91.140.01 建筑物中的设施综合 标准查询与下载

GOST R 54448-2011 非家用单头燃烧器架空式燃气辐射管加热器.第1部分:安全性

Single burner gas-fired overhead radiant tube heaters for non-domestic use. Part 1. Safety requirements

ASME B31.9-2011 建筑结构用管

This document has rules for the piping in industrial, institutional, commercial, and public buildings, and multi-unit residences, which does not require the range of sizes, pressures, and temperatures covered in B31.1. This Code prescribes requirements for the design, materials, fabrication, installation, inspection, examination, and testing of piping systems for building services. It includes piping systems in the building or within the property limits.

Building Services Piping

VDI 3817-2010 列出的历史建筑中的建筑服务

The guideline shows how to reconcile the protection of heritage buildings in their original state and the owner's interest in a fully usable building with modern services. It is a question of installing and operating modern advanced technology in heritage buildings while still preserving the historical structure and cultural value of the building. This problem is especially prominent when putting listed buildings to new uses and improving convenience in historical buildings through technical measures in the following trades: sanitary facilities and media supply, heating and ventilation, electrical technology and lighting, security, conveyance, fire and lightning protection and building automation. The guideline contains practical guidance, recommendations, advice, check lists and evaluation criteria for these areas. It is intended for planners and executors of such construction and conversion works, at owners, users and managers of heritage buildings and at the responsible experts in heritage preservation authorities.

Building services in listed and historical buildings

ANSI/ASHRAE 94.3-2010 基于热力性能的有源敏感型热能设备测试方法

The purpose of this standard is to provide a standard procedure for determining the thermal performance of sensible thermal energy storage devices used in heating, air-conditioning, and service hot water systems.

Method of Testing Active Sensible Thermal Energy Devices Based on Thermal Performance

ANSI/NFPA 900-2010 建筑物能源法规

1.1 Scope. These regulations shall control the minimum energy-efficient requirements for the following: (1) The design, construction, reconstruction, alteration, repair, demolition, removal, inspection, issuance, and revocation of permits or licenses, installation of equipment related to energy conservation in all buildings and structures and parts thereof (2) The rehabilitation and maintenance of construction related to energy efficiency in existing buildings (3) The standards or requirements for materials to be used in connection therewith

Building Energy Code

DB13/T 1165-2009 低温热水地面供暖系统售后服务规范

本标准规定了低阻热水地面供暖系统(以下简称地面供暖系统〉售后服务的术语与定义、基本原则和基本要求。本标准适用于公共建筑、民用建筑和家庭装修的地面供暖系统的售后服务。

Specifications for after-sales service of low temperature hot water floor heating system

DIN V 18599-100:2009 建筑物能效.加热,冷却,通风,家用热水和照明用净能,最终和初始能量需求的计算.第100部分:DIN V 18599-1至DIN V 18599-10的修改件

Energy efficiency of buildings - Calculation of the net, final and primary energy demand for heating, cooling, ventilation, domestic hot water and lighting - Part 100: Amendments for DIN V 18599-1 to DIN V 18599-10

VDI 6004 Blatt 3-2009 保护建筑服务 故意破坏或破坏财产

The present guideline applies to the planning, erection, operation and maintenance of building services facilities. These may be found in or on a) buildings or land which may properly be visited by the general public in addition to the individuals who work there, or b) in buildings or facilities specifically built or installed for the use of visitors. The purpose of this guideline is to make recommendations derived from collected experience as to how building service installations can be planned, built and operated so as to provide far-reaching protection against wilful or unintentional damage to or destruction of technical facilities and components.

Protection for building services - Vandalism or destruction of property

ANSI/ASSE 5000Series-2009 交叉连接控制专业资格标准

Cross Connection Control Professional Qualifications Standard

BS EN 15251:2007 建筑物选址室内空气质量、热环境、照明和声学能量性能评估和设计用室内环境输入参数

Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics

VDI 6026 Blatt 1-2008 建筑服务文件 规划、执行和审查文件的内容和格式

This guideline describes the requirements, in terms of contents and format, to be met by the documents that are to be drafted in the course of the processing of a BS project (planning, execution or operation of a BS system). The required contents and format of the documents to be drafted in the course of project processing for the relevant parties involved (building owners/orderers, architects, specialist planners, contractors, operators, etc.) are pointed out. Rather than introducing new terminology in the context of the drafting of documents, this guideline makes use of the existing terms, already used particularly in the VOB or the HOAI, although these terms are mostly not defined in greater detail. This guideline does not stipulate independent, new obligations to draft the documents. However, this guideline does not merely describe the information content and format of the documents in each planning or execution phase, i. e. from a vertical perspective, but it also shows the interfaces between the respective BS trades from a horizontal perspective. The following BS trades are considered by this guideline: - Sewage, water and gas systems - Heat supply systems - Ventilating and air-conditioning systems - Cooling systems - Power systems - Telecommunications and IT systems - Conveying systems - Building automation and control systems (BACS). The planning including the associated description shall be checked for compliance with the respective functional planning specifications, approved and accepted by the orderer at the end of each planning phase.

Documentation in the building services - Contents and format of planning, execution and review documents

DIN 18012:2008 家用连接设施.规划原则

House service connections facilities - Pinciples for planning

ASME B31.9-2008 建筑设备管道

This CodeSection has rules for the piping in industrial, institutional,commercial, and public buildings, and multi-unitresidences, which does not require the range of sizes,pressures, and temperatures covered in B31.1. This Codeprescribes requirements for the design, materials, fabrication,installation, inspection, examination, and testingof piping systems for building services. It includes pipingsystems in the building or within the property limits.

Building Services Piping

ANSI/ICC 500-2008 暴风遮盖物的设计、建造和性能标准

The objective of this standard is to provide technical design and performance criteria that will facilitate and promote the design, construction, and installation of safe, reliable, and economical storm shelters to protect the public. It is intended that this Standard be used by design professionals, storm shelter designers, manufacturers, and constructors, building officials, emergency management personnel, and government officials to ensure that storm shelters provide a consistently high level of protection to the sheltered public

Standard on Design, Construction and Performance of Storm Shelters

SBJ 14-2007 氢氯氟烃、氢氟烃类制冷系统安装工程施工及验收规范

Specifications for construction and acceptance of HCFC and HFC refrigeration system installation projects

KS F 2290-2007(2017) 配管单元的模块化统筹尺寸住宅

Modular co-ordinating sizes of piping unit for dwellings

KS F 2290-2007(2022) 住宅管道装置的模块化协调尺寸

Modular co-ordinating sizes of piping unit for dwellings

LST EN 15251-2007 用于设计和评估建筑物能源性能的室内环境输入参数，涉及室内空气质量、热环境、照明和声学

Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics

DIN EN 15217:2007 建筑物能量性能.表示建筑物能量性能和能量认证的方法

This European Standard specifies: a) overall indicators to express the energy performance of whole buildings, including heating, ventilation, air conditioning, domestic hot water and lighting systems.This includes different possible indicators; b) ways to express energy requirements for the design of new buildings or renovation of existing buildings; c) procedures to define referece values; d) ways to design a procedure for building energy certification. This European Standard provides different options at defferent levels. When this European Standard is used to set up national or regional methods for expressing energy performance and/or for energy certification of buildings, the choices between the options is not made by the individual user, but by authorized mational or regional bodies.

Energy performance of buildings - Methods for expressing energy performance and for energy certification of buildings English version of DIN EN 15217:2007-09

CECS 224-2007 节能型双向集热卫浴间应用技术规程

本规程适用于新建、扩建和改建的民用住宅卫浴间及其他建筑卫浴设施的设计、施工及验收。

Technical specification for application of energy-saving bathroom with two-way heat collecting technology