91.140.70 卫生设备 标准查询与下载
共找到 1134 条与 卫生设备 相关的标准，共 76 页
This European Standard specifies:the dimensional, leaktightness, mechanical, hydraulic and acoustic characteristics with which extractable outlets with or without spray mode selector function need to comply; the procedures for testing these characteristics.It applies to extractable outlets made from any material which is intended for equipping and supplementing sanitary tapware for sinks and wash-basins used for culinary or ablutionary purposes. Such extractable outlets shall only be connected downstream of the obturator of the tapware. Extractable outlets with total closing device fitted after the obturator of the tapware are not covered by this standard.
Sanitary tapware - Extractable outlets for sink and basin mixers - General technical specification
- ICS
- 91.140.70
- CCS
- 发布
- 2012
- 实施
This European Standard specifies requirements for the connecting dimensions of baths, regardless of the
Baths - Connecting dimensions
- ICS
- 91.140.70
- CCS
- 发布
- 2012
- 实施
This European Standard applies to hoses for extractable outlets of any material intended for equipping sanitary tapware for sinks and basins. Such hoses will only be connected downstream of the obturator of the tapware. The tapware will comply with EN 200, EN 817, EN 1111, EN 1286 or EN 1287 (see [1], [2], [3], [5] and [6]).Hoses intended to connect sanitary tapware to the water supplies are not covered by this standard.This European Standard specifies:the dimensional, mechanical and hydraulic characteristics with which the hose for extractable outlets shall comply;the procedures for testing these characteristics.Details of pressures and temperatures are gi
Sanitary tapware - Extractable shower hoses for sanitary tapware for supply systems type 1 and type 2 - General technical specification (Incorporates Amendment A1: 2014)
- ICS
- 91.140.70
- CCS
- 发布
- 2012
- 实施
This European Standard specifies requirements for the connecting dimensions for shower trays, regardless of
Shower trays - Connecting dimensions
- ICS
- 91.140.70
- CCS
- 发布
- 2012
- 实施
Specification for dula flush low capacity water closet(WC) up to 4.5/3.0 litres capacity Part 2: WC pans
- ICS
- 91.140.70
- CCS
- 发布
- 2012
- 实施
- 2012
WC pans and WC suites - Connecting dimensions
- ICS
- 91.140.70
- CCS
- 发布
- 2011-12-30
- 实施
- 2011-12-30
Wash basins - Connecting dimensions
- ICS
- 91.140.70
- CCS
- 发布
- 2011-12-30
- 实施
- 2011-12-30
Plumbing Supply Fittings
- ICS
- 91.140.70
- CCS
- 发布
- 2011-11-01
- 实施
This Standard covers plumbing supply fittings and accessories located between the supply stop and the terminal fitting, inclusive, as follows: (a) automatic compensating valves for individual wall-mounted showering systems; (b) bath and shower supply fittings; (c) bidet supply fittings; (d) clothes washer supply fittings; (e) drinking fountain supply fittings; (f) humidifier supply stops; (g) kitchen, sink, and lavatory supply fittings; (h) laundry tub supply fittings; (i) lawn and sediment faucets; (j) metering and self-closing supply fittings; (k) shower heads, hand-held showers, and body sprays; and (l) supply stops. This Standard does not cover (a) plumbing waste fittings, which are covered by ASME A112.18.2/CSA B125.2; (b) other devices (e.g., temperature-actuated in-line mixing valves), which are covered by CSA B125.3 or other plumbing product Standards; and (c) flexible water connectors under continuous pressure, which are covered by ASME A112.18.6/CSA B125.6.
Plumbing Supply Fittings
- ICS
- 91.140.70
- CCS
- Q81
- 发布
- 2011-11-01
- 实施
This guideline offers recommendations regarding the space required for sanitary equipment rooms, the installation of the required sanitary apparatus and installations for buildings and associated outdoor facilities. These recommendations are intended to enable architects and planners to dimension and equip such rooms in an appropriate manner.
Requirements for mechanical equipment rooms - Sanitary engineering
- ICS
- 91.140.70
- CCS
- 发布
- 2011-11
- 实施
This European Standard specifies the connecting dimensions of WC pans WC suites regardless of the materials used for their manufacture.
WC pans and WC suites - Connecting dimensions; German version EN 33:2011
- ICS
- 91.140.70
- CCS
- Q81
- 发布
- 2011-11
- 实施
This European Standard specifies the connecting dimensions of wash basins in acordance with EN 14688 regardless of materials used for their manufacture.
Wash basins - Connecting dimensions; German version EN 31:2011
- ICS
- 91.140.70
- CCS
- Q31
- 发布
- 2011-11
- 实施
This standard specifies the requirements for quality control for waste outlets, traps and overflows for kitchen sinks, shower trays, wash basins, bidets and baths which are connected to gravity drainage systems, whatever the purpose of the building, to ensure conformity of these products with EN 274-1.
Waste fittings for sanitary appliances - Part 3 : Quality control
- ICS
- 91.140.70
- CCS
- 发布
- 2011-10-12
- 实施
This standard specifies requirements and test methods for multifunction shower cabinets (subsequently referred to as unit(s)), used for domestic purposes. This standard does not apply to shower cabinets and shower enclosures. NOTE For the purposes of this standard the term "domestic purposes" includes use in hotels, accommodation for students and similar buildings, except when special provisions e. g. medical, are required.
Sanitary appliances - Multifunction shower cabinets
- ICS
- 91.140.70
- CCS
- 发布
- 2011-10-12
- 实施
This European Standard specifies the requirements for shower trays for domestic purposes made from impact modified extruded acrylic sheet conforming with EN 13558 with the aim of ensuring that the product, when installed in accordance with the manufacturer's instructions, will provide satisfactory performance in use. This standard is applicable to all sizes and shapes of shower trays.
Sanitary appliances - Shower trays made from impact modified extruded acrylic sheets - Requirements and test methods
- ICS
- 91.140.70
- CCS
- 发布
- 2011-10-12
- 实施
This standard specifies the dimensional, performance, materials and marking requirements for waste outlets, traps and overflows for kitchen sinks, shower trays, wash basins, bidets and baths which are connected to gravity drainage systems, whatever the purpose of the building. This standard does not specify requirements for waste outlets, traps and overflows which are integral with sanitary appliances. NOTE All figures in this standard are diagrammatic only. This standard does not cover the possible effect of aggressive drain cleaning materials on products.
Waste fittings for sanitary appliances - Part 1: Requirements
- ICS
- 91.140.70
- CCS
- 发布
- 2011-10-12
- 实施
This European Standard specifies the connecting dimensions of wash basins in accordance with EN 14688 regardless of materials used for their manufacture.NOTE 1 Other connecting dimensions are permitted, e.g. special designs of wash basins, if the manufacturer supplies or recommends the appropriate fitting.NOTE 2 The shape of the appliance in the figures is for illustration only; it in no way prejudices the final shape of the appliance, which is left to the initiative of the manufacturer.
Wash basins - Connecting dimensions
- ICS
- 91.140.70
- CCS
- 发布
- 2011-10-10
- 实施
- 2011-10-10
This European Standard specifies the connecting dimensions of WC pans and WC suites regardless of the materials used for their manufacture.This European Standard does not apply to siphonic action WC pans and WC suites.NOTE 1 Other connecting dimensions are permitted, e. g. special designs of WC pans, if the manufacturer supplies or recommends the appropriate fittings.NOTE 2 The shape of the appliance in the figures is for illustration only; it in no way prejudices the final shape of the appliance, which is left to the initiative of the manufacturer.
WC pans and WC suites - Connecting dimensions
- ICS
- 91.140.70
- CCS
- 发布
- 2011-10-10
- 实施
- 2011-10-10
