91.120.25 地震和防振 标准查询与下载

ISO/TS 10811-2:2000 机械振动与冲击 具有敏感设备的建筑物的振动和冲击 第2部分:分类

This part of ISO/TS 10811 defines a method for the classification of shock and vibration in buildings from measurements in accordance with ISO/TS 10811-1. A classification system of environmental vibration conditions should serve as guidelines for designers, manufacturers and users of equipment sensitive to shock and vibration, and for building constructors. The types of shock and vibration considered are those transmitted from floors, tables, walls, ceilings or isolation systems into an equipment unit. They can be generated by the following: a) external sources, for example traffic (by road, rail or air), or building and construction activities such as blasting, piling and vibratory compaction; the vibration response to sonic booms and acoustical excitations is also included, as well as weather-induced vibration; b) equipment for indoor use, such as punch presses, forging hammers, rotary equipment (air compressors, air conditioner systems, etc.) and heavy equipment transported or operated inside a building; c) human activities in connection with the service or operation of the equipment, for example, people walking, especially on raised floors. The frequency range of interest is normally 2 Hz to 200 Hz. Normally the dominant frequencies are less than 100 Hz because they represent the response of the elements in the building. This part of ISO/TS 10811 deals only with vibration from a maximum amplitude point of view. The concept of vibration dose (for example as for estimation of fatigue life) is not treated.

Mechanical vibration and shock - Vibration and shock in buildings with sensitive equipment - Part 2: Classification

ASCE 4-2000 核心结构相关的地震安全分析

This standard is intended for use in the seismic analysis of all safety-related structures of nuclear facilities including, but not limited to, above and below ground structures, buried piping, above ground vertical tanks and structures with seismic isolation systems. Analysis of caisson and pile-supported foundations, unlined tunnels, and floating structures are not covered by this standard, However, nothing in this standard should be considered to preclude the use of these structures and structural elements.

Seismic Analysis of Safety-Related Nuclear Structures and Commentary

BS DD ENV 1998-4:1999 欧洲规程8:防地震结构的设计条例.贮仓、水箱和管道

Eurocode 8: Design provisions for earthquake resistance of structures. Silos, tanks and pipelines

SY/T 0318-1998 石油浮放设备隔震技术标准

本标准适用于设防烈度为6-9度地区浮放设备的隔震设计及安装，9度以上地区的浮放设备的隔震应作专门研究。

Standard for unfixed equipment isolation technique used in petroleum industry

DIN 4150-3:1999 建筑物振动.第3部分:对建筑物结构的影响

Vibration in buildings - Part 3: Effects on structures

ASCE 25-99-1999 地震开动机械气体关闭设备

This Standard provides minimum functionality requirements for earthquake-actuated automatic gas shutoff devices and systems (hereafter referred to as devices) meant to include mechanical devices consisting of a sensing means and a means to shut off the flow of gas.

Earthquake-Actuated Automatic Gas Shutoff Devices

GY 5060-1997 广播电影电视建筑抗震设防分类标准

Specifications for classifications of anti-seismic capabilities of broadcasting, film, and television buildings

BS DD ENV 1998-3:1997 欧洲法规8:建筑物抗地震的设计条例.塔楼、天线杆和烟囱

Eurocode 8: Design provisions for earthquake resistance of structures. Towers, masts and chimneys

ISO 4866:1990/Amd 2:1996 机械振动和冲击.建筑物的振动.振动测量及其对建筑物影响的评估指南

This International Standard establishes the basic principles for carrying out vibration measurement and processing data, with regard to evaluating vi- bration effects on buildings. It does not cover the source of excitation except insofar as the source dictates dynamic range, frequency or other param- eters. The evaluation of the effects of building vi- bration is primarily directed at structural response, and Includes appropriate analytlcal methods where the frequency, duration and amplitude can be de- nned. This international Standard only deals with the measurement of structural vibration and excludes the measurement of airborne sound pressure and other pressure fluctuations although response to such excitations is taken into consideration. A building, for the purposes of this International Standard, is defined as any above-ground structure, which man frequently inhabits. This excludes from consideration certain items of plant, for example columns, stacks, headframe, containments, even though they may receive intermittent visits from op- erating staff. The structural response of buildings depends upon the excitation; to this end this International Standard examines the methods of measurements as affected by the source, ¡.e. frequency, duration, and ampli- tudes as induced by any source, such as earth- quakes, explosions, wind effects, sonic booms, internal machinery, traffic, construction activities and others. NOTE 1 There are differencesbetween earthquakesand man-made vibrations which affect recording conditions. Earthquake-fault-rupture sources are large in size and much deeper than most man-made sources. They can cause damage at great distances, have much greater en- ergy flux and duration and a different pattern of wave propagation.Consequently, for the same parameter value (for example peak particle velocity), the effects on buildings are different.

Mechanical vibration and shock — Vibration of buildings — Guidelines for the measurement of vibrations and evaluation of their effects on buildings

SY 4081-1995 钢制球形储罐抗震鉴定技术标准

本标准适用于抗震设防烈度为6度至9度地区已投入运行的、设置在地表以上、支柱为正切式的球罐下部支承结构(支柱、拉杆、地脚螺栓，基础板等)的抗震鉴定和加固。

Standard for earthquake resistance evaluation of steel spherical tanks

ISO 4866:1990/Amd 1:1994 机械振动和冲击.建筑物的振动.振动测量及其对建筑物影响的评估指南.修改件1

Mechanical vibration and shock — Vibration of buildings — Guidelines for the measurement of vibrations and evaluation of their effects on buildings — Amendment 1

JIS A 1707:1994 住宅内设备振动的试验方法

Method of test for oscillation of equipment units for dwellings

SY 4063-1993 电气设施抗震鉴定技术标准

本技术标准适用于抗震设防烈度为6度至9度地区已投入运行的，电压为6kV至220kV的电气设施的抗震鉴定和加固。

Standard for Earthquake Resistance Evaluation of Electric Facilities

ISO/DTR 25741-2 抗震电梯和自动扶梯《编制报告》第2部分：简要比较和评述

Lifts and escalators subject to seismic conditions — Compilation report — Part 2: Abbreviated comparison and comments

ISO/DTR 25741-1 电梯和自动扶梯抗震条件下的“编制报告”第1部分：逐条比较

Lifts and escalators subject to seismic conditions — Compilation report — Part 1: Rule by rule comparison

ANSI S2.34-1984 旋转导纳性能和完全导纳基体的实验测定指南

This guide delineates the methods and procedures which may be used to determine the structural mobility properties, translational and rotational, of a system of points on a structure. This guide is to be used for guidance only, since the state of the art

Guide to the Experimental Determination of Rotational Mobility Properties and the Complete Mobility Matrix

CNS 10638-1983 浮式楼板用玻璃棉缓冲材料

本标准适用于浮式楼板建筑物 (其构造说明详细(1)) 以防止楼板冲击音及建筑设备等机械振动之玻璃棉缓冲材料 (以下简称玻璃棉缓冲材料)。注 (1)：浮式楼板构造系指结构体构造楼板及墙壁与浮式楼板之间，不使产生音桥 (Sound Bridge) 夹入缓冲材料，能够防止之构造。

Glass Wool Isolating Material for Floating Floors

CNS 10637-1983 浮式楼板用岩棉缓冲材料

本标准适用于浮式楼板建筑物 (其构造说明详细(1)) 以防止楼板冲击音及建筑设备等机械振动之岩棉缓冲材料 (以下简称岩棉缓冲材料)。注 (1)：浮式楼板构造系指结构体构造楼板及墙壁与浮式楼板之间，不使产生音桥 (Sound Bridge) 夹入缓冲材料，能够防止之构造。

Rock Wool Isolating Material for Floating Floors

CNS 10639-1983 水泥混和用聚合物扩散材料

本标准适用于聚合物水泥砂浆、聚合物水泥混凝土等使用聚合物水泥比 5% 以上之水泥混合用聚合物扩散材料 (以下简称扩散材料)。

Polymer Dispersions for Cement Nodifier

CNS 9054-1982 施工机械用仪表类之振动及冲击检验法

本标准规定施工机械用仪表类之振动及冲击检验法。

Testing Method of Vibration and Shock for Construction Machinery Gauges