91.140.70 卫生设备 标准查询与下载

NF D11-127:2008 家用淋浴盆

Shower trays for domestic purposes.

NF D11-105:2008 坐浴盆.功能要求和试验方法

Bidets - Functional requirements and test methods.

DS/EN 14428+A1:2008 淋浴间 功能要求和测试方法

This document specifies requirements for shower enclosures for domestic purposes which ensure that the product, when installed in accordance with the manufacturer's installation instructions, gives satisfactory performance when used as intended.This document does not apply to shower cabinets or curtains and does not specify aesthetic and dimensional requirements.NOTE For the purposes of this document the term """"domestic purposes"""" includes use in hotels, accommodation for students, hospitals and similar buildings, except when special medical provisions are required.

Shower enclosures - Functional requirements and test methods

DS/EN 15091/AC:2008 卫浴龙头-电子启闭卫生龙头

The purpose of the document is to define requirements for marking, identification, leaktightness, electrical and operational safety and mechanical resistance for sanitary tapware with opening and closing controlled electronically.The conditions for use for the supply system type are specified in Table 2.

Sanitary tapware - Electronic opening and closing sanitary tapware

NF D12-500:2008 淋浴间外壳.功能要求和试验方法

Shower enclosures - Functional requirements and test methods.

NF D12-500/IN1:2008 淋浴间外壳.功能要求和试验方法

Shower enclosures - Functional requirements and test methods.

DIN EN 12764:2008 卫生设备.旋涡浴池的规范

This standard specifies requirements for whirlpool baths, having a rated voltage of not more than 250 V for single phase appliances and 480 V for other appliances, which are intended to be installed in indoor domestic situations and used in accordance with the manufacturer's instructions for personal hygiene. Such whirlpool baths are tested and supplplied as a complete independent unit designed to be drained down after every use They may be transported in several separate parts, for assembly on site, to facilitate delivery. Safety aspects of Whirlpool baths (except use by young children and slow moving/weak elderly or disabled individuals) are covered by EN 60335-2-60. Exclusions: this standard does not cover additional requirements for whirlpool baths intended for uses where specific medical provisions are required, or whirlpool baths for communal uses where they are not drained down after every use. Portable whirlpool devices are not covered by this standard. For the purposes of this standard the term 'domestic situations' includes use in hotels, accommodation for students, hospitals and similar buildings. Warning: Slow moving elderly or disabled persons should take care when using whirlpool baths. Young children should not be allowed to use whirlpool baths without supervision. NOTE 1 It is unrealistic to expect manufacturers to provide a definition of what constitutes a 'slow moving elderly or disabled person', or 'young children'. The former is the responsibility of the individual or a career. The latter, is a parental responsibility. NOTE 2 When EN 60335-2-60 is amended to cover use of whirlpool baths by slow moving elderly or disabled persons and young children the warning given above will be deleted from this standard.

Sanitary appliances - Specification for whirlpool baths(includes Amendment A1:2008); English version of DIN EN 12764:2008-04

SANS 1509:2008 厕所冲水箱用冲水阀

Covers requirements for the construction and performance of four types and three sizes of flush valves for WC flushing cisterns.

Flush valves for WC flushing cisterns

QB/T 2948-2008 小便冲洗阀

pee flush valve

IEC 60335-2-105:2008 家用和类似用途电器.安全性.第2-105部分:多功能淋浴间的特殊要求

This clause of Part 1 is replaced by the following. This International Standard deals with the safety of electric multifunctional shower cabinets and electric separate multifunctional shower units for household and similar purposes, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. Appliances not intended for normal household use but which nevertheless may be a source of danger to the public, such as appliances intended to be used by laymen in hotels, fitness centres and similar locations, are within the scope of this standard. As far as is practicable, this standard deals with the common hazards presented by appliances that are encountered by all persons in and around the home. However, in general, it does not take into account – persons (including children) whose • physical, sensory or mental capabilities; or • lack of experience and knowledge prevents them from using the appliance safely without supervision or instruction; – children playing with the appliance. NOTE 101 Attention is drawn to the fact that – for appliances intended to be used in vehicles or on board ships or aircraft, additional requirements may be necessary; – in many countries additional requirements are specified by the national health authorities, the national water supply authorities, the national authorities responsible for the protection of labour and similar authorities. NOTE 102 If an appliance incorporates a part that is within the scope of IEC 60065, IEC 60598 or IEC 60950, the part is tested in accordance with the relevant standard as far as reasonable. NOTE 103 This standard does not apply to – instantaneous water heaters used for showering (IEC 60335-2-35); – shower-boost pumps (IEC 60335-2-41); – appliances intended for medical purposes; – appliances intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapour or gas).

Household and similar electrical appliances - Safety - Part 2-105: Particular requirements for multifunctional shower cabinets

DIN EN 997:2008 带整体放泄弯管的抽水马桶和整套抽水马桶

This standard specifies constructional and performance requirements together with test methods for close-coupled suites, one-piece and independent WC pans with integral trap used for personal hygiene manufactured from vitreous china or stainless steel. This standard does not apply to squatting toilettes, WC pans without integral trap, flushing cisterns as separate appliances. Flushing cisterns are covered by other standards and the reference to cisterns in this standard is related only to the definition and requirements of flushing volume.

WC pans and WC suites with integral trap(includes Amendment A1:2006); English version of DIN EN 997:2008-03

VDI 6000 Blatt 1-2008 提供和安装卫生设施 私人住宅

The document deals with the planning, design and installation of sanitary facilities such as bathrooms, cloakrooms, kitchens, laundry rooms and utility rooms in private housing. It applies to rented housing, owner-occupied housing and apartments in single-family and multiple-family dwellings.

Provision and installation of sanitary facilities - Private housing

IEC 60335-2-84:2002/AMD1:2008 家用和类似用途电器.安全性.第2-84部分:座便器的特殊要求.修改件1

This standard is Household and similar electrical appliances - Safety - Part 2-84: Particular requirements for toilets; Amendment 1.

Household and similar electrical appliances - Safety - Part 2-84: Particular requirements for toilets; Amendment 1

CNS 15167-2008 莲蓬头

Showerhead

DIN EN 15091 Berichtigung 1:2008 卫生陶器.电动开关卫生陶器.技术勘误DIN EN 15091-2007

Sanitary tapware - Electronic opening and closing sanitary tapware; German version EN 15091:2006, Corrigenda to DIN EN 15091:2007-03; German version EN 15091:2006/AC:2007

ASME A112.19.3-2008 不锈钢管子附件

1.1This Standard covers plumbing fixtures made of stainless steel alloys and specifies requirements formaterials, construction, performance, testing, and markings.Note: The term “corrosion-resisting steel” is also applied to stainless steel.1.2This Standard covers the following plumbing fixtures:(a) bathtubs;(b) bidets;(c) drinking fountains and water coolers;(d) lavatories;(e) shower bases;(f) urinals; and(g) sinks:(i) kitchen and bar sinks;(ii) laboratory sinks;(iii) laundry sinks;(iv) service sinks; and(v) utility sinks.1.3In this Standard, “shall” is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; “should” is used to express a recommendation or that which isadvised but not required; “may” is used to express an option or that which is permissible within the limitsof the standard; and “can” is used to express possibility or capability. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is toseparate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory)or informative (non-mandatory) to define their application.1.4 SI units are the units of record in Canada. In this Standard, the yard/pound units are shown in parentheses.The values stated in each measurement system are equivalent in application; however, each system is to beused independently. Combining values from the two measurement systems can result in non-conformancewith this Standard.All references to gallons are to U.S. gallons.For information on the unit conversion criteria used in this Standard, see Annex A.

Stainless Steel Plumbing Fixtures

ASME A112.19.2-2008 陶瓷管子附件

1.1This Standard covers vitreous and non-vitreous china plumbing fixtures and specifies requirements formaterials, construction, performance, testing, and markings. This Standard’s performance requirementsand test procedures apply to all types of water closets and urinals that discharge into gravity drainagesystems in permanent buildings and structures, independent of occupancy.1.2This Standard covers the following plumbing fixtures:(a) bathtubs;(b) bidets;(c) drinking fountains;(d) fixtures for institutional applications;(e) lavatories;(f) shower bases;(g) sinks:(i) laboratory sinks;(ii) laundry sinks;(iii) service sinks; and(iv) utility sinks;(h) urinals; and(i) water closets;1.3In this Standard, “shall” is used to express a requirement, i.e., a provision that the user is obliged to satisfyin order to comply with the standard; “should” is used to express a recommendation or that which is advised but not required; “may” is used to express an option or that which is permissible within the limitsof the standard; and “can” is used to express possibility or capability. Notes accompanying clauses do notinclude requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory)or informative (non-mandatory) to define their application.1.4 SI units are the units of record in Canada. In this Standard, the yard/pound units are shown in parentheses.The values stated in each measurement system are equivalent in application; however, each system is to beused independently. Combining values from the two measurement systems can result in non-conformance with this Standard.All references to gallons are to U.S. gallons.For information on the unit conversion criteria used in this Standard, see Annex B.

Ceramic Plumbing Fixtures

ASME A112.19.1-2008 搪瓷铸铁和搪瓷钢管子附件

1.1 This Standard covers enamelled cast iron and enamelled steel plumbing fixtures and specifiesrequirements for materials, construction, performance, testing, and markings.1.2 This Standard covers the following plumbing fixtures:(a) bathtubs;(b) drinking fountains and water coolers;(c) lavatories;(d) shower bases; and(e) sinks:(i) kitchen and bar inks;(ii) laundry sinks;(iii) service sinks; and(iv) utility sinks.1.3 In this Standard, “shall” is used to express a requirement, i.e., a provision that the user is obliged to satisfyin order to comply with the standard; “should” is used to express a recommendation or that which isadvised but not required; “may” is used to express an option or that which is permissible within the limitsof the standard; and “can” is used to express possibility or capability. Notes accompanying clauses do notinclude requirements or alternative requirements; the purpose of a note accompanying a clause is toseparate from the text explanatory or informative material. Notes to tables and figures are considered partof the table or figure and may be written as requirements. Annexes are designated normative (mandatory)or informative (non-mandatory) to define their application.1.4SI units are the units of record in Canada. In this Standard, the yard/pound units are shown in parentheses.The values stated in each measurement system are equivalent in application; however, each system is to beused independently. Combining values from the two measurement systems can result in non-conformancewith this Standard.All references to gallons are to U.S. gallons.For information on the unit conversion criteria used in this Standard, see Annex A.

Enamelled Cast Iron and Enamelled Steel Plumbing Fixtures

ANSI/ASME A112.19.3-2008 不锈钢管紧固件

This Standard covers plumbing fixtures made of stainless steel alloys and specifies requirements for materials, construction, performance, testing, and markings. Note: The term "corrosion-resisting steel" is also applied to stainless steel.

Stainless Steel Plumbing Fixtures

ASME A112.19.8a Addenda-2008 游泳池、浅水池、温泉浴场和热水浴缸使用的抽吸配件.勘误表

This document establishes materials, testing, and marking requirements for suction fittings that are designed to be totally submerged for use in swimming pools, wading pools, spas, and hot tubs, as well as other aquatic facilities.

Suction Fittings for Use in Swimming Pools, Wading Pools, Spas, and HotTubs; Addenda