91.120.20 建筑物声学、隔音 标准查询与下载

ASTM F2154-13(2019) 表面有穿孔纤维玻璃布的纤维玻璃吸声板的标准规范

1.1 This specification covers fibrous glass sound-absorbing board with a perforated fibrous glass cloth facing for sound reduction in ship spaces with high noise levels. This specification is primarily for materials used on ships. Additional requirements, testing, and certification are required for use of this material aboard U.S. Coast Guard inspected vessels in the United States. 1.2 Supplemental requirements and exceptions to the requirements discussed herein for ships of the U.S. Navy are included in Supplementary Requirements S1. 1.3 This standard measures and describes the response of materials, products, or assemblies to heat and flame under controlled conditions, but does not by itself incorporate all factors required for fire hazard or fire risk assessment of materials, products, or assemblies under actual fire conditions. 1.4 The values stated in SI units are to be regarded as standard. The values given in parentheses are mathematical conversions to inch-pound units that are provided for information only and are not considered standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Sound-Absorbing Board, Fibrous Glass, Perforated Fibrous Glass Cloth Faced

JIS A 1418-2:2019 声学. 建筑物隔绝地板冲击燥音的测量. 第2部分: 使用标准重型冲击源的方法

Acoustics -- Measurement of floor impact sound insulation of buildings -- Part 2: Method using standard heavy impact sources

ASTM E1007-19 通过地板天花板组件和相关支撑结构现场测量攻丝机冲击声传播的标准试验方法

Standard Test Method for Field Measurement of Tapping Machine Impact Sound Transmission Through Floor-Ceiling Assemblies and Associated Support Structures

ASTM C636/C636M-19 用于安装金属天花板悬挂系统的标准实践用于声瓦和放置面板

1.1 This practice covers the installation of suspension systems for acoustical tile and lay-in panels. It is applicable to contractors whose services are utilized for installing acoustical ceilings and to other trades if their activities are responsible for interference with ceiling components or performance as defined in this recommended practice. 1.2 While the practices described in this document have equal application to fire-resistive suspension systems, many systems impose additional requirements to obtain the fire endurance classification of particular floor-ceiling or roofceiling assemblies. These details are available from the listing agency and from the manufacturers. 1.3 Similarly, additional detailing is often necessary to meet sound attenuation requirements when ceiling plenums extend over contiguous rooms. Obtain these from the manufacturer of the acoustical material employed. 1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems result in non-conformance with the standard. 1.5 While many of the practices described in this practice have application to the installation of metal suspension systems in exterior environments, the specific design of exterior ceiling installations requires the review and approval of the architect or engineer, or both, who are responsible for the construction of the building or modifications to an existing building. While recommendations from the manufacturer are solicited, it remains the final responsibility of the architect/engineer to ensure proper application of the materials in question. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Installation of Metal Ceiling Suspension Systems for Acoustical Tile and Lay-In Panels

ASTM E2249-19 用声强对建筑物隔墙和构件的空气传播损失进行实验室测量的标准试验方法

1.1 This test method covers the measurement of airborne sound transmission loss of building partitions such as walls of all kinds, operable partitions, floor-ceiling assemblies, doors, windows, roofs, panels and other space-dividing building elements. It may also be have applications in sectors other than the building industry, although these are beyond the scope. 1.2 The primary quantity reported by this standard is Intensity Transmission Loss (ITL) and shall not be given another name. Similarly, the single-number rating Intensity Sound Transmission Class (ISTC) derived from the measured ITL shall not be given any other name. 1.3 This test method may be used to reveal the sound radiation characteristics of a partition or portion thereof. 1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. NOTE 1—The method for measuring the sound intensity radiated by the building element under test defined by this ASTM standard meets or exceeds those of ISO 15186-1. Special consideration will have to be given to requirements for the source room and specimen mounting if compliance with ISO 15186-1 is also desired as they differ from those of this standard. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Laboratory Measurement of Airborne Transmission Loss of Building Partitions and Elements Using Sound Intensity

ASTM E336-19 测量建筑物房间间空气声衰减的标准试验方法

Standard Test Method for Measurement of Airborne Sound Attenuation between Rooms in Buildings

ASTM E1050-19 用管、两个传声器和数字频率分析系统测定声学材料的阻抗和吸收的标准试验方法

1.1 This test method covers the use of an impedance tube, two microphone locations, and a digital frequency analysis system for the determination of normal incidence sound absorption coefficients and normal specific acoustic impedance ratios of materials. 1.2 Laboratory Accreditation—A procedure for accrediting a laboratory for performing this test method is given in Annex A1. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Impedance and Absorption of Acoustical Materials Using A Tube, Two Microphones and A Digital Frequency Analysis System

KS F ISO 15186-1-2018 声学 - 使用声强测量建筑物和建筑构件中的隔声 - 第1部分:实验室测量

Acoustics — Measurement of sound insulation in buildings and of building elements using sound intensity — Part 1: Laboratory measurements

KS F ISO 15186-1-2018(2023) 声学.用声强测量建筑物和建筑构件的隔声.第1部分:实验室测量

Acoustics — Measurement of sound insulation in buildings and of building elements using sound intensity — Part 1: Laboratory measurements

KS F ISO 15186-1:2018 声学 - 使用声强测量建筑物和建筑构件中的隔声 - 第1部分:实验室测量

Acoustics — Measurement of sound insulation in buildings and of building elements using sound intensity — Part 1: Laboratory measurements

BS ISO 20189:2018 声学 供室内使用的屏风、家具和单个物品 根据实验室测量对元件的吸声和隔音效果进行评级

What is ISO 20189 about?    ISO 20189 is an international standard on acoustics that covers rating of sound absorption and sound reduction of screens, furniture and single objects intended for interior use.   ISO 20189 specifies how screens, furniture and single objects intended for interior use are assessed with regards to sound absorption and specifies the evaluation of sound attenuation for floor screens.   ISO 20189 also specifies under which circumstances various interior products for offices, schools and other public spaces are considered as plane absorbers or as discrete single objects.   Who is ISO 20189 for?   ISO 20189 on acoustics that covers rating of sound absorption and reduction is relevant to:   

Acoustics. Screens, furniture and single objects intended for interior use. Rating of sound absorption and sound reduction of elements based on laboratory measurements

ISO 20189:2018 声学 - 屏幕用于室内使用的家具和单个物品 - 第1部分:基于实验室测量的元件的吸声和声音降低等级

This document specifies how screens, furniture and single objects intended for interior use are assessed with regard to sound absorption and specifies the evaluation of sound attenuation for floor screens. It also specifies under which circumstances various interior products for offices, schools and other public spaces are considered as plane absorbers or as discrete single objects. A product considered as a single object and intended for interior use is measured according to ISO 354 and evaluated by its equivalent sound absorption area or object sound absorption coefficient in octave bands. This document defines interior products and single objects and it comprises additional information regarding measurements and assessment of single objects. The sound absorption as specified in this document can be used to calculate: a) reverberation time characteristics in rooms; b) room acoustic parameters using ray tracing software.

Acoustics — Screens, furniture and single objects intended for interior use — Rating of sound absorption and sound reduction of elements based on laboratory measurements

ASTM E3090/E3090M-18 金属天花板悬挂系统强度性能标准试验方法

Standard Test Methods for Strength Properties of Metal Ceiling Suspension Systems

ASTM E966-18a 现场测量建筑立面和立面元件空气声衰减的标准指南

1.1 This guide may be used to determine the outdoor-indoor noise reduction (OINR), which is the difference in sound pressure level between the free-field level outdoors in the absence of the structure and the resulting sound pressure level in a room. Either a loudspeaker or existing traffic noise or aircraft noise can be used as the source. The outdoor sound field geometry must be described and calculations must account for the way the outdoor level is measured. These results are used with Classification E1332 to calculate the single number rating outdoor-indoor noise isolation class, OINIC. Both OINR and OINIC can vary with outdoor sound incidence angle. 1.2 Under controlled circumstances where a single façade is exposed to the outdoor sound, or a façade element such as a door or window has much lower transmission loss than the rest of the façade, an outdoor-indoor transmission loss, OITL(θ), or apparent outdoor-indoor transmission loss, AOITL(θ), may be measured using a loudspeaker source. These results are a function of the angle of incidence of the sound field. By measuring with sound incident at many angles, an approximation to the diffuse field transmission loss as measured between two rooms can be obtained. The results may be used to predict interior sound levels in installations similar to that tested when exposed to an outdoor sound field similar to that used during the measurement. The single number ratings of apparent outdoor-indoor transmission class, AOITC(θ), using AOITL(θ) and field outdoor-indoor transmission class, FOITC(θ), using OITL(θ) may be calculated using Classification E1332. These ratings also may be calculated with the data obtained from receiving room sound pressure measurements performed at several incidence angles as discussed in 8.6. 1.3 To cope with the variety of outdoor incident sound field geometries that are encountered in the field, six testing techniques are presented. These techniques and their general applicability are summarized in Table 1 and Figs. 1-6. The 1 This guide is under the jurisdiction of ASTM Committee E33 on Building and Environmental Acoustics and is the direct responsibility of Subcommittee E33.03 on Sound Transmission. Current edition approved Nov. 1, 2018. Published November 2018. Originally approved in 1984. Last previous edition approved in 2018 as E966 – 18. DOI: 10.1520/E0966-18A. Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. 1 room, façade, or façade element declared to be under test is referred to as the specimen. 1.4 The text of this standard references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard. 1.5 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for Field Measurements of Airborne Sound Attenuation of Building Facades and Facade Elements

KS F 4770-4-2018 隔音板 - 木制

Soundproof panel — Wood

JG/T 519-2018 建筑用热流计

　　现批准《建筑用热流计》为建筑工业行业产品标准，编号为JG/T519-2018，自2018年12月1日起实施。原《建筑用热流计》JG/T3016-1994同时废止。 　　本标准在住房城乡建设部门户网站（www.mohurd.gov.cn）公开，并由住房城乡建设部标准定额研究所组织中国标准出版社出版发行。 　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　中华人民共和国住房和城乡建设部 　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　2018年5月30日

Heat flow meter for building

CEN/TR 16961:2018 测试报告中的不确定性声明

The purpose of this document is to indicate how to present the uncertainty data determined by EN ISO 12999-1 in a laboratory test report of the Sound reduction index R of a building product or a building system, determined in accordance with EN ISO 717-1 and EN ISO 10140-2:2010, Figure B.1. It is planned to include this information in EN ISO 10140-2.

Declaration of uncertainties in test reports

DIN EN 16205:2018 地板上行走噪音的实验室测量; 德文版本EN 16205-2013+A1-2018

This European Standard specifies a laboratory measurement methods to determine noise radiated from a floor covering on a standard concrete floor when excited by a standard tapping machine. Extension of the existing standard to resilient flooring, textile flooring and laminate floor coverings; the amended draft to include an annex reporting about the inter-laboratory trials to be conducted, covering representative samples of all CEN/TC 134 product groups.

Laboratory measurement of walking noise on floors; German version EN 16205:2013+A1:2018

PD CEN/TR 16961:2018 测试报告中的不确定性声明

Declaration of uncertainties in test reports

BS EN ISO 16283-1:2014+A1:2017 声学 建筑物和建筑构件隔音的现场测量 空气传播隔音

1   Scope This part of ISO 16283 specifies procedures to determine the airborne sound insulation between two rooms in a building using sound pressure measurements. These procedures are intended for room volumes in the range from 10 m 3 to 250 m 3 in the frequency range from 50 Hz to 5 000 Hz. The test results can be used to quantify, assess and compare the airborne sound insulation in unfurnished or furnished rooms where the sound field may or may not approximate to a diffuse field. The measured airborne sound insulation is frequency-dependent and can be converted into a single number quantity to characterize the acoustic performance using the rating procedures in ISO 717‑1.

Acoustics. Field measurement of sound insulation in buildings and of building elements - Airborne sound insulation