91.120.01 建筑物的防护综合 标准查询与下载

GB/T 36747-2018 干燥环境土遗址保护加固设计规范

Design specification for conservation and reinforcement of earthen site in arid environment

GB/T 22185-2008 体育场馆公共安全通用要求

General requirements of public safety and security for stadium and sports hall

GB 50404-2007 硬泡聚氨酯保温防水工程技术规范

本规范适用于新建、改建、扩建的民用建筑、工业建筑及既有建筑改造的硬泡聚氨酯保温防水工程的设计、施工和质量验收。

Technical code for rigid polyurethane foam insulation and waterproof engineering

GB 50212-2002 建筑防腐蚀工程施工及验收规范

为了提高建筑防腐蚀工程的施工水平，加强对防腐蚀工程施工过程的质量验收控制，保证建筑物和构筑物防腐蚀工程质量，制定本规范。 本规范适用于新建、改建、扩建的建筑物和构筑物防腐蚀工程的施工及验收。

Specification for construction and acceptance of anticorrosive engineering of buildings

GB 50224-1995 建筑防腐蚀工程质量检验评定标准

本标准适用于新建、改建、扩建的建筑物和构筑物防腐蚀工程质量的检验和评定。

Standard for inspection and evaluation of anticorrosive engineering quality of buildings

GB 50178-1993 建筑气候区划标准

本标准适用于一般工业与民用建筑的规划、设汁与施工。

Standard of climatic regionalization for architecture

T/UNP 111-2024 建筑电气防火检测技术规范

前言　 1  范围　 2  规范性引用文件　 3  术语和定义　 4  基本要求　 5  供配电装置　 6  低压配电设备　 7  配电线路　 8  低压用电设备　 9  接地和等电位联结　 10  火灾预防性检测方法　 11  电气火灾危险性评定　

Technical specification for building electrical fire detection

BS 8670-1:2024 建筑安全能力框架 核心标准 实践守则

What is BS 8670-1 - Core criteria for building safety about?  Converting BSI Flex 8670 into a full British Standard, BS 8670-1:2024 is a set of core competence criteria covering the knowledge, skills, experience and behaviours required to work on buildings of all types and scales. The goal is to help raise levels of individual professional competence across the built environment in support of the new Building Safety regime.  Who is BS 8670-1 - Core criteria for building safety for?  BS 8670-1:2024 has been developed for those with responsibility for the development, maintenance or application of sector-specific competence frameworks for roles, functions, activities or tasks undertaken by individuals where these are critical to and directly influence safety in and around buildings.  It's also relevant to clients' understanding of expectations of relevant parties that they may appoint or instruct to undertake work on their behalf.  The standard might also be relevant to regulated, duty-holding or statutory roles, including:  principal designers; principal contractors; designers; contractors; building control professionals; and persons responsible for buildings in occupation. What does BS 8670-1 - Core criteria for building safety cover?  BS 8670-1:2024 gives recommendations for core criteria for building safety to promote high standards of protection for people in and around buildings. It applies to buildings of all types and scales. It is intended to have wide application and relevance in modern construction and property markets throughout the UK and beyond. Building safety in the context of BS 8670-1:2024 relates to the physical conditions created by new or existing buildings, their immediate surroundings and how these impact on the safety of occupants, including residents, throughout the building lifecycle.  NOTE: This British Sta...

Competence frameworks for building safety - Core criteria. Code of practice

DB51/T 3173-2024 砂岩质文物风化病害勘察规范

本文件规定了砂岩质文物风化病害勘察的勘察原则、勘察流程、资料收集、价值评估、赋存环境调查、风化病害调查、取样与测试分析、风化病害评估及勘察报告编写的技术要求。 本文件适用于不可移动砂岩质文物风化病害勘察工作。

Specification for investigation of weathering damage of sandstone cultural relics

DB51/T 3174-2024 砂岩质文物风化病害取样规范

本文件规定了砂岩质文物风化病害治理、评估、研究等工作中岩样、水样和生物样的取样原则、取样工具、取样流程和取样方法。 本文件适用于不可移动砂岩质文物的取样工作。

Specification for sampling of weathering damage of sandstone cultural relics

T/SDECA 5067-2024 QLJR阻隔式外模板现浇混凝土复合墙体防火保温系统建筑构造

总则、术语、基本规定、体系构造和要求、设计、施工和验收等内容，系统地对QLJR阻隔式外模板现浇混凝土复合墙体防火保温系统做了具体的技术要求和规定。同时为进一步对该技术体系的设计提出规范和指导，有针对性地对设计详图和设计构造等作出明确的热工计算和设计要求。

QLJR barrier type external formwork cast-in-place concrete composite wall fire protection and insulation system building structure

T/SDECA 5066-2024 QLJR阻隔式外模板现浇混凝土复合墙体防火保温系统应用技术规程

总则、术语、基本规定、体系构造和要求、设计、施工和验收等内容，系统地对QLJR阻隔式外模板现浇混凝土复合墙体防火保温系统做了具体的技术要求和规定。同时为进一步对该技术体系的设计提出规范和指导，有针对性地对设计详图和设计构造等作出明确的热工计算和设计要求。

QLJR technical regulations for the application of barrier type external formwork cast-in-situ concrete composite wall fire protection and thermal insulation system

ASTM E2239-24 铅危害活动的记录保存和记录保存的标准实施规程

Standard Practice for Record Keeping and Record Preservation for Lead Hazard Activities

DB51/T 3125-2023 居住场所电气防火安全管理规程

本文件规定了居住场所电气防火安全管理的总体要求、电气防火技术、日常电气防火管理、电气火灾隐患整改、电气防火宣传与培训、电气防火档案的要求。 本文件适用于四川省行政区域内投入使用的公寓、宿舍和住宅等居住场所的电气防火安全管理工作。居（村）民自建住宅的电气防火安全管理工作可参照执行。

Electrical Fire Safety Management Regulations for Residential Places

T/SDECA 5076-2022 拉片式钢丝网片组合保温板现浇混凝土墙体保温系统建筑构造

总则、术语、基本规定、体系构造和要求、设计、施工和验收等内容，系统地对拉片式钢丝网片组合保温板现浇混凝土墙体保温系统建筑构造做了具体的技术要求和规定。同时为进一步对该技术体系的设计提出规范和指导，有针对性地对设计详图和设计构造等作出明确的热工计算和设计要求。

Pull-tab steel mesh combined insulation board cast-in-place concrete wall insulation system building structure

DB3308/T 139-2023 人民防空工程维护管理规程

Maintenance and Management Regulations for Civil Air Defense Projects

T/CSIA 016-2023 隔离式改性纳米石墨泡沫塑料板外墙防火保温系统应用技术规程

5  系统与材料　6 5.1　一般规定　6 5.2　隔离式外贴板系统　8 5.3  隔离式装饰板系统　12 5.4  隔离式外模板系统　14 5.5  隔离式条板系统　16 6  设计　20 6.1  一般规定　20 6.2  隔离式外贴板系统　21 6.3  隔离式装饰板系统　22 6.4  隔离式外模板系统　23 6.5  隔离式条板系统　25 7  施工　28 7.1  一般规定　28 7.2  隔离式外贴板系统　29 7.3  隔离式装饰板系统　31 7.4  隔离式外模板系统　32 7.5  隔离式条板系统　33 8  验收　34 8.1  一般规定　34 8.2  主控项目　35 8.3  一般项目　37

Application technology specification for external fireproof thermal insulation using partition type of structural modified nano graphite foam plastic board

23/30462047 DC BS 8670 建筑环境 在能力框架中构建安全的核心标准 实践守则

BS 8670. Built environment. Core criteria for building safety in competence frameworks. Code of practice

DB3308/T 137-2023 全域白蚁防治技术规程

Technical regulations for global termite control

T/CASME 531-2023 建筑用外墙保温隔热气凝胶涂料

本文件规定了建筑用外墙保温隔热气凝胶涂料的技术要求、试验方法、检验规则、标志、包装、运输和贮存。

Aerogel coating for building exterior wall insulation