2021-07-27
1.本图集适用于新建、扩建、改建的工业与民用建筑的外墙保温工程；既有建筑的节能改造工程在技术条件相同时也可适用。 2.本系统适用于抗震设防烈度7度的丙类和乙类建筑物。
BE insulation and decoration composite board exterior wall insulation system building structure
- ICS
- 91.100.60
- CCS
- E509
- 发布
- 2021-07-19
- 实施
- 2021-07-21
BS EN 14509-5. Factory-made double skin metal faced insulating sandwich panels - Part 5. Design methods. Determination criteria for combining actions and spans
- ICS
- 91.100.60
- CCS
- 发布
- 2021-07-13
- 实施
- 2021-07-13
本图集适用于新建、扩建、改建的工业与民用建筑的外墙内保温工程；既有建筑的外墙内保温改造工程在技术条件相同时也可适用。
Building structure of HB graphite extruded polystyrene board exterior wall interior insulation system
- ICS
- 91.100.60
- CCS
- E509
- 发布
- 2021-07-08
- 实施
- 2021-07-12
1.本图集适用于新建、扩建、改建的工业与民用建筑的外墙外保温工程；既有建筑的节能改造工程在技术条件相同时也可适用。 2.本系统适用于抗震设防烈度7度的丙类和乙类建筑物。
SKS Inorganic Modified Thermal Insulation and Decorative Composite Board Exterior Wall External Insulation System Building Structure
- ICS
- 91.100.60
- CCS
- E509
- 发布
- 2021-07-05
- 实施
- 2021-07-08
This European Standard specifies requirements for factory made, self-supporting, double skin metal faced insulating sandwich panels, which are intended for discontinuous laying in the following applications: a) roofs and roof cladding; b) external walls and wall cladding; c) walls (including partitions) and ceilings within the building envelope. The insulating core materials covered by this European Standard are rigid polyurethane, expanded polystyrene, extruded polystyrene foam, phenolic foam, cellular glass and mineral wool. NOTE Polyurethane (PUR) includes polyisocyanurate (PIR). Panels with edge details that utilise different materials from the main insulating core are included in this European Standard. Panels used in cold store applications are included in this European Standard. Panels, put on the market as a component of a cold storage room, building and/or building envelope kit are covered by ETA-Guideline 021 “Cold storage premises kits”. This European Standard does not cover the following: i. sandwich panels with a declared thermal conductivity for the insulating core greater than 0,06 W/m•K at 10 °C; ii. products consisting of two or more clearly defined layers of different insulating core materials (multi-layered); iii. panels with perforated facing(s); iv. curved panels.
Self-supporting double skin metal faced insulating panels - Factory made products - Specifications
- ICS
- 91.100.60
- CCS
- 发布
- 2021-07-01
- 实施
This specification covers molded expanded perlite block, fittings, and pipe thermal insulation intended for use on surfaces with temperatures of certain range. The insulation shall not have visible defects that will adversely affect its service qualities. Different test methods shall be performed in order to determine the properties of the block, fitting, and pipe insulations: density, apparent thermal conductivity, linear shrinkage after heat soaking, flexural strength, compressive strength, weight loss by tumbling, moisture content, water absorption after heat aging, surface bearing characteristics, hot-surface performance, and stress corrosion cracking of austenitic stainless steel.
Standard Specification for Molded Expanded Perlite Block and Pipe Thermal Insulation
- ICS
- 91.100.60
- CCS
- 发布
- 2021-07-01
- 实施
This European Standard specifies the requirements for factory made flexible polyethylene foam products which are used for the thermal insulation of building equipment and industrial installations with an operating temperature in the range of approximately - 80 °C to + 150 °C. Tensile stress in the insulation product should be avoided when applying PEF. This is even more important when applying PEF on lines with operating temperatures between - 50 °C and - 80 °C. The tensile stress should be kept at the minimum by applying the foam “under pressure”, i.e. cutting the parts in a generous way. Manufacturer’s advice should be heeded in all cases. The products are manufactured in the form of tubes, profiles, sheets, rolls and tapes with or without coating and/or self-adhesive backing and/or different closure systems. This standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling. Products covered by this standard are also used in prefabricated thermal insulation systems and composite panels; the performance of systems incorporating these products is not covered. This standard does not specify the required level of a given property that should be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a given application can be found in regulations and invitations to tender. Products with a declared thermal conductivity greater than 0,050 W/(m·K) at 10 °C are not covered by this standard. This standard does not cover products for the insulation of the building structure. The normative part of this standard does not cover compressive stress (see C.4).
Thermal insulation products for building equipment and industrial installations. Factory made polyethylene foam (PEF) products
- ICS
- 91.100.60
- CCS
- 发布
- 2021-07-01
- 实施
Factory-made double skin metal faced insulating sandwich panels - Part 1: Self-supporting applications
- ICS
- 91.100.60
- CCS
- 发布
- 2021-07-01
- 实施
- 2021-07-01
Factory-made double skin metal faced insulating sandwich panels - Part 5: Design methods - Determination criteria for combining actions and spans
- ICS
- 91.100.60
- CCS
- 发布
- 2021-07-00
- 实施
1.YTTS保温装饰板外墙外保温系统(简称“外保温系统”） 由YTTS保温装饰板（简称“保温装饰板”）、胶粘剂、锚固组件、金属托架、填缝材料、密封胶等组成。保温装饰板与基层墙体的连接采用胶粘剂粘结及锚固组件相结合方式固定，经板缝密封处理形成墙体保温装饰系统。 2.保温装饰板分为金属面板保温装饰板和无机非金属面板保温装饰板 1）金属面板保温装饰板 由金属面板和保温板组成，在工厂采用粘合剂压制成型，集保温与装饰功能于一体的板状材料。金属面板采用彩色涂层钢板、铝或铝合金板涂层板； 2）无机非金属面板保温装饰板（简称“无机面板保温装饰板”） 由无石棉纤维增强硅酸钙板（简称“无机面板”）和保温板组成，在工厂采用粘合剂压制成型，集保温与装饰功能于一体的板状材料。 3.保温板分为硅岩质无机改性保温板和无机轻集料（珠光砂）保温板 1）硅岩质无机改性保温板（简称：硅岩质板）是以偏高岭土、膨润土、碱性激发剂、可再分散聚合物胶粉、阻燃型膨胀聚苯乙烯颗粒为原料，并辅以发泡剂、憎水剂等添加剂组成，经混合搅拌、布料、压制成型，并经自然或蒸气养护、切割等工艺制成的板材； 2）无机轻集料（珠光砂）保温板（简称：珠光砂板）是以珠光砂轻集料、硅灰为填料，掺加功能性添加剂，经配料、搅拌、压制成型、烧结等工艺制成的板材。
YTTS thermal insulation decorative board external wall external thermal insulation system building structure
- ICS
- 91.100.60
- CCS
- E509
- 发布
- 2021-06-28
- 实施
- 2021-06-29
1.为规范申音爵（HF）材料保温、隔声、吸音在房屋建筑墙体、楼板中应用，确保申音爵（HF）材料保温、隔声、吸音的工程应用质量，制定本标准。 2.本标准适用于新建、改建、扩建及既有房屋建筑墙体、楼板隔声的设计、施工和验收。 3.申音爵（HF）材料保温、隔声、吸音在房屋建筑工程中应用，除应执行本标准外，尚应符合现行国家、行业及本市有关标准的规定。
Shenyinjue (HF) Material Thermal Insulation, Sound Insulation and Sound Absorption Application Technical Standards
- ICS
- 91.100.60
- CCS
- E509
- 发布
- 2021-06-28
- 实施
- 2021-07-08
Thermal insulation products for building applications -- Determination of the resistance to impact of external thermal insulation composite systems (ETICS)
- ICS
- 91.100.60
- CCS
- 发布
- 2021-06-23
- 实施
- 2021-06-23
Acoustics - Determination of airflow resistance - Part 2: Alternating airflow method
- ICS
- 91.100.60
- CCS
- 发布
- 2021-06-22
- 实施
- 2021-06-22
Thermal insulating products for building applications - Determination of linear dimensions of test specimens (ISO/DIS 29768:2021)
- ICS
- 91.100.60
- CCS
- 发布
- 2021-06-15
- 实施
- 2021-06-15
Thermal insulating products for building equipment and industrial installations - Determination of short-term water absorption by partial immersion of preformed pipe insulation (ISO/DIS 12623:2021)
- ICS
- 91.100.60
- CCS
- 发布
- 2021-06-15
- 实施
- 2021-06-15
Thermal insulating products for building equipment and industrial installations - Determination of dimensions, squareness and linearity of preformed pipe insulation (ISO/DIS 12628:2021)
- ICS
- 91.100.60
- CCS
- 发布
- 2021-06-15
- 实施
- 2021-06-15
Thermal insulating products for building equipment and industrial installations - Determination of trace quantities of water soluble chloride, fluoride, silicate, sodium ions and pH (ISO/DIS 12624:2021)
- ICS
- 91.100.60
- CCS
- 发布
- 2021-06-15
- 实施
- 2021-06-15
