91.140.70 卫生设备 标准查询与下载

QB/T 1199-2014 浮球阀

本标准规定了浮球阀的结构型式、要求、试验方法、检验规则、标志、包装、运输和贮存。本标准适用于工作温度小于80 ℃、工作介质为水的公称压力不大于PN6的内、外螺纹连接浮球阀(公称尺寸DN不大于100mm)和法兰连接浮球阀(公称尺寸DN:>100mm~300mm)。

Float valve

QB/T 4769-2014 无障碍开门喷水按摩浴缸

本标准规定了无障碍开门喷水按摩浴缸的术语和定义、要求、试验方法、检验规则、标志、使用说明书、包装、运输和贮存。本标准适用于由浴缸、水泵和/或气泵、喷嘴、排水配件组装的无障碍开门喷水按摩浴缸(以下简称“开门缸”),也适用于无按摩功能的开门缸。

Walk-in whirlpool bathtub

DIN EN 31:2014 洗脸盆.连接尺寸

Wash basins - Connecting dimensions; German version EN 31:2011+A1:2014

DIN EN 35:2014 沿缘供水立柱式和壁挂式坐浴盆. 连接尺寸; 德文版本EN 35-2014

Pedestal and wall-hung bidets with over-rim supply - Connecting dimensions; German version EN 35:2014

BS EN 35:2014 沿缘供水立柱式和壁挂式坐浴盆. 连接尺寸

Pedestal and wall-hung bidets with over-rim supply. Connecting dimensions

EN 35:2014 从上面供水的立式坐浴盆.连接尺寸

This European Standard specifies the connecting dimensions of pedestal and wall-hung bidets with over-rim supply (further on: bidets) in accordance with EN 14528 regardless of materials used for their manufacture. NOTE 1 Other connecting dimensions are permitted, e. g. special designs of bidets, if the manufacturer supplies or recommends the appropriate fitting. NOTE 2 The shape of the appliance in the figures is for illustration only; it in no way prejudices the final shape of the appliance, which is left to the initiative of the manufacturer.

Pedestal and wall-hung bidets with over-rim supply - Connecting dimensions

LST EN 15091-2014 卫生设备用水龙头. 电动开关的卫生水龙头设备

Sanitary tapware - Electronic opening and closing sanitary tapware

EN 31:2011+A1:2014 洗脸盆.连接尺寸 包含修改件A1,2014

This European Standard specifies the connecting dimensions of wash basins in accordance with EN 14688 regardless of materials used for their manufacture. NOTE 1 Other connecting dimensions are permitted, e. g. special designs of wash basins, if the manufacturer supplies or recommends the appropriate fitting. NOTE 2 The shape of the appliance in the figures is for illustration only; it in no way prejudices the final shape of the appliance, which is left to the initiative of the manufacturer.

Wash basins - Connecting dimensions

DIN EN 15091:2014 卫生陶器.电动开关卫生陶器.德文版本EN 15091-2013

Sanitary tapware - Electronic opening and closing sanitary tapware; German version EN 15091:2013

NF D18-219*NF EN 15091:2014 卫生龙头配件. 电子开关式卫生龙头配件

L'objectif de la présente Norme européenne est de définir les exigences de marquage, d'identification, d'étanchéité, de sécurité électrique et de fonctionnement et de résistance mécanique pour la robinetterie sanitaire à ouverture et fermeture électroniques.

Sanitary tapware - Electronic opening and closing sanitary tapware

BS EN 15091:2013 卫生设备水龙头.电子开关卫生设备水龙头

Sanitary tapware. Electronic opening and closing sanitary tapware

DB35/T 1395-2013 水嘴、冲洗阀表面涂镀层耐腐蚀性能等级

本标准规定了水嘴、冲洗阀表面涂镀层耐腐蚀性能的等级、要求、检验规则及标识。 本标准适用于陶瓷片密封水嘴、大小便冲洗阀表面的防护装饰性的涂镀层耐腐蚀性能等级。

Corrosion resistance grade of surface coating and plating of faucets and flushing valves

KS F 6309-2013 住宅用浴室装置

Bath unit for dwellings

IEC 60335-2-84:2002+AMD1:2008+AMD2:2013 CSV 家用和类似用途电器 安全 第2-84部分 马桶器具的详细要求

Household and similar electrical appliances - Safety - Part 2-84: Particular requirements for toilet appliances

IEC 60335-2-84:2002/AMD2:2013 修改件2.家用和类似用途电器.安全.第2-84部分:马桶器具的特殊要求

Amendment 2 - Household and similar electrical appliances - Safety - Part 2-84: Particular requirements for toilet appliances

CSA B45.12-13/IAPMO Z402-2013(R2018) 铝和铜管道装置

Scope 1.1 This Standard covers aluminum and copper plumbing fixtures and specifies requirements for materials, construction, performance, testing, and markings of these fixtures. 1.2 This Standard covers the following plumbing fixtures: (a) bathtubs and combination tub/showers; (b) lavatories; (c) shower bases and shower stalls; and (d) sinks: (i) bar sinks; (ii) kitchen sinks; (iii) laundry sinks; (iv) service sinks; and (v) drinking fountains. 1.3 In this Standard, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; "should" is used to express a recommendation or that which is advised but not required; and "may" is used to express an option or that which is permissible within the limits of the standard. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application. 1.4 SI units are the units of record in Canada. In this Standard, the inch/pound units are shown in parentheses. The values stated in each measurement system are equivalent in application; however, each system is to be used independently. Combining values from the two measurement systems can result in non-conformance with this Standard. All references to gallons are to U.S. gallons. For information on the conversion criteria used in this Standard, see Annex A.

Aluminum and copper plumbing fixtures

IEC 60335-2-84:2013 家用和类似用途电器. 安全性. 第2-84部分: 座便器的特殊要求

Household and similar electrical appliances - Safety - Part 2-84: Particular requirements for toilets

KS C IEC 60335-2-84:2013 家用和类似用途电器的安全性.第2-84部分:坐便器的特殊要求

제1부의 이 항을 다음으로 대체한다.이 표준은 정격전압이 250 V 이하이고, 배설물을 저장, 건조, 분해하는 변기용 전기기기의 안전을 다룬다.이 표준은 재래식 변기에 사용하는 전기기기에도 적용한다.이 표준은 가정에서 모든 사람이 직면하는, 기기에 의한 일반적인 위해를 다루고 있다. 그러나 일반적으로 기기를 갖고 노는 어린이는 고려하지 않는다.

Household and similar electrical appliances ― Safety ― Part 2-84: Particular requirements for toilets

DS/EN 33/AC:2013 马桶和马桶套件 连接尺寸

This European Standard specifies the connecting dimensions of WC pans and WC suites regardless of the materials used for their manufacture. This European Standard does not apply to siphonic action WC pans and WC suites. NOTE 1 Other connecting dimensions

WC pans and WC suites - Connecting dimensions

13/30280712 DC BS EN 1111 卫生水龙头 恒温混合阀 (PN 10) 通用技术规格

BS EN 1111. Sanitary Tapware. Thermostatic Mixing Valves (PN 10). General Technical Specification