91.140.70 卫生设备 标准查询与下载

KS L 1004-2009 住宅用抽水马桶

이 표준은 주로 주택에 사용하는 간이 수세변기1)(이하 변기라 한다.)에 대하여 규정한다.

Trapless water toilet bowls

DS/EN 14428+A1/ZA:2009 淋浴间 功能要求和测试方法

This document specifies requirements for shower enclosures for domestic purposes which ensure that the product, when installed in accordance with the manufacturer's installation instructions, gives satisfactory performance when used as intended.This document does not apply to shower cabinets or curtains and does not specify aesthetic and dimensional requirements.NOTE For the purposes of this document the term """"domestic purposes"""" includes use in hotels, accommodation for students, hospitals and similar buildings, except when special medical provisions are required.

Shower enclosures - Functional requirements and test methods

JIS A 4422:2009 带冲洗装置的马桶座

This Japanese Industrial Standard specifies the toilet seat or the heated toiled seat with shower unit (hereafter referred to as "toilt seat with shower unit")in which tap water to be used for washing (including water with the equivalent quality)is electrically heated, and which is mainly for home use.

Toilet seat with shower unit

SANS 907:2009 机构用不锈钢

Covers material, dimensional, and constructional requirements for stainless steel crockery sinks with draining boards and stainless steel pot sinks, for use in institutions.

Stainless steel sinks for institutional use

JIS A 5712 AMD 1:2009 与地面相连的玻璃纤维增强塑料浴盆(修改件1)

This translation has been made based on the Amendment to the origi- nal Japanese Industrial Standard revised by the Minister of Economy, Trade and Industry through deliberations at the Japanese Industrial Standards Committee as the result of proposal for revision of Japanese Industrial Standard with the draft being attached, based on the provi- sion of Article 12 Clause 1 of the Industrial Standardization Law ap- plicable to the case of revision by the provision of Article 14. Consequently, JIS A 5712:1994 is partially replaced with this Amend- ment.

Glass fiber reinforced plastic bathtubs connected with floor (Amendment 1)

JIS A 5105 AMD 1:2009 无存水弯的抽水马桶(修改件1)

Trapless water toilet bowls (Amendment 1)

GSO IEC 60335-2-84:2009 家用和类似用途电器 安全 第2-84部分：特殊要求 厕所

Deals with the safety of electric toilets in which excrement is stored, dried, or destructed, their rated voltage being not more than 250 V. Electric toilets may be used to process garbage such as paper and food waste. This standard also applies to electric equipment for use with conventional toilets, examples of such equipment are automatic seat covering devices; chopping units; heated seats; pumping units; water heaters for shower units. This consolidated version consists of the second edition (2002) and its amendment 1 (2008). Therefore, no need to order amendment in addition to this publication.

Household and similar electrical appliances - Safety - Part 2-84 : Particular requirements for toilets

DIN EN 60335-2-84:2009 家用和类似用途电器.安全性.第2-84部分:抽水马桶的特殊要求(60335-2-84-2002 + 技术勘误-2003 + A1-2008)

Household and similar electrical appliances - Safety - Part 2-84: Particular requirements for toilets, (IEC 60335-2-84:2002 + Corrigendum:2003 + A1:2008); German version EN 60335-2-84:2003 + A1:2008

BS EN 200:2009 卫生用水龙头 1型和2型供水设备用单一水龙头和组合水龙头 通用技术规范

Sanitary tapware - Single taps and combination taps for water supply systems of type 1 and type 2. General technical specification

BS EN 200:2008 卫生用水龙头.1型和2型供水设备用单一水龙头和组合水龙头.通用技术规范

This European Standard specifies: a) the field of application for pillar taps, bib taps, single and multi-hole combination taps for use in: 1) a supply system of Type 1 (see Figure 1); 2) a supply system of Type 2 (see Figure 2); b) the dimensional, leaktightness, pressure resistance, hydraulic performance, mechanical strength, endurance and acoustic characteristics of nominal size ½ and ¾ single taps and combination taps; c) test methods to verify the characteristics. The tests described in this European Standard are type tests (laboratory tests) and not quality control tests carried out during manufacture. This European Standard applies to draw-off taps (single taps and combination taps) for use with sanitary appliances installed in rooms used for bodily hygiene (cloakrooms, bathrooms etc.) and in kitchens, i.e. for use with baths, wash basins, bidets, showers and sinks. Figure 1 shows a supply system of Type 1 with a pressure range of (0,05 to 1,0) Mpa [(0,5 to 10) bar]. Figure 2 shows a supply system of Type 2 with a pressure range of (0,01 to 1,0) Mpa [(0,1 to 10) bar]. This European Standard applies to sanitary draw-off taps of nominal size ½ and ¾ (PN 10). The conditions of use and classifications are given in Table 1. The Table 2 gives the performance characteristics to be noted if the tap is used outside the recommended operating range.

Sanitary tapware - Single taps and combination taps for water supply systems of type 1 and type 2. General technical specification

DIN EN 60335-2-105:2009 家用和类似用途电器.安全性.第2-105部分:多功能淋浴间的特殊要求

Household and similar electrical appliances - Safety - Part 2-105: Particular requirements for multifunctional shower cabinets (IEC 60335-2-105:2004 + A1:2008); German version EN 60335-2-105:2005 + A1:2008

EN 15719:2009 卫生用具.冲击改良型共挤ABS/丙烯酸片制成的浴缸.要求和试验方法

This European Standard specifies requirements for baths for domestic purposes made from impact modified coextruded ABS/acrylic sheets conforming to EN 13559 with the aim of ensuring that the product; when installed in accordance with the manufacturer's instructions; will provide satisfactory performance in use.This European Standard is applicable to all sizes and shapes of baths.

Sanitary appliances - Baths made from impact modified coextruded ABS/acrylic sheets - Requirements and test methods

ASME A112.4.2-2009 抽水马桶个人卫生装置

This Standard establishes general and performance requirements, test methods, and marking requirements for bidet sprays and other optional features as applied to water closets, water closet seats, and other retrofit devices. Products covered by this Standard are intended to be supplied with cold and/or hot water.

Water Closet Personal Hygiene Devices

ANSI/ASME A112.18.6-2009 柔性水管连接器

This Standard establishes requirements for flexible water connectors used in potable water systems under continuous pressure and in accessible locations or intermittent pressure for use in RV only. It covers physical and performance requirements, test methods, materials, connections and other significant properties, in addition to a general description of materials used. Certain features of construction of the finished product are given, together with the method of marking and identification.

Flexible Water Connectors

ASME A112.19.8b Addenda-2009 游泳池、浅水池、温泉浴场和热水浴缸使用的抽吸配件.勘误

This document establishes materials, testing, and marking requirements for suction fittings that are designed to be totally submerged for use in swimming pools, wading pools, spas, and hot tubs, as well as other aquatic facilities.

Suction Fittings for Use in Swimming Pools, Wading Pools, Spas, and HotTubs; Addenda

ANSI/ASSE 1055-2009 化学配药系统的性能要求

Chemical dispensing systems provide a means of mixing potable water with chemicals to provide the user with a chemical solution which is ready for use. The amount of dilution shall be fixed or adjustable.This standard applies to those devices classified as chemical dispensing systems having a self-contained means of backflow protection.

Performance Requirements for Chemical Dispensing Systems

ANSI/ASME A112.4.2-2009 抽水马桶个人卫生设备(补充件)

This Standard establishes general and performance requirements, test methods, and marking requirements for bidet sprays and other optional features as applied to water closets, water closet seats, and other retrofit devices. Products covered by this Standard are intended to be supplied with cold and/or hot water. The provisions of this Standard are not intended to prevent the use of any alternate material or method of construction, provided any such alternate meets the intent of this Standard.

Water Closet Personal Hygiene Devices (Supplement)

ANSI/ASSE 1002-2009 洗手间水箱反虹吸注水阀的性能要求

This standard provides dimensional and minimum performance requirements for anti-siphon fill valves for water closet tanks , including protection of the potable water supply against back siphonage of water from the water closet tank.

Performance Requirements for Anti-Siphon Fill Valves for Water Closet Tanks

EN 15720:2009 卫生设备.冲击性改进的挤压ABS/丙烯酸薄板材制淋浴槽.要求和试验方法

This European Standard specifies the requirements for shower trays for domestic purposes made from crosslinked cast acrylic sheets conforming to EN 13559 with the aim of ensuring that the product; when installed in accordance with the manufacturer's instructions; will provide satisfactory performance in use.This European Standard is applicable to all sizes and shapes of shower trays.

Sanitary appliances - Shower trays made from impact modified coextruded ABS/acrylic sheets - Requirements and test methods

BS EN 817:2008 卫生器皿.机械混合阀(PN 10).一般技术规范

This European Standard specifies:  the dimensional, leaktightness, pressure resistance, hydraulic performance, mechanical strength, endurance and acoustic characteristics with which mechanical mixing valves need to comply;  test methods to verify the characteristics. The tests described in this European Standard are type tests (laboratory tests) and not quality control tests carried out during manufacture. This European Standard applies to PN 10 mechanical mixing valves for use with sanitary appliances installed in rooms used for bodily hygiene (cloakrooms, bathrooms, etc.) and in kitchens, i.e. for use with baths, wash basins, bidets, showers and sinks. The conditions of use and classifications are given in 0.

Sanitary tapware - Mechanical mixing valves (PN 10) - General technical specifications