91.120.20 建筑物声学、隔音 标准查询与下载

KS F 2870-2021 公寓浴室供水噪声的标准试验方法

Standard test method of water supply noise in apartment bathroom

ASTM E2984/E2984M-21 使用受控静水压对高压低碳锻造管道进行声发射检验的标准实施规程

1.1 This practice is no longer being updated but is being retained for historical value as it represents the only AE practice using hydrostatic testing in which the sensors are not in direct contact with the part. 1.2 In the preferred embodiment, this practice examines immersed low carbon, forged piping being immersed in a water tank with the acoustic sensors permanently mounted on the tank walls rather than temporarily on the part itself. The pipes are monitored while being internally loaded (stressed) by hydrostatic means up to 1000 bar. 1.3 This practice examines either an immersed pipe, or non-immersed pipe being stressed by internal hydrostatic means to create acoustic emissions when cracks are present. However, the non-immersed method is time consuming, requiring placement and removal of sensors for each pipe inspected, while the immersed method has sensors permanently mounted, providing consistent sensor coupling to the tank-eliminating reinstallation. The non-immersed method is not recommended for the specified reasons and only the immersed method will be discussed throughout the remainder of the practice. This is similar to pressure vessel testing described in Practice E569, but uses hydrostatic means not included in that standard. 1.4 This Acoustic Emission (AE) method addresses examination for monitoring low carbon, forged piping systems being internally loaded (stressed) by hydrostatic means up to 1000 bar [15,000 psi] while being immersed in a water bath to facilitate sensor coupling. 1.5 The basic functions of an AE monitoring system are to detect, locate, and classify emission sources. Other methods of nondestructive testing (NDT) may be used to further evaluate the significance of acoustic emission sources. 1.6 This practice can be used to replace visual methods, which are unreliable and have significant safety risks. 1.7 This practice describes procedures to install and monitor acoustic emission resulting from local anomalies stimulated by controlled hydrostatic pressure. 1.8 Other methods of nondestructive testing (NDT) may be used to further evaluate the significance of acoustic emission sources. 1.9 Units—The values stated in either SI units or inchpound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined. 1.10 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.11 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Acoustic Emission Examination of High Pressure, Low Carbon, Forged Piping using Controlled Hydrostatic Pressurization

PN-EN ISO 10140-4-2021-10 E 声学 建筑构件隔声的实验室测量 第4部分：测量程序和要求（ISO 10140-4:2021）

Acoustics -- Laboratory measurement of sound insulation of building elements -- Part 4: Measurement procedures and requirements (ISO 10140-4:2021)

PN-EN ISO 10140-5-2021-10 E 声学 建筑构件隔声的实验室测量 第5部分：测试设施和设备的要求（ISO 10140-5:2021）

Acoustics -- Laboratory measurement of sound insulation of building elements -- Part 5: Requirements for test facilities and equipment (ISO 10140-5:2021)

PN-EN ISO 10140-3-2021-10 E 声学 建筑构件隔声的实验室测量 第3部分：冲击隔声的测量（ISO 10140-3:2021）

Acoustics -- Laboratory measurement of sound insulation of building elements -- Part 3: Measurement of impact sound insulation (ISO 10140-3:2021)

PN-EN ISO 10140-2-2021-10 E 声学 建筑构件隔声的实验室测量 第2部分：空气隔声的测量（ISO 10140-2:2021）

Acoustics -- Laboratory measurement of sound insulation of building elements -- Part 2: Measurement of airborne sound insulation (ISO 10140-2:2021)

PN-EN ISO 10140-1-2021-10 E 声学 建筑构件隔声的实验室测量 第1部分：特定产品的应用规则（ISO 10140-1:2021）

Acoustics -- Laboratory measurement of sound insulation of building elements -- Part 1: Application rules for specific products (ISO 10140-1:2021)

Standardpakke - Musikoevelokaler-2021 标准包 – 音乐排练室和空间的声学质量标准

Standards Package – Acoustic quality criteria for music rehearsal rooms and spaces

KS F 2873-2021 地板冲击声弹性材料压缩率的测量方法

Measuring method of compressibility of resilient materials for floor impact sound

KS F ISO 10140-5-2021 隔音元件的实验室测量第5部分：测试设施和设备的要求

Laboratory measurement of sound insulation elements ― Part 5: Requirements for test facilities and equipment

KS F ISO 10140-3-2021 声学 ― 建筑构件隔音的实验室测量 ― 第3部分：冲击隔音的测量

Acoustics ― Laboratory measurement of sound insulation of building element ― Part 3: Measurement of impact sound insulation

KS F ISO 10140-4-2021 声学 ― 建筑构件隔音的实验室测量 ― 第4部分：测量程序和要求

Acoustics ― Laboratory measurement of sound insulation of building elements ― Part 4: Measurement procedures and requirements

KS F ISO 10140-1-2021 声学 ― 建筑构件隔音的实验室测量 ― 第1部分：特定产品的应用规则

Acoustics ― Laboratory measurement of sound insulation of building elements ― Part 1: Application rules for specific products

KS F ISO 17497-1-2021 声学表面声散射特性第1部分：混响室中随机入射散射系数的测量

Acoustics-Sound-scattering properties of surfaces ― Part 1: Measurement of the random-incidence scattering coefficient in a reverberation room

KS F ISO 10140-2-2021 声学 ― 建筑构件隔音的实验室测量 ― 第2部分：空气传播隔音的测量

Acoustics ― Laboratory measurement of sound insulation of building elements ― Part 2: Measurement of airborne sound insulation

KS F 2861-2021 建筑物和建筑构件的隔声测量-精密数据的测定、验证和应用

Measurement of sound insulation in buildings and of building elements－Determination, verification and application of precision data

DS/ISO 23591:2021 音乐排练室和空间的声学质量标准

Acoustic quality criteria for music rehearsal rooms and spaces

LST EN ISO 10052:2021 声学 空气传播和冲击隔音以及服务设备声音的现场测量 调查方法（ISO 10052:2021）

Acoustics - Field measurements of airborne and impact sound insulation and of service equipment sound - Survey method (ISO 10052:2021)

BS ISO 23591:2021 音乐排练室和空间的声学质量标准

Acoustic quality criteria for music rehearsal rooms and spaces

BS EN ISO 10140-3:2021 声学 建筑构件隔音的实验室测量 冲击隔声测量

Acoustics. Laboratory measurement of sound insulation of building elements. Measurement of impact sound insulation