91.120.20 建筑物声学、隔音 标准查询与下载

NF S31-074:2013 地板上行走噪音的实验室测量

Laboratory measurement of walking noise on floors

NF S31-097-4:2013 声学 - 邻接房之间气载声音和碰撞噪音侧向传声实验室测量 - 第4部分: 连接处有至少一个重型构件的应用

Acoustics - Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining rooms - Part 4: application to junctions with at least one heavy element

LST EN ISO 717-1:2013 声学. 建筑物和建筑物构件隔声评定. 第1部分: 气载声隔音(ISO 717-1-2013)

Acoustics - Rating of sound insulation in buildings and of building elements - Part 1: Airborne sound insulation (ISO 717-1:2013)

13/30269219 DC BS EN ISO 10140-3 AMD3 声学 建筑构件隔音的实验室测量 第3部分.冲击隔声测量

BS EN ISO 10140-3 AMD3. Acoustics. Laboratory measurement of sound insulation of building elements. Part 3. Measurement of impact sound insulation

DS/EN 16205:2013 地板行走噪音的实验室测量

This European Standard specifies a laboratory measurement method to determine noise radiated from a floor covering on a standard concrete floor when excited by a standard tapping machine.

Laboratory measurement of walking noise on floors

DIN 52210-6:2013 建筑物声学检测.气载噪声和隔音.第6部分:竖井噪声级差的测定

Testing of acoustics in buildings - Airborne and impact sound insulation - Determination of the level difference by shafts

BS EN 16205:2013 地板上行走噪音的实验室测量

Laboratory measurement of walking noise on floors

SAE J1637-2013 支撑钢棒上材料的组合振动阻尼特性的实验室测量

This SAE Recommended Practice describes a laboratory test procedure for measuring the vibration damping performance of a system consisting of a damping material bonded to a vibrating cantilevered steel bar. The bar is often called the Oberst bar (named after Dr. H. Oberst) and the test method is often called the Oberst Bar Test Method. Materials for damping treatments may include homogeneous materials, nonhomogeneous materials, or a combination of homogeneous, nonhomogeneous, and/or inelastic (such as aluminum foil) materials. These materials are commonly installed in transportation systems such as ground vehicles, marine products, and aircraft to reduce vi

Laboratory Measurement of the Composite Vibration Damping Properties of Materials on a Supporting Steel Bar

ASTM E477-13e1 管道衬管材料和预制消声器声学和气流性能实验室测量的标准测试方法

1.1 This test method covers the laboratory testing of some of the acoustical properties of sound attenuating devices including duct liner materials, integral ducts, and in-duct absorptive straight and elbow silencers used in the ventilation systems of buildings. Procedures are described for the measurement of acoustical insertion loss, airflow generated noise, and pressure drop as a function of airflow. 1.2 Excluded from the scope are reactive mufflers and those designed for uses other than in ventilation systems, such as automobile mufflers. 1.3 This test method includes a provision for a simulated semi-reflective plenum to fit around thin-walled duct and silencer test specimens, since the acoustical environments around such thin-walled specimens can affect the measured insertion loss. 1.4 This method tests the performance of the specimen in well-defined and controlled conditions. If the specimen is installed in the field in any different manner, the results may be different. This standard does not provide estimating procedures for determining the actual installed performance of the specimen under field conditions. 1.5 The values stated in SI units are to be regarded as standard. The values in parentheses are provided for information only. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Laboratory Measurements of Acoustical and Airflow Performance of Duct Liner Materials and Prefabricated Silencers

EN 16205:2013 行走在地板上的噪声的实验室测量

This European Standard specifies a laboratory measurement method to determine noise radiated from a floor covering on a standard concrete floor when excited by a standard tapping machine.

Laboratory measurement of walking noise on floors

DIN EN ISO 717-1:2013 声学.建筑和建筑构件的隔声标定.第1部分:空气声隔声(ISO 717-1-2013).德文版本EN ISO 717-1-2013

Acoustics - Rating of sound insulation in buildings and of building elements - Part 1: Airborne sound insulation (ISO 717-1:2013); German version EN ISO 717-1:2013

DIN EN ISO 717-2:2013 声学.建筑和建筑构件的隔声标定.第2部分:撞击声隔声(ISO 717-2-2013).德文版本EN ISO 717-2-2013

Acoustics - Rating of sound insulation in buildings and of building elements - Part 2: Impact sound insulation (ISO 717-2:2013); German version EN ISO 717-2:2013

NF S31-032-2:2013 声学.建筑和建筑构件的隔音率.第2部分:冲击声隔绝

Acoustics - Rating of sound insulation in buildings and of building elements - Part 2: impact sound insulation

NF S31-049-1/A1:2013 声学.建筑物和建筑构件的隔声测量.第1部分:能抑制侧向传声的实验室试验装置的要求.修改件1:填充料和/或密封剂灌封接头的声衰减指数测定指南

Acoustics - Laboratory measurement of sound insulation of building elements - Part 1: application rules for specific products - Amendment 1 : guidelines for the determination of the sound reduction index of joints flled with fillers and/or seals

NF S31-032-1:2013 声学 - 建筑和建筑构件隔声等级 - 第1部分: 气载声隔音

Acoustics - Rating of sound insulation in buildings and of building elements - Part 1: airborne sound insulation

DS/EN ISO 717-2:2013 声学 建筑物和建筑构件的隔音等级 第2部分：冲击隔音

ISO 717-2:2013: a) defines single-number quantities for impact sound insulation in buildings and of floors; b) gives rules for determining these quantities from the results of measurements carried out in one-third-octave bands in accordance with ISO 10140

Acoustics - Rating of sound insulation in buildings and of building elements - Part 2: Impact sound insulation

DS/EN ISO 717-1:2013 声学 建筑物和建筑构件的隔音等级 第1部分：空气隔音

ISO 717-1:2013: a) defines single-number quantities for airborne sound insulation in buildings and of building elements such as walls, floors, doors, and windows; b) takes into consideration the different sound level spectra of various noise sources such

Acoustics - Rating of sound insulation in buildings and of building elements - Part 1: Airborne sound insulation

GSO ISO 10848-1:2013 声学 相邻房间之间空气传播和撞击声侧向传输的实验室测量 第1部分：框架文件

ISO 10848 specifies measurement methods to be performed in a laboratory test facility in order to characterize the flanking transmission of one or several building components. The performance of the building components is expressed either as an overall quantity for the combination of elements and junction (such as Dn,f and/or Ln,f ) or as the vibration reduction index Kij of a junction. This part of ISO 10848 contains definitions, general requirements for test specimens and test rooms, and measurement methods. Guidelines are given for the selection of the quantity to be measured depending on the junction and the types of building elements involved. Other parts of ISO 10848 specify the application for different types of junction and building elements. The quantities characterizing the flanking transmission can be used to compare different products, or to express a requirement, or as input data for prediction methods, such as EN 12354-1 and EN 12354-2.

Acoustics -- Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining rooms -- Part 1: Frame document

GSO ISO 717-1:2013 声学 建筑物和建筑构件的隔音等级 第1部分：空气隔音

This part of IS0 717 a)defines single-number quantities for airborne sound insulation in buildings and of building elements such as walls, floors, doors and windows; b) takes into consideration the different sound level spectra of various noise sources such as noise sources inside a building and traffic outside a building; and C)gives rules for determining these quantities from the results of measurements carried out in onethird- octave or octave bands in accordance with IS0 140-3, IS0 140-4, IS0 140-5, IS0 140-9 and IS0 140-10. The single-number quantities in accordance with this part of IS0 717 are intended for rating the airborne sound insulation and for simplifying the formulation of acoustical requirements in building codes. The required numerical values of the single-number quantities are specified according to varying needs. The single-number quantities are based on results of measurements in one-third-octave bands or octave bands. For laboratory measurements made in accordance with IS0 140-3, IS0 140-9 and IS0 140-10, singlenumber quantities should be calculated using onethird- octave bands only. The rating of results of measurements carried out over an enlarged frequency range is dealt with in annex B.

Acoustics - Rating of sound insulation in buildings and of building elements -- Part 1: Airborne sound insulation

GSO ISO 354:2013 声学 混响室中吸声的测量

Abstract ISO 354:2003 specifies a method of measuring the sound absorption coefficient of acoustical materials used as wall or ceiling treatments, or the equivalent sound absorption area of objects, such as furniture, persons or space absorbers, in a reverberation room. It is not intended to be used for measuring the absorption characteristics of weakly damped resonators. The results obtained can be used for comparison purposes and for design calculation with respect to room acoustics and noise control.

Acoustics -- Measurement of sound absorption in a reverberation room