91.140.30 通风和空调 标准查询与下载

LST EN 1751-2014 建筑物通风. 空气终端设备. 减振器和阀的空气动力学试验

Ventilation for buildings - Air terminal devices - Aerodynamic testing of damper and valves

BS EN ISO 10121-1:2014 评估整体通风用气相空气净化媒介和装置性能的试验方法. 气相空气净化媒介

Test method for assessing the performance of gas-phase air cleaning media and devices for general ventilation. Gas-phase air cleaning media

JG/T 31-2014 圆形新风空调机组

Round fresh air air conditioning unit

JG/T 431-2014 圆形新风空调机组

本标准规定了圆形新风空调机组的术语和定义、分类和标记、材料、要求、试验方法、检验规则、标志、包装、运输和贮存。本标准适用于冷媒为冷水、热媒为热水或蒸汽,以各功能段为组合单元,能够完成输送、加热、冷却、加湿、除湿、过滤、消声、热回收等多种功能的圆形新风空调机组。带回风混合段的圆形空调机组、断面接近圆形的空调机组、乙二醇等冷媒圆形空调机组可参照使用。

Cylindrical fresh air handling units

ISO 10121-1:2014 评估整体通风用气相空气净化媒介和装置性能的试验方法. 第1部分: 气相空气净化媒介

This part of ISO 10121 aims to provide an objective laboratory test method, a suggested apparatus, normative test sections and normative tests for evaluation of three different solid gas-phase air cleaning media (GPACM) or GPACM configurations for use in gas-phase air cleaning devices intended for general filtration applications. This part of ISO 10121 is specifically intended for challenge testing and not for general material evaluation or pore system characterization. The three different types of GPACM identified in this part of ISO 10121 are GPACM-LF (particles of different shape and size intended for e.g. Loose Fill applications), GPACM-FL (FLat sheet fabric intended for e.g. flat one layer, pleated or bag type devices) and GPACM-TS (three dimensional structures that are many times thicker than flat sheet and e.g. used as finished elements in a device). The tests are conducted in an air stream and the GPACM configurations are challenged with test gases under steady-state conditions. Since elevated gas challenge concentrations (relative to general ventilation applications) are used, test data should be used to compare GPACM within the same configuration and not for the purpose of predicting performance in a real situation. It is also not implied that different GPACM configurations can be directly compared. The primary intention is to be able to compare like GPACM configurations to like, not between GPACM configurations. Testing of complete devices is described in ISO 10121-2. To ensure objectivity for test equipment suppliers, no specific design of the test apparatus is defined: an example is illustrated in Annex C (informative). Instead normative demands for media sample holder design, apparatus properties and validation tests are specified. The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. general ventilation — Part 2: Gas-phase air cleaning devices (GPACD) ASTM D2854, Standard Test Method for Apparent Density of Activated Carbon 3 Terms and definitions For the purposes of this document, the terms and definitions given in ISO 29464 and the following apply. 3.1 absorption transport and dissolution of a sorbate into an absorbent  Licensee=University of Alberta/5966844001, User=sharabiani, shahramfs 1

Test method for assessing the performance of gas-phase air cleaning media and devices for general ventilation - Part 1: Gas-phase air cleaning media

EN ISO 10121-1:2014 评估整体通风用气相空气净化媒介和装置性能的试验方法.第1部分:气相空气净化媒介(ISO 10121-1:2014)

Dieser Teil der ISO 10121 zielt darauf ab, ein objektives Laborprufverfahren, eine vorgeschlagene Prufeinrichtung, normative Prufabschnitte und normative Prufungen fur die Bewertung von drei verschiedenen festen Medien zur Reinigung der Gasphase (GPACM) oder GPACM-Zusammensetzungen fur die Verwendung in Einrichtungen zur Reinigung der Gasphase fur die Anwendung in der allgemeinen Filtration bereitzustellen. Dieser Teil der ISO 10121 ist insbesondere fur die Eignungsprufung und nicht fur die allgemeine Materialbewertung oder Charakterisierung des Porensystems vorgesehen. Die in diesem Teil der ISO 10121 festgelegten drei verschiedenen Typen sind GPACM-LF (Partikel verschiedener Formen und Grosen, z. B. fur lose Fullanwendungen), GPACM-FL (flache Gewebelagen, z. B. fur flache Einschichteinrichtungen, Falteinrichtungen oder Tascheneinrichtungen) und GPACM-TS (dreidimensionale Strukturen, die um ein Vielfaches dicker als flache Lagen sind und z. B. als Fertigelemente in einer Einrichtung verwendet werden). Die Prufungen werden in einem Luftstrom durchgefuhrt und die GPACM-Zusammensetzungen werden bei gleichbleibenden Bedingungen mit Prufgasen gepruft. Da (in Bezug auf die allgemeine Luftung) erhohte Prufgaskonzentrationen eingesetzt werden, sollten Prufdaten verwendet werden, um GPACM innerhalb der gleichen Zusammensetzung zu vergleichen und nicht zum Zweck der Vorhersage der Leistung in realen Situationen. Es wird auch nicht ausgesagt, dass verschiedene GPACM- Zusammensetzungen direkt miteinander verglichen werden konnen. Das primare Ziel ist der Vergleich gleicher GPACM-Zusammensetzungen und nicht verschiedener GPACM-Zusammensetzungen. Die Prufung von gesamten Einrichtungen ist in ISO 10121-2 beschrieben. Damit die Sachlichkeit fur Lieferanten von Prufeinrichtungen sichergestellt ist, wird keine bestimmte konstruktive Ausfuhrung der Prufeinrichtung definiert; ein Beispiel ist im informativen Anhang C gezeigt. Anstelle von normativen Anforderungen an die konstruktive A

Test method for assessing the performance of gas-phase air cleaning media and devices for general ventilation - Part 1: Gasphase air cleaning media

VDI 6022 Blatt 4.1-2014 通风和室内空气质量 卫生检查、卫生检查和室内空气质量评估人员的资格 A 类和 B 类能力证书

This standard complements the standard VDI 6022 Part 4 with a simplified method for the declaration of the qualification in categories A and B according to VDI 6022. The stanard regulates the entry requirements and the issueing of the "air hygiene" VDI pass introduced with VDI 6022 Part 4.

Ventilation and indoor-air quality - Qualification of personnel for hygiene checkings, hygiene inspections, and assessment of indoor air quality - Certificate of competence in Category A and Category B

BS EN 1751:2014 建筑物通风. 空气终端设备. 减振器和阀的空气动力学试验

Ventilation for buildings. Air terminal devices. Aerodynamic testing of damper and valves

UL 484-2014 房间空调器

UL Standard for Safety Room Air Conditioners (Ninth Edition; Reprint with Revisions Through and Including September 6@ 2018)

EN 1751:2014 建筑物通风.气路终端设备.阀与阀门的气动试验

This European Standard specifies methods for the testing and rating of dampers and valves used in air distribution systems with pressure differences up to 2000 Pa. The tests incorporated in this European Standard are: a) leakage past a closed damper or valve (for classification see Annex C); b) casing leakage (for classification see Annex C); c) flow rate/pressure requirement characteristics; d) torque: (see Annex A); e) thermal transmittance: (see Annex B). The acoustic testing of dampers and valves is not included in this European Standard. The tests specified above apply to the following: f) measurement of leakage past a closed damper or valve; g) measurement of casing leakage; h) determination of flow rate and pressure requirements; i) measurement of torque characteristics (see Annex A); j) measurement of thermal transfer characteristics to determine insulation properties (see Annex B). NOTE Certain aspects of the dynamic performance of dampers or valves are dependent upon the air distribution system to which they are connected and are, therefore, difficult to measure in isolation. Such considerations have led to the omission of these aspects of the dynamic performance measurements from this European Standard. Also, in common with other air distribution components, the results from tests carried out in accordance with this European Standard may not be directly applicable if the damper or valve is situated in an area of non-uniform flow.

Ventilation for buildings - Air terminal devices - Aerodynamic testing of damper and valves

GOST R EN 779-2014 一般通风用微粒空气过滤器. 过滤性能的测定

Particulate air filters for general ventilation. Determination of the filtration performance

GOST R EN 1822-5-2014 "ERA, HEPA和ULPA高效空气过滤器. 第5部分. 过滤器滤芯效率的测定"

High efficiency air filters EPA, HEPA and ULPA. Part 5. Determining the efficiency of filter elements

JB/T 9062-2013 采暖通风与空气调节设备 涂装要求

本标准规定了采暖通风与空气调节设备(以下简称“设备”)涂装的术语和定义、涂装方式、要求、试验和检验规则。本标准适用于采暖通风与空气调节设备的涂装。本标准不适用于散热器、除尘设备的涂装。

The painting requirements for heating ventilation and air-conditioning equipments

KS B 6392-2013 测试空气扩散器空气动力学性能的实验室方法

Laboratory methods of testing air diffusers for aerodynamic performance

VDI 3810 Blatt 4-2013 建筑物和建筑物装置的操作和维护 通风和空调装置

The guideline applies to the operation and maintenance of VAC installations and VAC equipment (centralised as well as decentralised). It targets in particular cost groups 430 through 434 and 439 as per DIN 276. It does not apply to household equipment as specified in the German Law on the Safety of Equipment and Products. The guideline offers the owner and operator of installations recommendations for the safe, specified and economic operation of VAC installations. It specifies the basis of maintenance and describes the maintenance activities and defines terms which, together with the terms defined in DIN EN 13306, are necessary for understanding the intera

Operating and maintenance of buildings and building installations - Ventilating and air-conditioning installations

VDI 6022 Blatt 6-2013 通风和室内空气质量 分散式设备的空气加湿 规划、建设、运营、维护

This standard applies to standalone units for the intended and local humidification of air as well as for decorative water-carrying devices (such as fountains, cascades and water walls) which affect the air humidity in a room. Units originally intended for residential use, which are used in workplaces are also subject to the requirements specified by this standard. The standard factors the particular hazards incuring from such units arising from, e.g., the supply of unfiltered microbiologically contaminated breathing air and insufficient maintenance.

Ventilation and indoor-air quality - Air humidification on decentralised devices - Planning, construction, operation, maintenance

KS I ISO 5221-2013 空气分布和空气扩散 空气处理管道中空气流量测量方法规则

Air distribution and air diffusion－Rules to methods of measuring air flow rate in an air handling duct

DIN EN ISO 10121-2:2013 全面通风用气相空气清洁剂和装置性能评估的试验方法.第2部分:气相空气清洁装置(GPACD)(ISO 10121-2-2013).德文版本EN ISO 10121-2-2013

Test methods for assessing the performance of gas-phase air cleaning media and devices for general ventilation - Part 2: Gas-phase air cleaning devices (GPACD) (ISO 10121-2:2013); German version EN ISO 10121-2:2013

LST EN 13142-2013 建筑物通风. 住宅用通风组件/产品. 要求和可选的性能特征

Ventilation for buildings - Components/products for residential ventilation - Required and optional performance characteristics

UL 181-2013 工厂制通风管和通风管接头

Factory-made air ducts and air connectors