91.120.20 建筑物声学、隔音 标准查询与下载

GSO ISO 15712-4:2013 建筑声学 根据元件的性能评估建筑物的声学性能 第4部分：内部声音传输到外部

This European Standard describes a calculation model for the sound power level radiated by the envelope of a building due to airborne sound inside that building, primarily by means of measured sound pressure levels inside the building and measured data which characterize the sound transmission by the relevant elements and openings in the building envelope. These sound power levels, together with those of other sound sources in or in front of the building envelope, form the basis for the calculation of the sound pressure level at a chosen distance from a building as a measure for the acoustic performance of buildings. The prediction of the inside sound pressure level from knowledge of the indoor sound sources is outside the scope of this European Standard. The prediction of the outdoor sound propagation is outside the scope of this European Standard. NOTE For simple propagation conditions an approach is given for the estimation of the sound pressure level in informative annex E. This European Standard describes the principles of the calculation model, lists the relevant quantities and defines its applications and restrictions. It is intended for acoustical experts and provides the framework for the development of application documents and tools for other users in the field of building construction, taking into account local circumstances

Building acoustics -- Estimation of acoustic performance of buildings from the performance of elements -- Part 4: Transmission of indoor sound to the outside

GSO ISO 15186-2:2013 声学 从建筑物的某些部分测量建筑物内的声音和隔音效果以及声音使用的强度 第2部分：现场测量

1.1 General This part of ISO 15186 specifies a sound intensity method to determine the in-situ sound insulation of walls, floors, doors, windows and small building elements. It is intended for measurements that have to be made in the presence of flanking transmission. It can be used to provide sound power data for diagnostic analysis of flanking transmission or to measure flanking sound insulation parameters. This part of ISO 15186 can be used by laboratories that could not satisfy the requirements of ISO 15186-1, which deals with laboratory measurements with no or little flanking transmission. ISO 15186-3 deals with measurements under laboratory conditions, at low frequencies. This part of ISO 15186 also describes the effect of flanking transmission on measurements made using the specified method, and how intensity measurements can be used — to compare the in-situ sound insulation of a building element with laboratory measurements where flanking has been suppressed (i.e. ISO 140-3), — to rank the partial contributions for building elements, and — to measure the flanking sound reduction index for one or more transmission paths (for validation of prediction models such as those given in EN 12354-1). This method gives values for airborne sound insulation, which are frequency dependent. They can be converted into a single number, characterizing the acoustic performance, by application of ISO 717-1. 1.2 Precision The reproducibility of this intensity method is estimated to be equal to or better than that of the methods of ISO 140-10 and ISO 140-4, when measuring a single small and large building element, respectively. NOTE 1 If sound reduction measures made using this method are to be compared with those made using the conventional reverberation room method in various parts of ISO 140, then it will be necessary to introduce an adaptation term that reflects the bias between the test methods. This term is given in Annex A. NOTE 2 Some information about the accuracy for this part of ISO 15186 and its relationship to the sound reduction index measured according to ISO 140-3 and ISO 140-4 is given in Annex B. NOTE 3 Flanking transmission is discussed in Annex C.

Acoustics -- Measurement of sound insulation in buildings and of building elements using sound intensity -- Part 2: Field measurements

GSO ISO 10848-4:2013 声学 相邻房间之间空气传播和撞击声音的侧向传输的实验室测量 第4部分：应用于至少有一个重元素的连接处

This part of ISO 10848 specifies laboratory measurements of normalized flanking level difference, normalized flanking impact sound pressure level or vibration reduction index of buildings where at least one of the elements that form the construction under test is not a light element. This part of ISO 10848 applies to T- or X-junctions

Acoustics -- Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining rooms -- Part 4: Application to junctions with at least one heavy element

GSO ISO 15186-1:2013 声学 使用声音强度测量建筑物和建筑构件的隔音效果 第1部分：实验室测量

This part of ISO 15186 specifies a sound intensity method to determine the sound reduction index and the element-normalized level difference of building elements. The method can be used as an alternative to ISO 140-3 and ISO 140-10 respectively. One important use is when the traditional ISO 140-3 method fails because of high flanking transmission. The reproducibility of this intensity method is estimated to be equal to or better than that of ISO 140-3. NOTE Some information about the accuracy with which this part of ISO 15186 can reproduce the sound reduction index measured according to ISO 140-3 is given in annex A.

Acoustics -- Measurement of sound insulation in buildings and of building elements using sound intensity -- Part 1: Laboratory measurements

GSO ISO 3382-3:2013 声学 测量房间声音变量 第3部分：开放式办公室

This part of ISO 3382 specifies methods for the measurement of room acoustic properties in open plan offices with furnishing. It specifies measurement procedures, the apparatus needed, the coverage required, the method for evaluating the data, and the presentation of the test report. The measurement results can be used to evaluate room acoustic properties in open plan offices. This part of ISO 3382 is intended for medium and large size open plan offices.The measurement results can be used to evaluate room acoustic properties in open plan offices. This part of ISO 3382 is intended for medium and large size open plan offices.

Acoustics -- Measurement of room acoustic parameters -- Part 3: Open plan offices

GSO ISO 10140-3:2013 声学 测量建筑构件隔音效果的实验室 第3部分：测量隔音效果

This part of ISO 10140 specifies laboratory methods for measuring the impact sound insulation of floor assemblies. The test results can be used to compare the sound insulation properties of building elements, classify elements according to their sound insulation capabilities, help design building products which require certain acoustic properties and estimate the in situ performance in complete buildings. The measurements are performed in laboratory test facilities in which sound transmission via flanking paths is suppressed. The results of measurements made in accordance with this part of ISO 10140 are not applicable directly to the field situation without accounting for other factors affecting sound insulation, such as flanking transmission, boundary conditions, and loss factor. A test method is specified that uses the standard tapping machine (see ISO 10140-5:2010, Annex E) to simulate impact sources like human footsteps when a person is wearing shoes. This part of ISO 10140 is applicable to all types of floors (whether heavyweight or lightweight) with all types of floor coverings. The test method applies only to laboratory measurements. NOTE When the aim of impact sound insulation measurements is to have a strong correlation between a “real” impact source (e.g. a person walking or children jumping) and an artificial impact source (e.g. a tapping machine), it is intended that both sources apply the same input force spectrum to ensure the correct ranking of floors and floor coverings for the “real” and the artificial source, and it is intended that the impedance spectra of the sources be the same. If the “real” impact source is a walking person without shoes and the artificial source is a standard tapping machine such as that specified in Clause 4, the correlation is not strong. An alternative method, using a heavy/soft impact source for assessing the impact sound insulation of a floor against impact sources with strong low-frequency components, such as human footsteps (bare feet) or children jumping, is given in Annex A. Alternative impact sources (i.e. a proposed modification of the standard tapping machine to make its dynamic source characteristics similar to those of a person walking barefoot and a heavy/soft impact source with dynamic source characteristics similar to those of children jumping) are defined in ISO 10140-5:2010, Annex F. A method to test floor coverings is described in ISO 10140-1:2010, Annex H, for single- or multi-layer floor coverings installed on specific reference floors. In the case of multi-layer coverings, they can be factory-assembled or assembled at the test site.

Acoustics -- Laboratory measurement of sound insulation of building elements -- Part 3: Measurement of impact sound insulation

GSO ISO 10140-5:2013 声学 建筑构件隔音的实验室测量 第5部分：测试设施和设备的要求

This part of ISO 10140 specifies laboratory test facilities and equipment for sound insulation measurements of building elements, such as: — components and materials; — building elements; — technical elements (small building elements); — sound insulation improvement systems. It is applicable to laboratory test facilities with suppressed radiation from flanking elements and structural isolation between source and receiving rooms. This part of ISO 10140 specifies qualification procedures for use when commissioning a new test facility with equipment for sound insulation measurements. It is intended that these procedures be repeated periodically to ensure that there are no issues with the equipment and the test facility.

Acoustics -- Laboratory measurement of sound insulation of building elements -- Part 5: Requirements for test facilities and equipment

GSO ISO 140-7:2013 声学 测量建筑物和建筑构件的隔音效果 第7部分：建筑物地板隔音效果的实验室测量

Acoustics -- Measurement of sound insulation in buildings and of building elements -- Part 7: Field measurements of impact sound insulation of floors

Acoustics -- Measurement of sound insulation in buildings and of building elements -- Part 7: Field measurements of impact sound insulation of floors

GSO ISO 17497-2:2013 声学 表面的声散射特性 第2部分：开放（自由）场中定向扩散系数的测量

This part of ISO 17497 specifies a method of measuring the directional diffusion coefficient of surfaces. The diffusion coefficient characterizes the sound reflected from a surface in terms of the uniformity of the reflected polar distribution. The diffusion coefficient is a measure of quality designed to inform producers and users of surfaces that, either deliberately or accidentally, diffuse sound. It can also inform developers and users of geometric room acoustic models. The diffusion coefficient is not suitable for direct use as an input to current diffusion algorithms in geometric room acoustic models. This part of ISO 17497 details a free-field characterization method.

Acoustics -- Sound-scattering properties of surfaces -- Part 2: Measurement of the directional diffusion coefficient in a free field

GSO ISO 10140-2:2013 声学 测量建筑构件隔音的实验室 第2部分：测量大气隔音

This part of ISO 10140 specifies a laboratory method for measuring the airborne sound insulation of building products, such as walls, floors, doors, windows, shutters, façade elements, façades, glazing, small technical elements, for instance transfer air devices, airing panels (ventilation panels), outdoor air intakes, electrical raceways, transit sealing systems and combinations, for example walls or floors with linings, suspended ceilings or floating floors. The test results can be used to compare the sound insulation properties of building elements, classify elements according to their sound insulation capabilities, help design building products which require certain acoustic properties and estimate the in situ performance in complete buildings. The measurements are performed in laboratory test facilities in which sound transmission via flanking paths is suppressed. The results of measurements made in accordance with this part of ISO 10140 are not applicable directly to the field situation without accounting for other factors affecting sound insulation, such as flanking transmission, boundary conditions and total loss factor.

Acoustics -- Laboratory measurement of sound insulation of building elements -- Part 2: Measurement of airborne sound insulation

KS F 4770-3-2013(2018) 隔音板 非金属有色

Soundproof panel - Non metallic colored

KS F 4770-3-2013 隔音板.非金属色

이 표준은 소음의 저감을 위해 설치되는 방음벽의 일부를 구성하는 방음판 중 비금속재 컬러 방음판(이하 방음판이라 한다.)에 대하여 규정한다.

Soundproof panel - Non metallic colored

KS F 4770-3-2013(2023) 隔音板-非金属色

Soundproof panel - Non metallic colored

KS F 4770-4-2013 隔音板.木材

이 표준은 소음의 저감을 위해 설치되는 방음벽의 일부를 구성하는 방음판 중 목재 방음판(이하 방음판이라 한다.)에 대하여 규정한다.

Soundproof panel - Wooden

GSO ISO 3382-2:2013 声学 在声音测试室中测量可变参数 第2部分：正常房间中的混响时间

This part of ISO 3382 specifies methods for the measurement of reverberation time in ordinary rooms. It describes the measurement procedure, the apparatus needed, the required number of measurement positions, and the method for evaluating the data and presenting the test report. The measurement results can be used for correction of other acoustic measurements, e.g. sound pressure level from sound sources or measurements of sound insulation, and for comparison with requirements for reverberation time in rooms.

Acoustics - Measurement of room acoustic parameters - Part 2: Reverberation time in ordinary rooms

GSO ISO 3382-1:2013 声学 测量声音测试室中的可变因素 第1部分：表演空间

This part of ISO 3382 specifies methods for the measurement of reverberation time and other room acoustical parameters in performance spaces. It describes the measurement procedure, the apparatus needed, the coverage required, and the method of evaluating the data and presenting the test report. It is intended for the application of modern digital measuring techniques and for the evaluation of room acoustical parameters derived from impulse responses.

Acoustics -- Measurement of room acoustic parameters -- Part 1: Performance spaces

GSO ISO 10140-1:2013 声学 建筑构件隔音水平的实验室测量 第1部分：特定产品的应用规则

This part of ISO 10140 specifies test requirements for building elements and products, including detailed requirements for preparation, mounting, operating and test conditions, as well as applicable quantities and additional test information for reporting. The general procedures for airborne and impact sound insulation measurements are given in ISO 10140-2 and ISO 10140-3, respectively.

Acoustics - Laboratory measurement of sound insulation of building elements -- Part 1: Application rules for specific products

13/30278574 DC BS EN ISO 10140-3 AMD2 声学 建筑构件隔音的实验室测量 第3部分.冲击隔声测量

BS EN ISO 10140-3 AMD2. Acoustics. Laboratory measurement of sound insulation of building elements. Part 3. Measurement of impact sound insulation

DIN EN 16205:2013 地板上行走噪音的实验室测量.德文版本EN 16205-2013

Laboratory measurement of walking noise on floors; German version EN 16205:2013

NF S31-099-1:2013 建筑构件和建筑物的声学特性 - 房屋建筑设备发出的空气传播和结构传播的声音的实验室测量 - 第1部分: 以按摩浴缸为例, 设备移动性高于接收器移动性的简单情形

Acoustic properties of building elements and of buildings - Laboratory measurement of airborne and structure borne sound from building equipment - Part 1: simplified cases where the equipment mobilities are much higher than the receiver mobilities, taking