91.140.70 卫生设备 标准查询与下载

BS EN 15719:2010 卫生用具 冲挤改良型共膨化丙烯腈-丁二烯-苯乙烯（ABS）/聚丙烯薄板制浴缸 试验方法和要求

Sanitary appliances. Baths made from impact modified coextruded ABS/acrylic sheets. Requirements and test methods

NF D11-140:2010 卫生设备.抗冲击性改进的丙烯腈-丁二烯-苯乙烯共聚物(ABS)/丙烯酸薄板制浴室.要求和试验方法

Sanitary appliances - Baths made from impact modified coextruded ABS/acrylic sheets - Requirements and test methods.

EN 14055:2010 WC和小便器冲刷水箱

This European Standard specifies design, performance requirements and the test methods for WC and urinal flushing cisterns with flushing mechanism, inlet valve and overflow.This document covers flushing cisterns designed to be connected to drinking water installations inside buildings.This standard does not cover automatic valveless siphon flushing cisterns for flushing urinals. NOTE Flushing cisterns for one-piece WCs and close-coupled suites are covered by EN 997.

WC and urinal flushing cisterns (Incorporates Amendment A1: 2015)

ANSI/ASME A112.6.7-2010 卫生地板污水池

This Standard applies to sanitary floor sinks and includes requirements for material, construction, inspection, testing, and marking. The provisions of this Standard are not intended to prevent the use of any alternate materials or methods of construction, provided any such alternate meets the intent of this Standard.

Sanitary Floor Sinks

ANSI/ASSE 1050-2010 用于卫生排水系统堆栈进气阀(AAV's)性能要求

These stack AAV's are used in the plumbing drainage system to prevent siphonage of water trap seals and are installed on stacks where branches on multiple floors are connected and prevent sewer gases from entering the building.

Performance Requirements for Stack Air Admittance Valves (AAV's) for Sanitary Drainage Systems

ANSI/ASSE 1049-2010 化学废物处理系统用个体和支型吸气阀(AAV's)的性能要求

These are individual and branch type AAV's for chemical waste systems to prevent the siphonage of trap seals for individual and multiple fixtures and prevent sewer gases from entering the building.

Performance Requirements for Individual and Branch Type Air Admittance Valves (AAV's) for Chemical Waste Systems

ANSI/ASME A112.19.3-2010 不锈钢卫生设备

This update to ASME A112.19.3-2008/CSA B45.4-2008 is to make the dimensions of shower base flange similar to bathtub flange dimensions as in ASME A112.19.2/CSA B45.1, Clause 4.9.3.

Stainless Steel Plumbing Fixtures

ASTM A1045-10 抽水马桶与卫生排水系统连接用柔性聚氯乙烯(PVC)垫圈的标准规格

1.1 This specification covers material and performance requirements for plasticized PVC compression gaskets used in the connection of residential and commercial vitreous china plumbing fixtures to 2, 3 and 4-in. sanitary drain lines. These type gaskets are inserted into and compress against the inside diameter of the sewer pipe, closet or urinal flange while attaching to the vitreous china plumbing fixture with a flexible adhesive. The result is a gas- and water-tight seal. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, is any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

Standard Specification for Flexible Poly (Vinyl Chloride) (PVC) Gaskets used in Connection of Vitreous China Plumbing Fixtures to Sanitary Drainage Systems

LST EN 15200-2007/AC-2009 卫浴电器-多功能淋浴柜

Sanitary appliances - Multifunction shower cabinets

DS/EN 15200/AC:2009 卫浴电器-多功能淋浴柜

This standard specifies requirements and test methods for multifunction shower cabinets (subsequently referred to as unit(s)), used for domestic purposes.This standard does not apply to shower cabinets and shower enclosures.NOTE For the purposes of this standard the term """"domestic purposes"""" includes use in hotels, accommodation for students and similar buildings, except when special provisions e. g. medical, are required.

Sanitary appliances - Multifunction shower cabinets

NF D11-107:2009 卫生洁具.卫生陶瓷坐浴盆

Sanitary appliances - Sanitary ceramic bidets.

NF D11-112:2009 卫生洁具.搪瓷表面的外观检查.搪瓷材料浴缸

Sanitary appliances - Enamelled material baths.

NF D11-101:2009 卫生洁具.卫生陶瓷盥洗池

Sanitary appliances - Sanitary ceramic wash basins.

NF D12-210:2009 卫生洁具.合成材料的厕所盥洗池和表面

Sanitary appliances - Synthetic material toilet wash-basins and surfaces.

NF D11-124:2009 卫生洁具.搪瓷浴盆

Sanitary appliances - Vitreous enamelled shower trays.

NF D12-101:2009 卫生洁具.卫生间用陶瓷坐便器

Sanitary appliances - Sanitary ceramic WC pans.

SANS 60335-2-84:2009 家用及类似用途电器.安全.第2-84部分:对座便器的特殊要求

Deals with the safety of electric toilets in which excrement is stored, dried or destructed, their rated voltage being not more than 250 V.

Household and similar electrical appliances - Safety Part 2-84: Particular requirements for toilets

ASME A112.19.2 Update 1-2009 陶瓷卫生洁具;更新1

Ceramic Plumbing Fixtures; Update 1

ASME A112.19.3 Update 1-2009 不锈钢卫生洁具;更新1

Stainless Steel Plumbing Fixtures; Update 1

KS L 1004-2009 住宅用抽水马桶

이 표준은 주로 주택에 사용하는 간이 수세변기1)(이하 변기라 한다.)에 대하여 규정한다.

Trapless water toilet bowls