91.140.90 电梯、自动扶梯 标准查询与下载

PN-EN 115-2-2021-09 E 自动扶梯和自动人行道安全 第2部分：现有自动扶梯和自动人行道安全改进规则

Safety of escalators and moving walks -- Part 2: Rules for the improvement of safety of existing escalators and moving walks

T/ZZB 2475-2021 曳引驱动洁净电梯

本文件规定了曳引驱动洁净电梯的术语和定义、基本要求、技术要求、试验方法、检验规则、标志、包装、运输、贮存与技术档案、质量承诺。 本文件适用于安装在医药卫生、微电子制造、精密制造等有洁净要求的环境内，具有洁净功能的且额定速度不大于 2.5 m/s 的曳引驱动洁净电梯（以下简称洁净电梯）。

Traction clean lift

DB34/T 4006-2021 电梯物联网应急处置规范

Elevator Internet of Things Emergency Disposal Specifications

EN 81-22:2021 电梯建造和安装的安全规则 人员和货物运输用电梯 第22部分：带有倾斜运行路径的乘客和货物乘客电梯

Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 22: Passenger and goods passenger lifts with inclined travel path

DB4105/T 165-2021 电梯维护保养服务规范

Elevator Maintenance Service Specifications

KS B 6885-2021 电梯用橡胶隔振器

Rubber vibration isolators for elevator

T/CCMA 0116-2021 施工升降机使用说明书编写导则

本文件确立了GB/T 26557定义的施工升降机的使用说明书结构、基本规定和编制方法，规定了组成施工升降机使用说明书的主要章节，并规定了各章节的名称、层次、要素的编写和表述规则以及编排格式。其他型式的施工升降机可参照执行。 本标准适用于编制施工升降机的使用说明书。

Guidelines for builder’s hoist instruction manual

DB3205/T 1022-2021 电梯无纸化维保工作规范

Elevator paperless maintenance work specification

T/FCEAS 007-2021 施工升降机滑触线输电技术应用标准

1.总则 2.术语 3.基本规定 4.安装与拆卸 5.维护与保养

Sliding contact line electricity transmission technology standard for building hoist

T/ZJASE 009-2021 既有住宅加装电梯使用管理 与维护保养规则

既有住宅加装电梯，是我省近年来的一项重点民生工程，也是满足人民日益增长的美好生活需要的便民利民措施。2016年4月，浙江省建设厅、发改委、公安厅等9部门联合下发《关于开展既有住宅加装电梯试点工作的指导意见》，于2016年5月1日起执行。截止2020年12月，我省已有2775台老旧住宅电梯加装完毕，并有数量可观的住宅在电梯加装施工中。作为新生事物，老旧住宅加装电梯相比于普通乘客电梯有其特殊性，我国目前在执行的《特种设备使用管理规则》和《电梯维护保养规则》中没有给出针对性的项目条款，给使用管理和维护保养带来一些难题，如日常无人管理、部门联审技术资料缺失、直接入户电梯救援通道关闭等管理问题，更是出现了“浅底坑”、积木式电梯等技术难题。本项目旨在解决这一问题，制定适用于既有住宅加装电梯的使用管理和维护保养的安全标准，引导相关电梯单位的施工、维保和使用管理工作，提高加装电梯的安全性和适用性。 因此，针对既有住宅加装电梯的新情况、新技术，充分调研产品信息，听取生产和使用的各方意见，制定《既有住宅加装电梯使用管理和维护保养规则》，解决以上这些问题，科学指导电梯使用管理单位、维护保养单位的工作，具有十分重要的意义。

Service administration and maintenance regulation of elevators installed in existing residences

DB13/T 5412-2021 杂物电梯维护保养年度自行检查规范

Specifications for annual self-inspection of debris elevator maintenance

DB13/T 5411-2021 液压电梯维护保养年度自检规范

Hydraulic elevator maintenance annual self-inspection specification

T/ZZB 2155-2021 电梯用永磁同步门机

本文件规定了电梯用永磁同步门机的术语和定义、分类及使用环境、基本要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存、质量承诺。 本文件适用于以交（直）流稀土永磁同步电机为动力，以同步带传动、变频无级调速控制技术驱动的可实现门扇关闭和开启的装置。

Permanent magnet synchronous door operator for elevator

LST EN 115-2-2021 自动扶梯和自动人行道的安全 第2部分：现有自动扶梯和自动人行道的安全改进规则

Safety of escalators and moving walks - Part 2: Rules for the improvement of safety of existing escalators and moving walks

OENORM EN 81-70/A1-2021 电梯建造和安装的安全规则 乘客和货物乘客电梯的特殊应用 第70部分：包括残疾人在内的电梯的无障碍性（修正案）

Safety rules for the construction and installation of lifts - Particular applications for passenger and goods passenger lift - Part 70: Accessibility to lifts for persons including persons with disability (Amendment)

DB65/T 4406-2021 既有住宅加装电梯检验技术规范

Technical specification for inspection of elevators installed in existing residential buildings

GSO ISO 25745-3:2021 电梯、自动扶梯和自动人行道的能源性能 第3部分：自动扶梯和自动人行道的能源计算和分类

ISO 25745-3:2015 specifies generic tools for estimating energy consumption of escalators and moving walks, and a consistent method for energy performance classification of existing, modernized, or new escalators and moving walks. It considers the energy performance during the operational portion of the life cycle of escalators and moving walks. It does not cover energy consumption and classification of the ancillary equipment, such as the following: a) lighting with the exception of comb plate lighting, step gap lighting, and traffic light (comb plate lighting, step gap lighting, and traffic light are considered essential for the operation of the equipment and are therefore not defined as ancillary equipment); b) cooling and heating and machine room ventilation; c) alarm devices and emergency battery supplies equipment, etc.; d) environmental conditions; e) consumption through the power sockets. There can be other electrical loads not associated with the escalator or moving walk, and not included. ISO 25745-3:2015 considers all escalators and inclined moving walks up to a rise of 8 m and horizontal moving walks with a length up to 60 m (this represents about 85 % of worldwide installed units).

Energy performance of lifts, escalators and moving walks — Part 3: Energy calculation and classification of escalators and moving walks

GSO ISO 22201-1:2021 电梯、自动扶梯和自动人行道 安全相关应用中的可编程电子系统 第1部分：电梯 (PESSRAL)

ISO 22201-1:2017 is applicable to the product family of passenger and goods/passenger lifts used in residential buildings, offices, hospitals, hotels, industrial plants, etc. This document covers those aspects that it is necessary to address when programmable electronic systems are used to carry out electric safety functions for lifts (PESSRAL). This document is applicable for lift safety functions that are identified in lift codes, standards or laws that reference this document for PESSRAL. The SILs specified in this document are understood to be valid for PESSRAL in the context of the referenced lift codes, standards and laws in Annex B. NOTE Within this document, the UK term "lift" is used throughout instead of the US term "elevator". ISO 22201-1:2017 is also applicable for PESSRAL that are new or deviate from those described in this document. The requirements of this document regarding electrical safety/protective devices are such that it is not necessary to take into consideration the possibility of a failure of an electric safety/protective device complying with all the requirements of this document and other relevant standards. In particular, this document a) uses safety integrity levels (SIL) for specifying the target failure measure for the safety functions implemented by the PESSRAL; b) specifies the requirements for achieving safety integrity for a function but does not specify who is responsible for implementing and maintaining the requirements (for example, designers, suppliers, owner/operating company, contractor); this responsibility is assigned to different parties according to safety planning and national regulations; c) applies to PE systems used in lift applications that meet the minimum requirements of a recognized lift standard such as EN 81, ASME A17.1-2007/CSA B44-07, or lift laws such as the Japan Building Standard Law Enforcement Order For Elevator and Escalator; d) defines the relationship between this document and IEC 61508 and defines the relationship between this document and the EMC standard for lifts on immunity, ISO 22200; e) outlines the relationship between lift safety functions and their safe-state conditions; f) applies to phases and activities that are specific to design of software and related hardware but not to those phases and activities that occur post-design, for example sourcing and manufacturing; g) requires the manufacturer of the PESSRAL to provide instructions that specify what is necessary to maintain the integrity of the PESSRAL (instruction manual) for the organization carrying out the assembly, connections, adjustment and maintenance of the lift; h) provides requirements relating to the software and hardware safety validation; i) establishes the safety integrity levels for specific lift safety functions; j) specifies techniques/measures required for achieving the specified safety integrity levels; k) provides risk-reduction decision tables for the application of PESSRALs; l) defines a maximum level of performance (SIL 3) that can be achieved for a PESSRAL according to this document and defines a minimum level of performance (SIL 1). ISO 22201-1:2017 does not cover: - hazards arising from the PE systems equipment itself, such as electric shock, etc.; - the concept of fail-safe, which can be of value when the failure modes are well defined and the level of complexity is relatively low; the concept of fail-safe is considered inappropriate because of the full range of complexity of the PESSRAL that are within the scope of this document; - other relevant requirements necessary for the complete application of a PESSRAL in a lift safety function, such as the mechanical construction, mounting and labelling of switches, actuators, or sensors that contain the PESSRAL. It is necessary that these requirements be carried out in accordance with the national lift standard that references this document. - foreseeable misuse involving security threats related to malevolent or unauthorized action. In cases where a security threat analysis needs to be considered, this standard may be used, provided the specified SIL has been reassessed.

Lifts (elevators), escalators and moving walks — Programmable electronic systems in safety-related applications — Part 1: Lifts (elevators) (PESSRAL)

GSO ISO 25745-2:2021 电梯、自动扶梯和自动人行道的能源性能 第2部分：电梯的能源计算和分类

ISO 25745-2:2015 specifies a method to estimate energy consumption based on measured values, calculation, or simulation, on an annual basis for traction, hydraulic and positive drive lifts on a single unit basis, and an energy classification system for new, existing, and modernized traction, hydraulic, and positive drive lifts on a single unit basis. It applies to passenger and goods passenger lifts with rated speeds greater than 0,15 m/s and only considers the energy performance during the operational portion of the life cycle of the lifts. For other types of lifts (e.g. service lifts, lifting platforms, etc.), it can be taken as a reference. It does not cover energy aspects, which affect the measurements, calculations, and simulations, such as the following: hoistway lighting; heating and cooling equipment in the lift car; machine room lighting; machine room heating, ventilation, and air conditioning; non-lift display systems, CCTV security cameras, etc.; non-lift monitoring systems (e.g. building management systems, etc.); effect of lift group dispatching on energy consumption; environmental conditions; consumption through the power sockets; lifts whose travel includes an express zone (an express zone is unlikely to affect the average car load but can significantly affect the average travel distance).

Energy performance of lifts, escalators and moving walks — Part 2: Energy calculation and classification for lifts (elevators)

GSO ISO/TR 8100-24:2021 电梯（电梯）安全要求 第24部分：电梯要求的趋同

ISO/TR 8100-24:2016 provides a comparison of the requirements for door locks, buffers, governors, safeties and brakes covered by the major prescriptive safety standards: a) CEN EN 81‑1:1998+A3:2009; b) ASME A17.1-2010/CSA B44-10; c) JIS TS A 0028-1:2011; d) The Building Standard Law of Japan. It also includes prescriptive recommendations to harmonize the requirements within those standards.

Safety requirements for lifts (elevators) — Part 24: Convergence of lift requirements