共找到 818 条与 供电系统 相关的标准,共 55 页
Electricity metering equipment (a.c.). Particular requirements. Part 31. Pulse output devices for electromechanical and electronic meters (two wires only)
Electricity metering equipment (a.c.). Particular requirements. Part 61. Power consumption and voltage requirements
Electrical installations of buildings -- Part 5-55: Selection and erection of electrical equipment -- Other equipment
IEC 60364-5-54:2011 addresses the earthing arrangements and protective conductors including protective bonding conductors in order to satisfy the safety of the electrical installation. This third edition cancels and replaces the second edition, published in 2002, and constitutes a technical revision. The main changes with respect to the previous edition are listed below: - clarification of the definition of protective conductor; - improved specification of mechanical characteristics of the earth electrode; - introduction of earth electrode for protection against electric shock and lighting protection; - annexes describing concrete-embedded foundation earth
Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors
为在居住区供配电系统工程建设中贯彻执行国家的相关政策,做到技术先进、安全可靠、经济合理和维护方便,制订本规范。 本规范适用于新建、扩建和改建的居住区10(6)kV及以下供配电系统的工程建设。
Technical specification for power supply and distribution system in residential areas
IEC 60364-4-42:2010 applies to electrical installations with regard to measures for the protection of persons, livestock and property against: - thermal effects, combustion or degradation of materials, and risk of burns caused by electrical equipment, - flames in case of a fire hazard being propagated from electrical installations to other fire compartments segregated by barriers which are in the vicinity, and - the impairment of the safe functioning of electrical equipment including safety services. This third edition cancels and replaces the second edition, published in 2001, and constitutes a technical revision. The main changes with respect to the previ
Low voltage electrical installations - Part 4-42: Protection for safety - Protection against thermal effects
Low-voltage electrical installations - Part 5-55: Selection and erection of electrical equipment - Other equipment - Clause 551: Low-voltage generating sets (IEC 60364-5-55:2001/A2:2008 (Clause 551)); German implementation HD 60364-5-551:2010 + Cor. :2010
This Technical Report applies to low-voltage installations with a nominal system frequency of 50 Hz in which the circuits consist of insulated conductors, cables or busbar trunking systems.It defines the different parameters used for the calculation of the characteristics of electrical wiring systems in order to comply with rules of HD 384/HD 60364.These rules are mainly the following: - current-carrying capacities of the conductors; - characteristics of protective devices in regard to protection against overcurrent; - verification of thermal stress in conductors due to short-circuit current or earth fault current; - fault protection (protection against ind
Determination of cross-sectional area of conductors and selection of protective devices
IEC 60364-5-52:2009 deals with the selection and erection of wiring systems. This third edition cancels and replaces the second edition, published in 2001, and constitutes a technical revision. The main changes with respect to the previous edition are as follows: - Subclause 521.4 introduces minor changes with regard to busbar trunking systems and powertrack systems. - Subclause 523.6 introduces minor changes with regard to the sizing of cables where harmonic currents are present. - A new sublause 523.9 concerning single-core cables with a metallic covering has been introduced. - Clause 525 introduces changes in the maximum value of voltage drop permitted b
Low-voltage electrical installations - Part 5-52: Selection and erection of electrical equipment - Wiring systems
This European Standard specifies minimum requirements for earthing networks and connections (bonds) in buildings in which information technology equipment is intended to be installed to protect that equipment and interconnecting cabling from electrical hazards.Additionally this European Standard specifies requirements and provides recommendations for earthing networks and connections (bonds) in order for the information technology installation to achievea) reliable signal reference,b) adequate immunity from electromagnetic interference carried by the earthing network.The requirements of this European Standard are applicable to all types of buildings ranging
Application of equipotential bonding and earthing in buildings with information technology equipment
Applies to letter and graphical symbols intended for marking on and identifying the function of electromechanical or static a.c. electricity meters and their auxiliary devices.The symbols specified in this standard shall be marked on the name-plate, dial plate, external labels or accessories, or shown on the display of the meter as appropriate.
Electricity metering equipment (AC) - Particular requirements - Part 52: Symbols
Specifies essential requirements regarding protection against electric shock of persons and livestock. It deals also with the application and co-ordination of these requirements in relation to external influences. Requirements are also given for the application of additional protection in certain cases. Has the status of a group safety publication in accordance with IEC Guide 104.
Low-voltage electrical installations – Part 4-41: Protection for safety – Protection against electric shock
Electricity metering equipment (a.c.) - Acceptance inspection - Part 31: Particular requirements for static meters for active energy (classes 0,2 S, 0,5 S, 1 and 2, and class indexes A, B and C) (IEC 62058-31:2008, modified); German version EN 62058-31:20
Electricity metering equipment (a.c.) - Acceptance inspection - Part 21: Particular requirements for electromechanical meters for active energy (classes 0,5, 1 and 2 and class indexes A and B) (IEC 62058-21:2008, modified); German version EN 62058-21:2010
Electricity metering equipment (a.c.) - Acceptance inspection - Part 11: General acceptance inspection methods (IEC 62058-11:2008, modified); German version EN 62058-11:2010
Low-voltage electrical installations - Part 7-718: Requirements for special installations or locations - Communal facilities and workplaces
IEC 60364-7-702:2010 applies to electrical installations of: - basins of swimming pools and paddling pools and their surrounding zones; - areas in natural waters, lakes in gravel pits and coastal and similar areas, specially intended to be occupied by persons for swimming, paddling and similar purposes, and their surrounding zones. Such areas in natural waters, lakes in gravel pits and coastal and similar areas, are considered as swimming pools; - basins of fountains and their surrounding zones. For swimming pools for medical use, special requirements may apply. This third edition cancels and replaces the second edition published in 1997 and constitutes a t
Low-voltage electrical installations - Part 7-702: Requirements for special installations or locations - Swimming pools and fountains
Data exchange for meter reading, tariff and load control. Direct local data exchange
Low-voltage electrical installation. Part 7-713. Requirements for special installations or their locations. Furniture
Covers the physical aspects of both detachable and bottom-connected watthour meters and associated registers. These include ratings, internal wiring arrangements, pertinent dimensions, markings and other general specifications. Refer to the latest versions of ANSI C12.1 and ANSI C12.20 for performance requirements.
Physical Aspects of Watthour Meters - Safety Standard
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号