91.140.90 电梯、自动扶梯 标准查询与下载

T/YCDT 001-2020 智慧电梯应急管理系统通用要求

本标准主要以实现电梯安全智慧监管为目的，从智慧电梯系统的实用性出发，规定了智慧电梯系统主要功能要求以及对应的技术要求，并提出了应用在智慧监管方面的管理要求。包括术语及定义、监测终端要求、显示屏要求、手机应用要求、传输网络要求、三级应急救援机制、无纸化维保等内容。

General requirements for intelligent elevator emergency management system

T/GDJSKB 001-2020 智能施工升降机

二、标准编制原则和确定团体标准主要内容 1、标准编制原则 1）本文件的编写符合GB/T 1.1及GB/T 20001.10的规定； 2）工作组内企业对修订内容进行多次征求意见，并在会上充分讨论； 3）起草过程充分考虑国内外现有相关标准的统一和协调； 4）标准的要求充分考虑了国内当前的行业技术水平。 2、标准主要内容 本文件规定了智能施工升降机的标记、要求、试验方法、检验规则、标志和随行文件、随机备件、包装、运输和贮存。 本文件适用于建筑施工用齿轮齿条式智能施工升降机，其主要特征是具备安全监控功能，升降机能自动响应楼层按钮信号和笼内选层按钮信号，并在这些信号指定的层站平层停靠和自动开关门；也可通过垂直物流调度系统，实现升降机与机器人的双向通讯，升降机能获取机器人乘梯点位信息，响应机器人乘梯楼层指令，并自动在这些指令指定的层站平层停靠和自动开关门。本产品适用于人货两用或智能建筑机器人的运载。 1）术语和定义：本文件统一规范智能施工升降机、运行模式、自动平层、垂直物流调度系统、智能建筑机器人的定义。  2）标记：本文件使用的产品传动方式为齿轮齿条传动。 3）要求： ——对产品的环境条件、电源、外观质量等提出一般性技术要求。 ——根据产品的特点，规定了自动运行和智能运行功能及平层精度的要求 ——安全要求：智能施工升降机是在普通施工升降机的基础上进行了自动化和智能化升级，与普通施工升降机的主要不同点在于：自动运行、自动开关门、自动平层停靠、以及能实现机器人与升降机的通信交互的垂直物流调度系统。本文件的安全技术要求主要参考GB/T 26557-2011中第5章的内容，对于不同点（自动门）层站入口、吊笼以及控制方式进行了修改采用，门区的安全技术要求主要参考GB 7588的相关要求。正常控制方式根据产品特点分为自动运行控制模式（采用电气控制方式）和智能运行控制模式（无线控制方式），并参考GB/T 37537-2019增加了相关安全监控技术要求。 ——试验方法：本文件结合GB/T 26557-2011的设计验证项目和产品新功能验证项目做出了相应的验证方法，并对“层门门锁装置”、“超速安全装置和限速器”、“线性储能型缓冲器和耗能型缓冲器”重要部件要求进行特别验证。 ——检验规则：本文件产品检验分为出厂检验和型式检验。出厂检验包括了主要的功能验证项目。型式检验包括了本文件的所有技术要求项目。 ——标志和随行文件、随机备件：本文件参照GB/T 26557-2011中第7章要求使用信息，并增加对随行文件的要求。 ——包装、运输和贮存：本文件参考GB/T 10054-2005中第8章内容对包装、运输和贮存提出要求。 3、解决的主要问题 在未来由建筑机器人建造楼房的环境里，建筑机器人跨楼层作业需要通过施工升降机的运载。目前建筑中常用的施工升降机为人货两用升降机，自动化控制水平比较低，须通过司机操作，不便于工地人员的使用，同时对实现建筑机器人无障碍垂直通行造成一定的困难，不便于智慧工地的营运。主要为以下几点：1.现有施工升降机吊笼门与层门需要由操作员手动打开与关闭；2.现有施工升降机由司机手动操作，平层（吊笼底与楼层水平对齐）效果只能通过人眼判断，如果平层误差太大会导致机器人无法跨越；3.现有施工升降机是通过在各个楼层里安装呼叫器，然后由司机判断，操作升降机到达对应楼层，这种人工响应方式在有多呼叫请求时，运输效率较低；4.升降机不能与机器人互动，实现智能建筑机器人自主乘梯。 智能施工升降机在传统的施工升降机基础上进行了自动化改造、智能化升级。有效地解决上述问题，从而清除建筑机器人在楼房垂直通道的障碍、提高施工升降机运输效率。智能施工升降机配置自动门，可响应楼层外呼和笼内选层指令，或通过垂直物流调度系统响应机器人的用梯请求，并在指定楼层自动平层停靠。 智能施工升降机在保留传统施工升降机的安全性能的前提下，增加多道主动安全防护的安全措施，保证了升降机运行的安全性和可靠性，同时也降低或解放了升降机司机的工作强度或劳动力。 本文件的制定和实施，将为行业管理部门提供技术支撑，引导终端生产企业生产满足行业需求的智能施工升降机。 标准实施项目属于重大科技成果转化、引导产业创新发展等方面关键核心技术标准项目，具有显著社会效益和经济效益。智能施工升降机标准的制定能推动施工升降机自动化控制的广泛应用；有效打通垂直物流通道，实现机器人自主乘梯，推进智慧工地运营；大幅提升运行质量和运行效率，解放或降低司机的劳动强度；具有巨大的经济效益和社会效益。

Intelligent builders hoist

EN 81-72:2020 电梯建造和安装的安全规则.客运和货运电梯的特殊使用.第72部分:消防队员升降机

1.1 This document specifies the additional or deviating requirements to EN 81-20:2020 for new passenger and goods passenger lifts, which can be used for firefighting and evacuation purposes under firefighters control. 1.2 This document applies, when the following conditions are fulfilled: - the lift well and the lift environment are designed to restrict the ingress of fire, heat and smoke to the lift well, machinery spaces and safe areas; - the building design limits the flow of water into the lift well; - the firefighters lift is not used as an escape route; - the lift well and the lift environment are fire protected for at least to the same level as the building structure; - the power supply is secure and reliable; - the electrical cable(s) providing power to the lift is fire protected to the same fire protection level as given to the lift well structure; - a suitable maintenance and verification plan is implemented. 1.3 This document does not cover: - the use of lifts with partially enclosed wells for use as firefighters lifts; - lifts installed in new or existing buildings, which are not included in fire resisting building structure; - important modification to existing lifts. 1.4 This document does not define: - the number of firefighters lifts and the floors to be served during firefighting operations; - size of safe area(s); - the use of other than the highest deck of a multi deck lift for firefighting operations. 1.5 This document deals with the significant hazards, hazardous situations and events relevant to firefighters lifts (as listed in Clause 4) when they are used as intended and under the conditions as foreseen by the installer. 1.6 The following significant hazards are not dealt with in this document and are assumed to be addressed by the building designer: - not having enough or correctly located firefighters lifts to move the firefighters up the building; - a fire in the firefighters lift well, safe area, machinery space or car; - the absence of building floor identification signs at any floor; - water management is not operating correctly.

Safety rules for the construction and installation of lifts - Particular applications for passenger and goods passenger lifts - Part 72: Firefighters lifts

DB37/T 4020.3-2020 既有住宅加装装配式电梯 第3部分：维护管理规范

Prefabricated elevators installed in existing residences Part 3: Maintenance management specifications

DB37/T 4020.1-2020 既有住宅加装装配式电梯 第1部分：技术条件

Prefabricated Elevators for Existing Residential Buildings Part 1: Technical Conditions

DB37/T 4020.2-2020 既有住宅加装装配式电梯 第2部分：安装技术规范

Prefabricated elevators installed in existing residences Part 2: Technical specifications for installation

T/GZBC 35-2020 电梯智能光幕系统

本标准规范了电梯智能光幕系统的术语和定义、型号命名、一般技术要求、安全性、环境适应性、抗干扰性、性能指标、安装要求、试验方法、生产检测与包装、紧急操作、故障与检修要求等内容。

Elevator safety curtain control system

BS ISO 8102-1:2020 电梯、自动扶梯和自动人行道的电气要求 排放方面的电磁兼容性

What is ISO 8102-1 about?    ISO 8102 discusses electrical requirements for lifts, escalators and moving walks. ISO 8102-1 is the first part of the ISO 8102 multi-series, and discusses electromagnetic compatibility for such electrical equipment. ISO 8102-1 specifies the emission limits in relation to electromagnetic disturbances and test conditions for lifts, escalators and moving walks, which are intended to be permanently installed in buildings.    It is possible, however, that these limits do not provide full protection against disturbances caused to radio and TV reception when such equipment is used within distances given in ISO 8102-1 .   No...

Electrical requirements for lifts, escalators and moving walks - Electromagnetic compatibility with regard to emission

T/JSQA 024-2020 电梯T型导轨

制造与材料:符号与单位、制造、原材料； 技术特性与尺寸公差：命名规则、长度、尺寸、安装连接板的加工面、导轨的导向面形状、表面粗糙度、经机械加工的边缘、导轨上的孔、几何公差、连接板。

Guide rails for lifts—T-type

DB34/T 3619-2020 电梯曳引能力综合测试规范

Comprehensive test specification for elevator traction capacity

ISO 8102-1:2020 电梯 自动扶梯和移动步道的电气要求 - 第1部分:与排放有关的电磁兼容性

This document specifies the emission limits in relation to electromagnetic disturbances and test conditions for lifts, escalators and moving walks, which are intended to be permanently installed in buildings. It is possible, however, that these limits do not provide full protection against disturbances caused to radio and TV reception when such equipment is used within distances given in Table 1. This document is not applicable for apparatus which are manufactured before the date of its publication

Electrical requirements for lifts, escalators and moving walks — Part 1: Electromagnetic compatibility with regard to emission

T/WDTXH 4-2020 电梯标志和标识

本标准规定了电梯标志和标识的术语和定义、基本要求、内容和样式、固定方式及制作、安装和维护。 本标准适用于包括载人（货）电梯、自动扶梯、自动人行道的标志和标识。 电梯的标志和标识的设置应符合GB 7588-2003 中15.1、TSG T5002的基本要求。自动扶梯和自动人行道的标志和标识的设置应符合GB 16899-2011 中7.2.1.1、TSG T5002的基本要求。

Elevator Signs and Signage

T/WDTXH 5-2020 梧州市电梯安装维修工比赛技术规范

本标准规定了电梯安装维修工技术比赛的术语和定义、基本要求、评定规则、比赛成绩报告。  本标准适用于曳引驱动电梯、自动扶梯和自动人行道的安装维修工技术比赛。 1.规定评定人员要求 、评定实施条件、评定现场条件 等； 2.电梯维护保养质量根据现场评价情况的优劣分为Ⅰ、Ⅱ、Ⅲ、Ⅳ四个等级； 3.16道评定试题等。

Wuzhou City Elevator Installation and Maintenance Workers Competition Technical Specifications

ISO 8100-32:2020 人和货物运输用电梯.第32部分:安装在办公、酒店和住宅建筑中的客梯的规划和选择

This document covers traffic planning and selection of new passenger lift installations in office, hotel and residential buildings. The requirements and recommendations given are applicable to both simple and complex lift installations. This document gives guidance to select the most appropriate method of traffic planning for each case within the scope. This document permits the number and configuration of lifts and their main characteristics to be determined at the early stages of building design, provided that the size and intended use of the building is known. This document is applicable to lifts classified according to Table 1. Table 1 — Classification of lifts according to ISO 8100-30 Class Purpose Class I Lifts designed for the transport of persons Class II Lifts designed mainly for the transport of persons but in which goods can be carried Class VI Lifts designed to suit buildings with intensive traffic, i.e. lifts with speeds of 2,5 m/s and above This document is applicable to mixed use buildings provided that the mixed use can be evaluated separately as either office, residential or hotel use. This document proposes a standardized method of lift traffic planning. Alternative methods can be valid but are not in the scope of this document. This document gives basic requirements and recommendations as part of the planning and selection of lift(s) relating to: a) the design criteria to be evaluated; b) the values of design criteria to be used; c) a calculation method (see Clause 7) to be used as part of simple planning and selection of lifts (5.3); d) a simulation method (see Clause 8) to be used as part of simple and more complex planning and selection of lifts (5.3); e) output report format of lift planning and selection analysis to be provided to interested parties; f) consideration of existing safety standards and cultural norms for determining the number of persons that can fit into a specific size of car2); g) accommodation for luggage, bicycles, prams, etc., or other non-personal items that can be transported with passengers in the lifts; h) accessibility for persons with disabilities. 2) The European Lift Directive 2014 refers to the car as a carrier.  This document does not address: i) the transportation of goods only; j) the transportation of passengers using multiple cars sharing a single hoist way; k) the transportation of passengers using double deck systems; l) terminal to terminal travel in excess of 200 m and/or rated speed above 7 m/s; m) variations to the calculation method (e.g. traffic conditions other than uppeak, door dwell time definitions, unequal floor heights, unequal floor populations, speed not being reached in one floor jump, etc.); n) variations to the simulation method (e.g. passenger batches or traffic templates with variable passenger demand); o) design of simulator models or traffic control systems; p) advanced passenger features (e.g. walking speed); q) performance verifications of the design after installation.

Lifts for the transportation of persons and goods — Part 32: Planning and selection of passenger lifts to be installed in office, hotel and residential buildings

DB52/T 1500-2020 曳引驱动电梯节能改造技术要求及验收规范

Technical requirements and acceptance specifications for energy-saving renovation of traction drive elevators

KS B ISO TS 25740-1-2020 自动扶梯和自动人行道的安全要求.第1部分:全球基本安全要求

Safety requirements for escalators and moving walks —Part 1: Global essential safety requirements(GESRs)

KS B ISO TS 8103-6-2020 自动扶梯和移动步道 - 第6部分:符合GESR的安全参数

Escalators and moving walks —Part 6: Safety parameters meeting the GESRs

KS B ISO TS 25740-1:2020 自动扶梯和自动人行道的安全要求.第1部分:全球基本安全要求

Safety requirements for escalators and moving walks —Part 1: Global essential safety requirements(GESRs)

KS B ISO TS 8100-21-2020 运输人员和货物的升降机 - 第21部分:符合全球基本安全要求（GESR）的全球安全参数（GSP）

Lifts for the transport of persons and goods —Part 21: Global safety parameters(GSPs) meeting the global essential safety requirements(GESRs)

KS B ISO TS 8100-21:2020 运输人员和货物的升降机 - 第21部分:符合全球基本安全要求（GESR）的全球安全参数（GSP）

Lifts for the transport of persons and goods —Part 21: Global safety parameters(GSPs) meeting the global essential safety requirements(GESRs)