91.160.01 照明综合 标准查询与下载

JG/T 530-2017 导光管采光装置

Light pipe lighting device

KS C 8015-2017(2022) 一般照明用碳纳米管（CNT）面板－性能要求

Carbon nanotube(CNT) panel for general lighting－Performance requirements

KS C 0075-2017 方法指定光源显色性

Method of specifying colour rendering properties of light sources

KS C 0075-2017(2022) 光源显色特性的规定方法

Method of specifying colour rendering properties of light sources

KS C 8015-2017 一般照明用碳纳米管（CNT）板性能要求

Carbon nanotube(CNT) panel for general lighting－Performance requirements

T/CIES 002-2016 照明工程设计收费标准

室内照明工程设计收费标准、专项照明工程设计收费标准、室外照明工程设计收费标准等。

Charging standard for lighting engineering design

BS ISO 10916:2014 照明用最终净能源需求日光利用率影响的计算

Calculation of the impact of daylight utilization on the net and final energy demand for lighting

ISO 10916:2014 照明用最终净能源需求日光利用率影响的计算

This International Standard defines the calculation methodology for determining the monthly and annual amount of usable daylight penetrating non-residential buildings through vertical facades and rooflights and the impact thereof on the energy demand for electric lighting. This International Standard can be used for existing buildings and the design of new and renovated buildings. This International Standard provides the overall lighting energy balance equation relating the installed power density of the electric lighting system with daylight supply and lighting controls (proof calculation method). The determination of the installed power density is not in the scope of this method, neither are controls relating, for instance, to occupancy detection. Provided the determination of the installed power density and control parameters using external sources, the internal loads by lighting and the lighting energy demand itself can be calculated. The energy demand for lighting and internal loads by lighting can then be taken into account in the overall building energy balance calculations: — heating; — ventilation; — climate regulation and control (including cooling and humidification); — heating the domestic hot-water supply of buildings. For estimating the daylight supply and rating daylight-dependent artificial lighting control systems, a simple table-based calculation approach is provided. The simple method describes the division of a building into zones as required for daylight illumination-engineering purposes, as well as considerations on the way in which daylight supplied by vertical facade systems and rooflights is utilized and how daylight-dependent lighting control systems effect energy demand. Dynamic vertical facades with optional shading and light redirection properties are considered, i.e. allowing a separate optimization of facade solutions under direct insolation and under diffuse skies. For rooflighting systems standard, static solutions like shed rooflights and continuous rooflights are considered. The method is applicable for different latitudes and climates. For standard building zones (utilizations), operation times are provided. For detailed computer-based analysis (comprehensive calculation), minimum requirements are specified. To support overall building performance assessment, additional daylight performance indicators on the overall building level are provided.

Calculation of the impact of daylight utilization on the net and final energy demand for lighting

DIN VDE 0100-559:2014 低压电气装置.第5-559部分:电气设备的选择与安装.其他电气设备.灯具和照明装置(IEC 60364-5-55-2001(第559款),修订本).德文实施版本60364-5-559-2012

Low-voltage electrical installations - Part 5-559: Selection and erection of electrical equipment - Luminaires and lighting installations (IEC 60364-5-55:2011 (Clause 559), modified); German implementation HD 60364-5-559:2012

DB21/T 2205-2013 LED照明工程安装与质量验收规程

LED lighting engineering installation and quality acceptance procedures

ANSI Z21.42-2013 燃气照明设备标准

Standard for Gas-Fired Illuminating Appliances

ANSI N43.4-2013 放射性自发光光源的分类

Classification of Radioactive Self-Luminous Light Sources

ANSI/IESNA RP-7-2012 照明工业设施的推荐实施规程

A comprehensive treatment of lighting in the industrial environment. It provides guidance to achieve efficient, reliable and easily maintainted lighting systems.

Recommended Practice for Lighting Industrial Facilities

KS C 8014-2011(2021) 一般照明用碳纳米管（CNT）面板－安全要求

Carbon nanotube(CNT) panel for general lighting－Safety requirements

KS C 8017-2011(2016) 普通照明用OLED面板

OLED panels for general lightings－Performance requirements

KS C 8014-2011(2016) 一般照明用碳纳米管（CNT）板安全要求

Carbon nanotube(CNT) panel for general lighting－Safety requirements

JIS Z 9110 AMD 1:2011 推荐照明等级的一般规则(修改件1)

General rules of recommended lighting levels (Amendment 1)

SNI 6197-2011 照明系统中的节能

Konservasi energi pada sistem pencahayaan

JIS Z 9110:2010 照明度推荐性通用规则

This Standard specifies the general rules of lighting design standard and lighting requirments to provide people with lighting,principally, artificial lighting, under which they can engage in various activities with safety, easiness and comfort.

General rules of recommended lighting levels

ASTM F2201-10 实用打火机标准消费者安全规范

1.1 This consumer safety specification covers all flame-producing consumer products commonly known as utility lighters (also known as grill lighters, fireplace lighters, lighting rods, or gas matches) and such similar devices as defined in 3.1.14. Matches are specifically excluded from this specification; flame-producing products intended for igniting cigars, pipes, and cigarettes are also specifically excluded from this safety specification and are covered in Consumer Safety Specification F400. 1.2 This specification establishes requirements for utility lighters to ensure a reasonable degree of safety for normal use and reasonably foreseeable misuse of such utility lighters by users. 1.3 Utility lighters, being flame-producing devices, can, as can all flame sources, present a potential hazard to the user. This specification cannot eliminate all hazards, but it is intended to minimize potential hazards of utility lighters to users. 1.4 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.5 All utility lighters are subject to the mandatory child resistance requirements found at 16 CFR Part 1212 and the labeling requirements found at 16 CFR Part 1500. See Annex A2. 1.6 The following precautionary caveat pertains only to the test methods portion, Section 8, of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.

Standard Consumer Safety Specification for Utility Lighters