91.140.70 卫生设备 标准查询与下载
共找到 1134 条与 卫生设备 相关的标准，共 76 页
Glassfiber reinforced polyester water tank
- ICS
- 91.140.70
- CCS
- 发布
- 2017-12-22
- 实施
本标准规定了坐便器产品工程安装的术语和定义、坐便器产品分类和安装技术要求。 本标准适用于验收合格的一般民用和公共建筑用坐便器的安装。
Technical requirements for the installation of toilets
- ICS
- 91.140.70
- CCS
- Q31
- 发布
- 2017-11-07
- 实施
- 2018-04-01
This document specifies requirements for the cleanability, load resistance and durability of communal washing troughs used for domestic purposes.
Sanitary appliances - Communal washing troughs; German and English version EN 14296:2015/prA1:2017
- ICS
- 91.140.70
- CCS
- 发布
- 2017-09-00
- 实施
This European Standard specifies constructional and performance requirements together with test methods for close-coupled suites, one-piece and independent WC pans with integral trap used for personal hygiene manufactured from glazed ceramics or stainless steel. This standard does not apply to squatting toilets, WC pans without integral trap or flushing cisterns as separate appliances. In the case of independent WC pans, the associated flushing cisterns and pressure valves are covered by other standards and the reference to cisterns in this standard is related only to the definition and requirements of flushing volume.In the case of close-coupled suites and one-piece WCs, this standard also specifies design, performance requirements and the test methods for designated flushing cisterns with flushing mechanisms, inlet valves and overflows. For these products, this standard covers flushing cisterns designed to be connected to drinking water installations inside buildings. Before installation of WCs, EN 12056-2 and national requirements need to be taken into consideration.
WC pans and WC suites with integral trap; German and English version prEN 997:2017
- ICS
- 91.140.70
- CCS
- 发布
- 2017-09-00
- 实施
Sanitary tapware - Automatic shut-off valves PN 10
- ICS
- 91.140.70
- CCS
- Q81;J16
- 发布
- 2017-08-16
- 实施
- 2017-10-13
Sanitary tapware - Low pressure thermostatic mixing valves - General technical specification
- ICS
- 91.140.70
- CCS
- Q81
- 发布
- 2017-08-16
- 实施
- 2017-09-23
Sanitary tapware - Thermostatic mixing valves (PN 10) - General technical specification
- ICS
- 91.140.70
- CCS
- Q81;J16
- 发布
- 2017-08-09
- 实施
- 2017-09-16
Sanitary tapware - Thermostatic mixing valves (PN 10) - General technical specification
- ICS
- 91.140.70
- CCS
- 发布
- 2017-08-01
- 实施
Sanitary tapware - Low pressure thermostatic mixing valves - General technical specification
- ICS
- 91.140.70
- CCS
- 发布
- 2017-08-01
- 实施
本标准规定了铜合金陶瓷片密封水嘴(以下简称水嘴)的术语和定义、分类及命名、基本要求、产品要求、试验方法、检验规则、标志、包装、运输和贮存、质量承诺。 本标准适用于安装在建筑物内的冷热水供水管路末端、工作压力(静压)不大于1.0 MPa、介质温度为4 ℃～90 ℃的各类铜合金水嘴。
Ceramic cartridge faucets
- ICS
- 91.140.70
- CCS
- C3071
- 发布
- 2017-07-07
- 实施
- 2017-07-27
Sanitary installations. Part 2: Space recommendations. Code of practice
- ICS
- 91.140.70
- CCS
- Q81
- 发布
- 2017-07-05
- 实施
- 2017-07-31
Sanitary appliances - Sanitary ceramic WC pans
- ICS
- 91.140.70
- CCS
- 发布
- 2017-06-03
- 实施
- 2017-06-03
Household and similar electrical appliances ― Safety ― Part 2-84: Particular requirements for toilets
- ICS
- 91.140.70
- CCS
- 发布
- 2017-03-10
- 实施
Household and similar electrical appliances ― Safety ― Part 2-84: Particular requirements for toilets
- ICS
- 91.140.70
- CCS
- 发布
- 2017-03-10
- 实施
Household and similar electrical appliances ― Safety ― Part 2-84: Particular requirements for toilets
- ICS
- 91.140.70
- CCS
- 发布
- 2017-03-10
- 实施
1.1 This Standard covers plastic plumbing fixtures and specifies requirements for materials, construction, performance, testing, and markings. 1.2 This Standard covers the following plumbing fixtures: a) bathtubs and combination tub/showers; b) lavatories; c) shower bases and shower stalls; d) sinks: i) bar sinks; ii) kitchen sinks; iii) laundry sinks; and iv) service sinks; e) urinals; and f) water closets. 1.3 In this Standard, “shall” is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; “should” is used to express a recommendation or that which is advised but not required; and “may” is used to express an option or that which is permissible within the limits of the Standard. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application. 1.4 SI units are the units of record in Canada. In this Standard, the inch/pound units are shown in parentheses. The values stated in each measurement system are equivalent in application; however, each system is to be used independently. Combining values from the two measurement systems can result in non-conformance with this Standard. All references to gallons are to U.S. gallons. For information on the conversion criteria used in this Standard, see Annex A.
Plastic plumbing fixtures
- ICS
- 91.140.70
- CCS
- 发布
- 2017-03-01
- 实施
Sanitary ceramic wares. Test methods
- ICS
- 91.140.70
- CCS
- 发布
- 2017-00-00
- 实施
- 2018-03-01
