91.140.50 供电系统 标准查询与下载

IEC 62055-41:2014 电量测量.付费系统.第41部分:标准传输规范(STS).单程令牌载波系统的应用层协议

This part of IEC 62055 specifies the application layer protocol of the STS for transferring units of credit and other management information from a point of sale (POS) system to an STScompliant payment meter in a one-way token carrier system. It is primarily intended for application with electricity payment meters without a tariff employing energy-based tokens@ but may also have application with currency-based token systems and for services other than electricity. It specifies: ? a POS to token carrier interface structured with an application layer protocol and a physical layer protocol using the OSI model as reference; ? tokens for the application layer protocol to transfer the various messages from the POS to the payment meter; ? security functions and processes in the application layer protocol such as the Standard Transfer Algorithm and the Data Encryption Algorithm@ including the generation and distribution of the associated cryptographic keys; ? security functions and processes in the application layer protocol at the payment meter such as decryption algorithms@ token authentication@ validation and cancellation; ? specific requirements for the meter application process in response to tokens received; ? a scheme for dealing with payment meter functionality in the meter application process and associated companion specifications; ? generic requirements for an STS-compliant key management system; ? guidelines for a key management system; ?entities and identifiers used in an STS system; ?code of practice for the management of TID roll-over key changes in association with the revised set of base dates; ? code of practice and maintenance support services from the STS Association. It is intended for use by manufacturers of payment meters that have to accept tokens that comply with the STS and also by manufacturers of POS systems that have to produce STScompliant tokens and is to be read in conjunction with IEC 62055-5x series. STS-compliant products are required to comply with selective parts of this International Standard only@ which is the subject of the purchase contract (see also Clause C.11). NOTE Although developed for payment systems for electricity@ the standard also makes provision for tokens used in other utility services@ such as water and gas.

Electricity metering - Payment sytems - Part 41: Standard transfer specification (STS) - Application layer protocol for one-way token carrier systems

DIN 18015-4:2014 居民楼内的电气装置. 第4部分: 家用和建筑电子系统

Electrical installations in residential buildings - Part 4: Home and Building Electronic System

GOST 32966-2014 建筑的电气装置. 压带

Electrical installations of buildings. Voltage bands

SNI 0225 AMD 2-2014 2011 年电气安装通用要求（PUIL 2011） 修正案 2

Persyaratan Umum Instalasi Listrik 2011 (PUIL 2011) - Amandemen 2

SNI 0225 AMD 3-2014 2011 年电气安装通用要求（PUIL 2011） 修正案 3

Persyaratan Umum Instalasi Listrik 2011 (PUIL 2011) - Amandemen 3

GOST IEC 62052-21-2014 交流电测量设备. 通用要求, 试验和试验条件. 第21部分. 收费和负载控制设备"

Electricity metering equipment (a.c.). General requirements, tests and test conditions. Part 21. Tariff and load control equipment

GOST IEC 62054-11-2014 交流电力计量. 收费和负载控制. 第11部分. 电子脉动控制接收器的特殊要求

Electricity metering (a.c.).Tariff and load control. Part 11. Particular requirements for electronic ripple control receivers

GSO IEC 62054-21:2013 交流电测量 负载和费率调整 第21部分：定时开关的特殊要求

Specifies particular requirements for the type test of newly manufactured indoor time switches with operation reserve that are used to control electrical loads, multi-tariff registers and maximum demand devices of electricity metering equipment. This publication is of high relevance for Smart Grid.

Electricity metering (a.c.) - Tariff and load control - Part 21: Particular requirements for time switches

GSO IEC 60364-7-718:2013 低压电气装置 第7-718部分：特殊装置或位置的要求 公共设施和工作场所

IEC 60364-7-718:2011 provides additional requirements for electrical installations applicable to communal facilities and workplaces. Typical examples of communal facilities and workplaces are: - assembly halls, - assembly rooms, - exhibition halls, - theatres, - cinemas, - sport arenas, - sales areas, - restaurants, - hotels, - guest houses, - residential care homes, - schools, - enclosed car parks, - meeting places, - swimming halls, - airports, - railway stations, - high-rise buildings, - workshops, - factories and - industrial plants. Access routes and escape routes are part of the above-mentioned examples. The necessity of providing safety services in special buildings and areas may be governed by national regulations which may contain more stringent requirements.

Low-voltage electrical installations - Part 7-718: Requirements for special installations or locations - Communal facilities and workplaces

NF C44-056-6-2:2013 电力计量数据交换. DLMS/COSEM套件. 第6-2部分: COSEM接口类

Electricity metering data exchange - The DLMS/COSEM suite - Part 6-2 : COSEM interface classes

NF C44-056-6-1:2013 电量测量数据交换.DLMS/COSEM套件.第6-1部分:目标识别系统(OBIS)

Electricity metering data exchange - The DLMS/COSEM suite - Part 6-1 : Object Identification System (OBIS)

CSA Z463-2013 电气系统维护指南

Scope 1.1 General 1.1.1 This Guideline provides guidance for the maintenance of electrical equipment and systems. 1.1.2 This Guideline applies to new and existing electrical equipment. For new installations of electrical equipment, this Guideline can be applied during the early design stages to allow for the implementation of proactive electrical maintenance practices and maintenance safety. 1.2 Purpose The purpose of this Guideline is to facilitate the safe, reliable, and cost-effective operation of electrical equipment and systems through the application of consistent maintenance practices. The recommendations in this Guideline are intended to address worker safety as a primary objective and the protection of property and the environment as secondary objectives. 1.3 Application This Guideline is suitable for application by organizations of any type or size. 1.4 Terminology This Guideline is written in non-prescriptive language. In this Guideline, "should" is used to express a recommendation, or that which is advised but not required, and "may" is used to express an option, or that which is permissible within the limits of the Guideline.

Guideline on Maintenance of Electrical Systems

DIN VDE 0603-5:2013 400V交流电用电设备和仪表配电盘. 第5部分:家用仪表配电盘用电子仪表 (eHZ) 的安装和连接 (BKE) 设备

Consumer distribution boards and meter panels AC 400 V - Part 5: Device for mounting and connection (BKE) of electronic meters (eHZ) for household use on meter panels

KS C IEC 61354:2013 电度表 计数装置的辅助终端标记

Electricity meters－Marking of auxiliary terminals for tariff devices

DS/HD 60364-5-56/A11:2013 低压电气装置 第 5-56 部分：电气设备的选择和安装 安全服务

IEC 60364-5-56:2009 covers general requirements for safety services, selection and erection of electrical supply systems for safety services and electrical safety sources. Standby electrical supply systems are outside the scope of this part. This part doe

Low-voltage electrical installations - Part 5-56: Selection and erection of electrical equipment - Safety services

BS EN 62056-6-2:2013 电量测量数据交换.DLMS/COSEM套件.COSEM接口类

Electricity metering data exchange. The DLMS/COSEM suite. COSEM interface classes

BS EN 62056-6-1:2013 电能测量数据交换. DLMS/COSEM程序组. 对象标识系统 (OBIS)

Electricity metering data exchange. The DLMS/COSEM suite. Object Identification System (OBIS)

JG/T 417-2013 建筑电气用并联有源电力滤波装置

本标准规定了建筑电气用并联有源电力滤波装置的术语和定义、分类、代号和标记、技术要求、试验方法、检验规则、标志和铭牌、包装、运输和贮存。本标准适用于民用与一般工业建筑配电系统,频率为50 Hz,额定工作电压不超过1 000(或1 140)V的并联有源电力滤波装置(以下简称装置)。

Shunt active power filtering equipment for electrical installation of buildings

GSO IEC 62054-11:2013 交流电气测量 负载和费率调整 第11部分：电子纹波调谐接收器的特殊要求

This part of IEC 62054 specifies particular requirements for the type test of newly manufactured indoor electronic ripple control receivers for the reception and interpretation of pulses of a single audio frequency superimposed on the voltage of the electricity distribution network and for the execution of the corresponding switching operations. In this system the mains frequency is generally used to synchronize the transmitter and receivers. Neither the control frequency nor the encoding are standardized in this standard. This standard gives no requirements for constructional details internal to the receiver. In the case where ripple control functionality is integrated in multifunction electricity metering equipment, the relevant parts of this standard apply. This standard does not cover the acceptance tests and the conformity tests. Nevertheless, an example of what could be an acceptance test is given in Annex D. The dependability aspect is covered by the documents of the IEC 62059 series. When using this standard in conjunction with IEC 62052-21, the requirements of this standard take precedence over those of IEC 62052-21 with regard to any item already covered in it.

Electricity metering (a.c.) - Tariff and load control - Part 11: Particular requirements for electronic ripple control receivers

DS/HD 60364-7-718:2013 低压电气装置 第 7-718 部分：特殊装置或场所的要求 公共设施和工作场所

IEC 60364-7-718:2011 provides additional requirements for electrical installations applicable to communal facilities and workplaces. Typical examples of communal facilities and workplaces are: - assembly halls, - assembly rooms, - exhibition halls, -

Low-voltage electrical installations - Part 7-718: Requirements for special installations or locations - Communal facilities and workplaces