91.140.70 卫生设备 标准查询与下载

DS/EN 60335-2-105/A1:2008 家用和类似用途电器 安全 第 2-105 部分：多功能淋浴柜的特殊要求

Deals with the safety of electric multifunctional shower cabinets and electric separate multifunctional shower units for household and similar purposes, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. This standard however, in general, does not take into account the use of appliances by- persons (including children) whose *physical, sensory or mental capabilities; or *lack of experience and knowledgeprevent them from using the appliance safely without supervision or instruction;- children playing with the appliance.

Household and similar electrical appliances - Safety - Part 2-105: Particular requirements for multifunctional shower cabinets

SANS 549:2008 住宅用淋浴房

Specifies requirements for the installation of shower enclosures for domestic purposes, but does not apply to shower cabinets or curtains and does not specify aesthetic and dimensional requirements.

Shower enclosures for domestic purposes

EN 198:2008 卫生设施.交联铸造丙烯酸薄板制造的浴室.要求和试验方法

This European Standard specifies requirements for baths for domestic purposes made from crosslinked cast acrylic sheet conforming to EN 263 with the aim of ensuring that the product, when installed in accordance with the manufacturer's instructions, will provide satisfactory performance in use. This European Standard is applicable to all sizes and shapes of baths.

Sanitary appliances - Baths made from crosslinked cast acrylic sheets - Requirements and test methods

IEC 60335-2-84:2002+AMD1:2008 CSV 家用和类似用途电器的安全第2-84部分:马桶器具的特殊要求

Household and similar electrical appliances - Safety - Part 2-84: Particular requirements for toilet appliances

EN 200:2008 卫生用水龙头.1型和2型供水设备用单一水龙头和组合水龙头.通用技术规范

This European Standard specifies: a) the field of application for pillar taps, bib taps, single and multi-hole combination taps for use in: 1) a supply system of Type 1 (see Figure 1); 2) a supply system of Type 2 (see Figure 2); b) the dimensional, leaktightness, pressure resistance, hydraulic performance, mechanical strength, endurance and acoustic characteristics of nominal size 1/2 and 3/4 single taps and combination taps; c) test methods to verify the characteristics. The tests described inThis European Standard are type tests (laboratory tests) and not quality control tests carried out during manufacture.

Sanitary tapware - Single taps and combination taps for water supply systems of type 1 and type 2 - General technical specification

IEC 60335-2-84:2008 家用和类似用途电器.安全性.第2-84部分:抽水马桶的特殊要求

This clause of Part 1 is replaced by the following. This International Standard deals with the safety of electric toilets in which excrement is stored, dried or destructed, their rated voltage being not more than 250 V. NOTE 101 Electric toilets may be used to process garbage such as paper and food waste. This standard also applies to electric equipment for use with conventional toilets. NOTE 102 Examples of such electric equipment are - automatic seat covering devices; - chopping units; - heated seats; - pumping units; - water heaters for shower units. As far as is practicable, this standard deals with the common hazards presented by appliances that are encountered by all persons in and around the home. However, in general, it does not take into account young children playing with the appliance. NOTE 103 Attention is drawn to the fact that - for appliances intended to be used in vehicles or on board ships or aircraft, additional requirements may be necessary; - in many countries additional requirements are specified by the national health authorities, the national authorities responsible for the protection of labour, the national water supply authorities and similar authorities. NOTE 104 This standard does not apply to - appliances intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapour or gas); - chemical toilets; - toilets in which excrement is destructed by combustion.

Household and similar electrical appliances - Safety - Part 2-84: Particular requirements for toilets

SANS 60335-2-105:2008 家用及类似用途电器.安全.第2-105部分:对多功能淋浴房的特殊要求

Deals with the safety of electric multifunctional shower cabinets and electric separate multifunctional shower units for household and similar purposes, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other applian

Household and similar electrical appliances - Safety Part 2-105: Particular requirements for multifunctional shower cabinets

DS/EN 263:2008 卫生器具 家用浴缸和淋浴盆用交联浇铸丙烯酸板材

This European Standard specifies requirements and test methods for cross-linked cast acrylic sheets (called acrylic sheets hereafter) from which baths and shower trays for domestic purposes are manufactured.NOTE For the purposes of this standard, the term """"domestic purposes"""" includes use in hotels, accommodation for students, hospitals and similar buildings, except when special medical provisions are required.

Sanitary appliances - Crosslinked cast acrylic sheets for baths and shower trays for domestic purposes

DS/EN 1112:2008 卫生龙头 1 类和 2 类供水系统卫生龙头淋浴出口 通用技术规范

This European Standard specifies:- the dimensional, leaktightness, mechanical, hydraulic and acoustic characteristics with which shower outlets shall comply;- the procedures for testing these characteristics.This European Standard applies to shower heads and hand showers of any material used for ablutionary purposes and intended for equipping and supplementing sanitary tapware for baths and showers. This European Standard applies to shower heads and hand showers connected downstream of the obturator of the tapware.Integral and remote spray attachments incorporated in tapware (e.g. sink and wash basin mixing valves) are not covered by this standard.

Sanitary tapware - Shower outlets for sanitary tapware for water supply systems of type 1 and type 2 - General technical specification

JC/T 764-2008 坐便器坐圈和盖

本标准规定了坐便器坐圈和盖的术语和定义、分类、要求、试验方法、检验规则、标志、使用说明书、包装、运输和贮存。 本标准适用于安装在坐便器使用面上，起舒适、卫生、美观作用的由塑料、木质、复合材料、树脂等材料加工制成的坐便器坐圈和盖（以下简称坐圈和盖）。

WC seats

JC/T 760-2008 浴盆及淋浴水嘴

本标准规定了浴盆及淋浴水嘴（以下简称水嘴）的术语和定义；分类、代号及标记；材料；技术要求；试验方法；检验规则及标志、包装、运输和贮存。 本标准适用于公称通径为DN15、DN20，公称压力不大于1.0MPa，安装在建筑物内的冷、热水供水管路上，介质温度不大于90℃条件下的各类浴盆及淋浴水嘴。

Bathtub and shower faucets

JC/T 758-2008 面盆水嘴

本标准规定了面盆水嘴的分类、代号及标记；一般要求；技术要求；试验方法；检验规则；标志、包装、运输和贮存。 本标准适用于安装在建筑物内的冷、热水供水管路上，公称压力不大于1.0MPa，介质温度不大于90℃条件下的面盆水嘴。

Washbasin faucets

EN 817:2008 卫生用水龙头.机械混合阀(PN 10).一般技术规范

This European Standard specifies: the dimensional, leaktightness, pressure resistance, hydraulic performance, mechanical strength, endurance and acoustic characteristics with which mechanical mixing valves need to comply; test methods to verify the characteristics. The tests described inThis European Standard are type tests (laboratory tests) and not quality control tests carried out during manufacture.This European Standard applies to PN 10 mechanical mixing valves for use with sanitary appliances installed in rooms used for bodily hygiene (cloakrooms, bathrooms, etc.) and in kitchens, i.e. for use with baths, wash basins, bidets, showers and sinks. The conditions of use and classifications are given in 0.

Sanitary tapware - Mechanical mixing valves (PN 10) - General technical specifications

DIN EN 1112:2008 卫生设备用水龙头.1型和2型供水系统用卫生设备水龙头的淋浴喷头.一般技术规范

This European Standard specifies: -- the dimensional, leaktightness, mechanical, hydraulic and acoustic characteristics with which shower outlets shall comply; -- the procedures for testing these characteristics. This European Standard applies to shower heads and hand showers of any material used for ablutionary purposes and intended for equipping and supplementing sanitary tapware for baths and showers. This European Standard applies to shower heads and hand showers connected downstream of the obturator of the tapware. Integral and remote spray attachments incorporated in tapware (e.g. sink and wash basin mixing valves) are not covered by this standard. Details of pressures and temperatures are given in Table 1.

Sanitary tapware - Shower outlets for sanitary tapware for water supply systems of type 1 and type 2 - General technical specification; English version of DIN EN 1112:2008-06

LST EN 14428-2005+A1-2008 淋浴间 功能要求和测试方法

Shower enclosures - Functional requirements and test methods

LST EN 12764-2005+A1-2008 卫生器具 涡流浴缸规范

Sanitary appliances - Specification for whirlpool baths

EN 15389:2008 工业阀门.当作为结构制品使用时热塑性阀门的性能特点

This European Standard specifies performance requirements and means for evaluation of conformity for valves of thermoplastic material, by reference to product standards, for use in building and civil engineering applications for the delivery of liquid and gaseous fluids. It also contains information required for the purposes of regulatory marking. NOTE For information, thermoplastic valves in conformity withThis European Standard should be considered suitable for drinking water applications subject to either: a) compliance with any national regulations in the country of intended destination, which can include testing ifThis is the demonstration of fitness for drinking water applications; b) internal coating of the Product and subsequent testing if required by the national regulations in the intended country of destination.

Industrial valves - Performance characteristics of thermoplastic valves when used as construction products

NF D11-126:2008 卫生器具.涡流浴池的规范.

Sanitary appliances - Specification for whirlpool baths.

NF D11-127/IN1:2008 家用淋浴盆

Shower trays for domestic purposes.

NF D11-128:2008 家庭用浴场

Baths for domestic purposes.