91.140.01 建筑物中的设施综合 标准查询与下载

NF E51-762:2007 建筑物选址室内空气质量、热环境、照明和声学的设计和能量性能评估用室内环境输入参数

Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics.

DIN EN 15251:2007 建筑物选址室内空气质量、热环境、照明和声学设计和能量性能评估用室内环境输入参数

- This European Standard specifies the indoor environmental parameters which have an impact on the energy performance of buildings. - The standard specifies how to estabilsh in door environmental input parameters for building system design and energy performance calculations. - The standard specifies methods for long term evalution of the indoor environment obtained as a result of calculations or measurements. - The standard specifies criteria for measurements which can be used of required to measure compliance gy inspection. - The standard identifies parameters to be sued by menitoring and displaying the indoor environment in existing buildings. - This standard is applicable mainly in non-dustrial buildings where the creteria for indoor environment are set by human occupancy and where the porduction or process does not have a major impact on indooor environment. The standard is thus applicable to the following building types; single family houses, apartment buildings, offices, educational buildings, hospitals, hotels and restaurants, sports facilities, wholesale and retail trade service buildings. - The standard specifies how different categories of criteria for the indoor environment can be used. But does not require certain criteria to be used. This is up to national regulations or individual project specifications. - The recommended criteria in this standard can also be used in national calculation methods, which may be different to the methodsreferred to here. - The standard does not prescribe design methods,but give input parameters to the disign of buildings, heating, cooling, ventilation and lighting systems. - The standard does not include criteria for local discomfort factors like draught, radiant temperature asymmetry, vertical air temperature differences and floor surface temperatures.

Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics English version of DIN EN 15251:2007-08

HG/T 20572-2007 化工企业给排水设计施工图内容深度统一规定

本规定动作的有关内容和深度，适用于传统设计体制。

Rules of content depth for design of construction drawing of water supply and drainage in chemical industry

EN 15251:2007 建筑物选址室内空气质量、热环境、照明和声学的能量性能设计和评估用室内环境输入参数

This European Standard specifies the indoor environmental parameters which have an impact on the energy performance of buildings. • The standard specifies how to establish indoor environmental input parameters for building system design and energy performance calculations. • The standard specifies methods for long term evaluation of the indoor environment obtained as a result of calculations or measurements. • The standard specifies criteria for measurements which can be used if required to measure compliance by inspection. • The standard identifies parameters to be used by monitoring and displaying the indoor environment in existing buildings. • This standard is applicable mainly in non-industrial buildings where the criteria for indoor environment are set by human occupancy and where the production or process does not have a major impact on indoor environment. The standard is thus applicable to the following building types: single family houses, apartment buildings, offices, educational buildings, hospitals, hotels and restaurants, sports facilities, wholesale and retail trade service buildings. • The standard specifies how different categories of criteria for the indoor environment can be used. But does not require certain criteria to be used. This is up to national regulations or individual project specifications. • The recommended criteria in this standard can also be used in national calculation methods, which may be different to the methods referred to here. • The standard does not prescribe design methods, but give input parameters to the design of buildings, heating, cooling, ventilation and lighting systems. • The standard does not include criteria for local discomfort factors like draught, radiant temperature asymmetry, vertical air temperature differences and floor surface temperatures.

Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics

CJ/T 246-2007 城镇供热预制直埋蒸汽保温管管路附件技术条件

本标准规定了城镇供热预制直埋蒸汽保温管管路附件（以下简称管路附件）的术语和定义、基本组成、要求、试验方法、检验规则及标志、运输、贮存。 本标准适用于输送蒸汽温度不大于350 ℃、工作压力不大于1.6MPa管路附件的制造与检验。输送热水温度不小于150 ℃、工作压力不大于2.5MPa管路附件的制造与检验可参照本标准执行。

Technical specification of preformed directly buried steam insulating pipeline accessories for municipal heat-supply

VDI 3807 Blatt 1-2007 建筑物能源和水消耗的特征值 基础

Guideline VDI 3807 applies to the determination and application of energy and water consumption characteristics for buildings and real properties to which final energy (heating energy including district heat, electricity) and water are supplied. Characteristic consumption values are valid for entire buildings and are determined from measured consumption values subject to the effects of various quantities (such as thermal insulation of the building, utilisation ratio of the heating system, use of the building, internal heat sources and drains, passive use of solar energy, behaviour of the user). Partial characteristics can be derived and/or calculated from measured values. In doing so, the information given in Parts 3, 4 and 5 have to be observed. When comparing characteristic values, building- and user-specific aspects must be considered.

Characteristic value of energy and water consumption in buildings - Fundamentals

DIN V 18599-1:2007 建筑物能效.计算加热、冷却、通风、家用热水和照明用净能、最终和初始能量.第1部分:通用平衡程序、术语、定义、区域划分和评估方法

The DIN V 18599 series of prestandards provides a methodology for calculating the overall energy balance of buildings. The described algorithm is applicable to the calculation of energy balances for: -- residential buildings and non-residential buildings; -- planned or new building construction and existing buildings. The procedure for calculating the balances is suitable for: -- balancing the energy use of buildings with partially pre-determined boundary conditions; -- balancing the energy use of buildings with freely-selectable boundary conditions from the general engineering aspect, e.g. with the objective of achieving a good comparison between calculated and measured energy ratings. The balance calculations take into account the energy use for: -- heating, -- ventilation, -- air conditioning (including cooling and humidification), -- heating the domestic hot water supply, and -- lighting of buildings, including the additional electric power input (auxiliary energy) which is directly related to the energy supply. This document provides an overview of the procedures for calculating the energy need, delivered energy and primary energy for heating, cooling, lighting and the domestic hot water supply of buildings. The central balance equations are described in this part. Furthermore, it explains the general terms which apply for all parts of the DIN V 18599 series. The general balance calculation method is outlined together with separate information on calculations for residential buildings and non-residential buildings. The procedure for defining zones of buildings is explained. In the Annex, factors for assessing the environmental effects of the energy use (primary energy factors) are listed. Figure 2 shows the scope of the present document as a diagram. For the reader's orientation, all other parts of the DIN V 18599 series contain an illustration similar to Figure 2 as shown here and in which the respective energy components dealt with are shown in colour.

Energy efficiency of buildings - Calculation of the net, final and primary energy demand for heating, cooling, ventilation, domestic hot water and lighting - Part 1: General balancing procedures, terms and definitions, zoning and evaluation of energy sour

DIN V 18599-10:2007 建筑物能效.计算加热、冷却、通风、家用热水和照明用净能、最终和初始能量.第10部分:使用边界条件和环境数据

The DIN V 18599 series of prestandards provides a methodology for calculating the overall energy balance of buildings. The described algorithm is applicable to the calculation of energy balances for: -- residential buildings and non-residential buildings; -- planned or new building construction and existing buildings. The procedure for calculating the balances is suitable for: -- balancing the energy use of buildings with partially pre-determined boundary conditions; -- balancing the energy use of buildings with freely-selectable boundary conditions from the general engineering aspect, e.g. with the objective of achieving a good comparison between calculated and measured energy ratings. The balance calculations take into account the energy use for: -- heating -- ventilation, -- air conditioning (including cooling and humidification), -- heating the domestic hot water supply, and -- lighting of buildings, including the additional electric power input (auxiliary energy) which is directly related to the energy supply. This document specifies the boundary conditions for residential and non-residential buildings and provides reference climatic data for Germany. Figure 2 shows the scope of the present document as a diagram. For the reader's orientation, all other parts of the DIN V 18599 series of prestandards contain an illustration similar to Figure 2 as shown here, and in which the respective energy components dealt with are shown in colour.

Energy efficiency of buildings - Calculation of the net, final and primary energy demand for heating, cooling, ventilation, domestic hot water and lighting - Part 10: Boundary conditions of use, climatic data

JG/T 195-2007 散热器恒温控制阀

本标准规定了散热器恒温控制阀（以下简称恒温阀）的术语和定义、结构分类与型号、要求、试验方法、检测规则以及标志、包装、运输和贮存。 本标准适用于民用建筑供暖系统中，通过自力式动作控制流经采暖散热器的热水（120℃以下）流量的恒温阀，不包括电动等其他形式的控温阀门。

Thermostatic radiator valve

KS F 2284-2006 住宅设备燃烧安全试验方法

METHOD OF SAFETY TEST FOR COMBUSTION OF EQUIPMENT UNITS FOR DWELLINGS

VDI 2050 Blatt 1-2006 技术中心的要求 计划和执行的技术基础

It gives guidance on calculating the space requirement for technique centres, the structural arrangement of technique centres in a building. Although space for service shafts is not considered in this guideline, they certainly must not be ignored. The areas needed for service shafts will depend on the type of services that are installed, the number of main installation points and the layout of the technique centres and in the case of ventilation and air conditioning on the position of the supply air and exhaust air openings. Service shafts for the sanitary, heating, chilling and the electrical services occupy a smaller proportion of shaft space than that required for ventilation and air conditioning installations. A guideline figure of 1% to 3% of the gross floor area can be used for the space needed for service shafts.

Requirements at technique centers - Technical bases for planning and execution

NY/T 1001-2006 民用省柴节煤灶、炉、炕技术条件

本标准规定了民用炊事省柴灶、节煤炉和炕连灶的技术要求、检验规则及运行管理规范。 本标准适用于以柴草（薪柴、秸秆、树叶等）、畜粪和散煤为燃料的民用省柴灶、节煤炉和炕连灶。

Technical specification of domestic improved stoves and kangs for firewood and coal

CJ/T 217-2005 给水管道复合式高速进排气阀

本标准规定了给水管道复合式高速进排气阀(以下简称进排气阀)的结构型式、产品的型号、要求、检验方法、检验规则、标志、产品说明书和包装、贮运等。 本标准适用于公称通径DN50mm～300mm、公称压力不大于1.6MPa、水温0℃～65℃，给水管道用进排气阀。

Compound quick air inbreathe-release valve for water supply pipeline

CJ/T 216-2005 给排水用软密封闸阀

本标准规定了橡胶软密封闸阀(以下简称闸阀)的结构型式、要求、检验方法、检验规则、标志、包装、运输和贮存等基本要求。 本标准适用于公称压力PN0.6MPa～2.5MPa，公称通径DN50mm～800mm，球墨铸铁材质，城镇给排水用闸阀的设计、制造和验收。

Resilient-seated gate valves for water supply and drainage service

CJ/T 219-2005 水力控制阀

本标准规定了水力控制阀结构型式与型号、技术要求、试验方法、检验规则、标志、包装、运输、贮存等基本要求。 本标准适用于公称压力PN≤2.5MPa，公称通径DN50mm～800mm，介质温度≤80℃，工作介质为清水的生产、生活及消防等给水系统用水力控制阀。

Hydraulic control valve

CJJ 105-2005 城镇供热管网结构设计规范

本规范适用于城镇供热管网工程中下列结构的设计： 1 放坡开挖或护壁施工的明挖管沟及检查室； 2 独立式管道支架，包括固定支架、导向支架及活动支架。

Code for structural design of heating pipelines in city and town

CECS 186-2005 多边形稀油密封储气柜工程施工质量验收规程

本规程主要适用于城市煤气和冶金行业多边形储气柜本体工程的施工质量验收。其他行业同型储气柜的施工质量验收可参照采用。

Specification for construction quality acceptance of polygon oil seal gasholder

CJJ 104-2005 城镇供热直埋蒸汽管道技术规程

本规程适用于工作压力小于或等于1.6MPa，温度小于或等于350℃，直接埋地敷设的保温蒸汽管道的设计、施工、验收及运行维护。不适用于抽真空保温结构的直埋蒸汽管道。

Technical specification for directly buried steam heating pipeline in city

DIN V 18599-1:2005 建筑物能效.加热、冷却、通风、家用热水和照明用净能量、最终和最初能量需求的计算.第1部分:能量源的一般平衡过程、术语和定义、分区和评定

Energy efficiency of buildings - Calculation of the net, final and primary energy demand for heating, cooling, ventilation, domestic hot water and lighting - Part 1: General balancing procedures, terms and definitions, zoning and evaluation of energy sour

CJ/T 212-2005 聚合物基复合材料水箅

本标准规定了聚合物基复合材料水箅的分类、承载等级、技术要求、试验方法、检验规则及标志等。 本标准适用于安装在各种路面上的各个部位(包括道路、公路两边及中间，绿地，厂房车间的室内地面等)的聚合物基复合材料水箅。

Water grate made of polymer matrix composites