91.100.60 隔声和绝热材料 标准查询与下载

ISO/CD 17738-4:2023 隔热产品 — 外墙隔热和饰面系统 (EIFS) — 第 4 部分：现场验证

Thermal insulation products — Exterior insulation and finish systems (EIFS) — Part 4: Site Verification

ISO 12628:2022/CD Amd 1:2023 建筑设备和工业装置用绝热产品 预制管道绝热材料尺寸、方形度和线性度的测定 修正案1

Thermal insulating products for building equipment and industrial installations — Determination of dimensions, squareness and linearity of preformed pipe insulation — Amendment 1

T/HSSIA 005-2023 声屏障产品技术要求

5.1　基本要求 5.2　外观 5.3　当板尺寸偏差 5.4　装配质量 5.5　物理性能 5.6　力学构件要求 6　试验方法 6.1　外观 6.2　尺寸偏差 6.3　装配质量 6.4　声学构件性能要求 7　检验规则 8　标志、包装、运输、贮存

Technical requirements for sound barrier products

ISO/CD 8144-2:2023 隔热 通风屋顶空间用矿棉垫 第 2 部分：通风不受限制的水平应用规范

Thermal insulation — Mineral wool mats for ventilated roof spaces — Part 2: Specification for horizontal applications with unrestricted ventilation

ISO/CD 8145:2023 隔热 屋顶甲板上隔热用矿棉板 规范

Thermal insulation — Mineral wool board for overdeck insulation of roofs — Specification

ISO/PRF 6334:2023 建筑设备和工业装置用隔热产品 膨胀珍珠岩产品 规范

Thermal insulation products for building equipment and industrial installations — Expanded perlite products — Specification

ISO/CD 8144-1:2023 隔热 通风屋顶空间用矿棉垫 第 1 部分：通风受限应用规范

Thermal insulation — Mineral wool mats for ventilated roof spaces — Part 1: Specification for applications with restricted ventilation

ASTM C1676/C1676M-23 微孔绝热材料标准规范

1.1 This specification covers the composition, physical properties, and product forms of microporous thermal insulation for use on surfaces at temperatures from 80°C [176°F] up to 1150°C [2102°F], unless otherwise agreed upon by the manufacturer and purchaser. 1.2 This specification only covers microporous thermal insulation comprising compacted powder, fibers and opacifiers. 1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Microporous Thermal Insulation

ASTM C692-13(2023) 评定绝热对奥氏体不锈钢外部应力腐蚀开裂趋势影响的标准试验方法

1.1 This test method covers two procedures for the laboratory evaluation of thermal insulation materials to determine whether they contribute to external stress corrosion cracking (ESCC) of austenitic stainless steel due to soluble chlorides within the insulation. This laboratory procedure is not intended to cover all of the possible field conditions that contribute to ESCC. 1.2 While the 1977 edition of this test method (Dana test) is applicable only to wicking-type insulations, the procedures in this edition are intended to be applicable to all insulating materials, including cements, some of which disintegrate when tested in accordance with the 1977 edition. Wicking insulations are materials that wet through and through when partially (50 % to 75 %) immersed in water for a short period of time (10 min or less). 1.3 These procedures are intended primarily as a preproduction test for qualification of the basic chemical composition of a particular manufacturer’s product and are not intended to be routine tests for ongoing quality assurance or production lot compliance. Test Methods C871, on the other hand, is used for confirmation of acceptable chemical properties of subsequent lots of insulation previously found acceptable by this test method. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Evaluating the Influence of Thermal Insulations on External Stress Corrosion Cracking Tendency of Austenitic Stainless Steel

ASTM C871-18(2023) 可浸出氯化物、氟化物、硅酸盐和钠离子用隔热材料化学分析的标准试验方法

1.1 These test methods cover laboratory procedures for the determination of water-leachable chloride, fluoride, silicate, and sodium ions in thermal insulation materials in the parts per million range. 1.2 Selection of one of the test methods listed for each of the ionic determinations required shall be made on the basis of laboratory capability and availability of the required equipment and appropriateness to the concentration of the ion and any possible ion interferences in the extraction solution. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Methods for Chemical Analysis of Thermal Insulation Materials for Leachable Chloride, Fluoride, Silicate, and Sodium Ions

ASTM C991-23 金属建筑用柔性纤维玻璃隔热材料的标准规范

1.1 This specification covers the classification, composition, and physical properties of flexible fibrous glass insulation for use in metal building roofs and walls. 1.2 The basic insulation blanket is designed to be postprocessed by a laminating process that applies an adhesive bonded facing. 1.3 The thermal values measured in accordance with this specification for both pre-processed and post-processed insulation are for the insulation only and do not include the effects of air-film surface resistance, changes in mean temperature, or compression of insulation at the framing members of the building, through metal conductance of fasteners and other parallel heat-transfer paths due to design or installation techniques. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Flexible Fibrous Glass Insulation for Metal Buildings

ASTM C1335-23 人造岩石和矿渣矿物纤维绝缘材料非纤维含量测定的标准试验方法

1.1 This test method covers a procedure for determining the non-fibrous content (shot) of man-made rock and slag mineral fiber insulation. The procedure covers a dry sieve analysis method to distinguish between fiberized and non-fiberized (shot) portions of a specimen of man-made rock and slag mineral fiber insulation specimen. 1.2 This test method does not apply to rock or slag materials containing any components other than rock and slag mineral fiber, oil, and organic thermal setting binders. Products containing other types of fibers, inorganic binders, or refractory clays are excluded. NOTE 1—Industrial oils such as mineral or synthetic can be used to enhance the hydrophobic qualities and dust suppression. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Measuring Non-Fibrous Content of Man-Made Rock and Slag Mineral Fiber Insulation

T/YCST 001-2023 柔性砂浆基层岩棉条复合板应用技术规程

本规程分为7章，主要内容包括：1 总则、2 术语、3 基本规定、4 性能要求、5 设计与构造、6 施工、7 验收。

Technical specification for application of rock wool strip composite board with flexible mortar base

23/30450179 DC BS ISO 6334 建筑设备和工业装置的隔热产品 膨胀珍珠岩产品 规格

BS ISO 6334. Thermal insulation products for building equipment and industrial installations. Expanded Perlite products. Specification

ASTM C1728-23 柔性气凝胶绝缘材料标准规范

1.1 This specification covers the classification and performance of flexible aerogel thermal insulation. This will cover the range of continuous exposure operating temperatures from –321°F (–196°C) up to 1200°F (649°C). 1.2 For satisfactory performance, properly installed protective vapor retarders or barriers shall be used on below ambient temperature applications to reduce movement of moisture through or around the insulation to the colder surface. Failure to use a vapor retarder or barrier could lead to insulation and system non-performance. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 The following safety hazards caveat pertains only to the test methods described in this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Flexible Aerogel Insulation

T/SHDSGY 058-2023 网织增强保温装饰板外墙外保温系统材料

本文件规定了网织增强保温装饰板外墙外保温系统材料的术语和定义、基本构造、要求、试验方法、检验规则、标志、包装、运输及贮存。 本文件适用于民用建筑保温采用且为工厂预制成型制品的网织增强保温装饰板外墙外保温材料。

Material for external thermal insulation system of external wall with mesh reinforced thermal insulation decorative board

T/CBMF 211-2023 石线石不燃保温材料

本文件规定了石线石不燃保温材料的分类和标记、要求、试验方法、检验规则以及标志、包装、运输、贮存和随行文件。 本文件适用于建筑墙面和室内顶面用石线石不燃保温材料。

Sillimanite material for fireproof and thermal insulation

23/30468037 DC BS EN 13172 隔热产品 通用评价规则

BS EN 13172. Thermal insulation products. Common evaluation rules

ASTM C1848-17a(2023) 建筑外壳用高压喷射聚氨酯泡沫绝缘材料安装的标准实施规程

1.1 This practice covers the installation of high-pressure spray polyurethane foam (SPF) as an insulation for building enclosure assemblies including: walls, ceilings, attics, floors, and crawl spaces. This practice does not apply to SPF used strictly as a component for an air barrier system or for SPF used in roofing applications. 1.2 Building design criteria and selection of SPF are beyond the scope of this practice. 1.3 The use of SPF insulation covered by this practice is typically regulated by building codes or other agencies that address fire performance. Where required the fire performance of the material shall be addressed through standard fire test methods established by the appropriate governing documents. 1.4 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Installation of High-Pressure Spray Polyurethane Foam Insulation for the Building Enclosure

ASTM C1482-23 聚酰亚胺柔性蜂窝绝热和吸声材料的标准规范

1.1 This specification covers the composition and physical properties of lightweight, flexible open-cell polyimide foam insulation intended for use as thermal and sound-absorbing insulation for temperatures from –328°F up to +572°F (–200°C and +300°C) in commercial and industrial environments. 1.1.1 Annex A1 includes faced polyimide foam as specified by the U.S. Navy for marine applications. 1.1.2 This standard is designed as a material specification and not a design document. Physical property requirements vary by application and temperature. No single test is adequate for estimating either the minimum or maximum use temperature of polyimide foam under all possible conditions. Consult the manufacturer for specific recommendations and physical properties for specific applications. 1.1.3 The use of an appropriate vapor retarder is required in all applications where condensation could occur and cause a decrease in thermal performance or affect other system properties. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard is used to measure and describe the response of materials, products, or assemblies to heat and flame under controlled conditions, but does not by itself incorporate all factors required for fire-hazard or fire-risk assessment of the materials, products, or assemblies under actual fire conditions. NOTE 1—The subject matter of this material specification is not covered by any other ASTM specification. There is no known ISO standard covering the subject of this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Polyimide Flexible Cellular Thermal and Sound Absorbing Insulation