91.120.30 防水 标准查询与下载

DIN 18195-4:2011 建筑物防水.第4部分:墙内楼板地面水分(毛细水,滞留水)和非累积渗透水的防水设计及施工

Water-proofing of buildings - Part 4: Waterproofing against ground moisture (Capillary water, retained water) and non-accumulating seepage water under floor slabs on walls, design and execution

KS F 4925-2011 涂覆水泥用液体防水材料

이 표준은 콘크리트 구조체 표면에 바르거나 또는 도포하여 방수층을 형성하는 목적으로 시멘트

Cement mortar mixed liquid waterproofing agent

BS 8533:2011 所发生防洪风险的评估和管理.操作规程

This British Standard gives recommendations and guidance on the appropriate assessment and management of flood risk where development is proposed in the UK. It is intended to provide developers, and decision makers (local authorities and regulators), with practical assistance for dealing with flood risk in and around their development. This British Standard does not cover the allocation of development sites by local authorities.

Assessing and managing flood risk in development. Code of practice

JG/T 333-2011 混凝土裂缝修补灌浆材料技术条件

本标准规定了混凝土裂缝修补灌浆材料的术语和定义、分类、要求与试验方法。 本标准适用于以聚合物基料和水硬性基料为主要原料，加入颜料和填料、助剂等其他组分制得的混凝土裂缝修补灌浆加固材料。

Technical specification of injection materials for repair of cracks in concrete

JG/T 316-2011 建筑防水维修用快速堵漏材料技术条件

本标准规定了建筑防水维修用快速堵漏材料的术语和定义、分类、要求和试验方法。 本标准适用于地下工程混凝土结构和实心砌体结构渗漏治理时采用的快速止水堵漏材料。

Technical requirements of instant leak-stoppage materials for remedial waterproofing

DIN 18195 Bb.1:2011 建筑物防水.补充件1:密封剂位置的示例

Water-proofing of buildings - Supplement 1: Examples of positioning of sealants

ANSI/ASHRAE 160a-2011 建筑物湿度设计分析标准

In this proposed addendum, the three required conditions for minimizing mold growth have been modified by retaining only the most significant condition while eliminating the other two. This change is proposed because (1) the condition being retained (Item a) is sufficient for determining the onset of mold growth, (2) one of the conditions being deleted (Item b) was erroneous, and (3) the other condition being removed (Item c) is not germane to determining mold growth. In addition, this change will make the standard easier to use.

Criteria for Moisture Design Analysis in Buildings

ASTM E1643-11 选择,设计,安装和检测混凝土板下与地面接触的隔汽层或粒状填料的标准操作规程

Vapor retarders provide a method of limiting water vapor transmission and capillary transport of water upward through concrete slabs on grade, which can adversely affect floor finishes and interior humidity levels. Adverse impacts include adhesion loss, warping, peeling, and unacceptable appearance of resilient flooring; deterioration of adhesives, ripping or separation of seams, and air bubbles or efflorescence beneath seamed, continuous flooring; damage to flat electrical cable systems, buckling of carpet and carpet tiles, offensive odors, growth of fungi, and undesired increases to interior humidity levels.1.1 This practice covers procedures for selecting, designing, installing, and inspecting flexible, prefabricated sheet membranes in contact with earth or granular fill used as vapor retarders under concrete slabs. 1.2 Conditions subject to frost and either heave or hydrostatic pressure, or both, are beyond the scope of this practice. Vapor retarders are not intended to provide a waterproofing function. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Selection, Design, Installation, and Inspection of Water Vapor Retarders Used in Contact with Earth or Granular Fill Under Concrete Slabs

JC/T 2041-2010 聚氨酯灌浆材料

本标准规定了聚氨酯灌浆材料的术语和定义、分类和标记、一般要求、技术要求、试验方法、检验规则、标志、包装、贮存与运输。 本标准适用于水利水电、建筑、交通、采矿等领域中混凝土裂缝修补、防渗堵漏、加固补强及基础帷幕防渗等工程所用的聚氨酯灌浆材料。

Polyurethane grouting materials

KS F 4938-2010 绿色屋顶系统用防水防根刺材料性能的试验方法

이 표준은 방수 및 방근 재료를 대상으로 식물을 식재하여 뿌리 침입을 평가하는 시험방법에

Test methods for the resistance to root penetration of waterproofing and root resistance materials for green roof system

KS F 4929-2010 金属陶瓷防水、防潮涂料

이 표준은 구조물의 방수ㆍ방식을 목적으로 콘크리트 및 강재(탱크류, 수문류, 관류, 밸브류

Ceramic-metal contain resin materials for waterproof and anticorrosion

KS F 4929-2010(2015) 陶瓷金属树脂防水防腐材料

Ceramic-metal contain resin materials for waterproof and anticorrosion

DIN 18195-9:2010 建筑物的防水性.第9部分:渗透、转换、连接和端接

Water-proofing of buildings - Part 9: Penetrations, transitions, connections and endings

ASTM E1643-10 用于接触混凝土板下土或颗粒填料的水蒸气缓凝剂的选择 设计 安装和检查的标准操作规程

Vapor retarders provide a method of limiting water vapor transmission and capillary transport of water upward through concrete slabs on grade, which can adversely affect floor finishes and interior humidity levels. Adverse impacts include adhesion loss, warping, peeling, and unacceptable appearance of resilient flooring; deterioration of adhesives, ripping or separation of seams, and air bubbles or efflorescence beneath seamed, continuous flooring; damage to flat electrical cable systems, buckling of carpet and carpet tiles, offensive odors, growth of fungi, and undesired increases to interior humidity levels.1.1 This practice covers procedures for selecting, designing, installing, and inspecting flexible, prefabricated sheet membranes in contact with earth or granular fill used as vapor retarders under concrete slabs. 1.2 Conditions subject to frost and either heave or hydrostatic pressure, or both, are beyond the scope of this practice. Vapor retarders are not intended to provide a waterproofing function. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Selection, Design, Installation, and Inspection of Water Vapor Retarders Used in Contact with Earth or Granular Fill Under Concrete Slabs

BS 8102:2009 防地面水的地下结构保护实用规范

This British Standard gives recommendations and provides guidance on methods of dealing with and preventing the entry of water from surrounding ground into a structure below ground level. It covers the use of: a) waterproofing barrier materials applied to the structure, b) structurally integral watertight construction; and c) drained cavity construction. It also covers the evaluation of groundwater conditions, risk assessment and options for drainage outside the structure. It applies to structures which extend below ground level and those on sloping sites. This British Standard does not give recommendations concerning the use of embedded heating in structures, floors and walls or for the special requirements in connection with the design and construction of cold stores.

Code of practice for protection of below ground structures against water from the ground

DS/EN ISO 15927-3:2009 建筑物的湿热性能 气候数据的计算和表示 第3部分：根据每小时风雨数据计算垂直表面的强降雨指数

To draft a standard specifying procedures for providing an estimate of the quantity of water likely to impact on a wall of any given orientation.

Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 3: Calculation of a driving rain index for vertical surfaces from hourly wind and rain data

DIN 18195-7:2009 建筑物防水.第7部分:抗内部压力水源的防水,尺寸规格和实施

Water-proofing of buildings - Part 7: Water-proofing against pressing water from the inside, dimensioning and execution

ANSI/ASHRAE 160-2009 建筑物中湿度控制设计分析用标准

This is the second public review of proposed new Standard 160. It specifies performance-based design criteria for predicting, mitigating, or reducing moisture damage to buildings depending upon climate, construction type, and HVAC system operation. It applies to all types of buildings, building components and materials. This second public review draft makes independent substantive changes to the first public review draft in response to comments received.

Criteria for Moisture-Control Design Analysis in Buildings

KS F 4918-2008 硅酸基粉末涂覆防水材料

이 표준은 습윤 환경1) 조건하의 콘크리트 구조물의 방수 또는 보수 공사를 위하여 규산질

Cement mixed siliceous power waterproof coatings

KS F 9004-2008 防水层保护混凝土接缝施工标准

이 표준은 건축물의 옥상, 개방 복도, 베란다, 입구, 주차장 등에 시공하는 멤브레인 방수

Standard specification of performed expansion joint filler of slab for protection of waterproofing layer