91.190 建筑附件 标准查询与下载

GOST 31471-2011 恐慌和紧急出口装置.规格

Panic and emergency exit devices. Specifications

EN 13126-2:2011 建筑五金.门窗高度窗要求及试验方法.第2部分:窗撑柄

This European Standard specifies requirements and test methods for durability, strength, security and functionality of window fastener handles.This European Standard does not apply to the following hardware: a) handles-primarily for Tilt & Turn, Tilt-First and Turn-Only hardware, refer to EN 13126-3; b) electromechanical hardware.

Building hardware - Requirements and test methods for windows and doors height windows - Part 2: Window fastener handles

EN 13126-1:2011 为窗和门的高度构建硬件,硬件需求和测试方法.第1部分:常见的所有类型的硬件需求

This European Standard specifies performance requirements for the strength and durability of hardware for the operation of movable sashes of windows and door height windows including requirements and test methods common to all hardware.This European Standard is applicable to the hardware suitable for windows and door height windows in Table 1, whatever the material used for the construction of the window.This European Standard does not apply to the following: Fusible links, hardware for lifting side-hung windows, fixing devices that are used to assemble or install a fixed window, devices that are used for the permanent fixing of a complete window into a building structure, mechanisms for the pneumatic or hydraulic remote operation of windows; also single axis hinges (other than those, which provide a pivot-function for windows) and dead bolts suitable for both door and window sashes, as covered in EN 1935 and EN 12051 respectively. NOTE 1 If fire/smoke resistance is required, reference should be made to the respective standards mentioned in 5.5. NOTE 2 If burglar resistance is required, reference should be made to EN 1627, EN 1628, EN 1629 and EN 1630.

Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 1: Requirements common to all types of hardware

EN 13126-5:2011 建筑五金件 窗和门高窗的五金件 要求和实验方法 第5部分:限制窗和门高窗开放的设备

This part of EN 13126 specifies requirements and test methods for durability, strength, security and functionality of devices that restrict the opening of windows and door height windows. NOTE 1 Restrictors and reverse restrictors can be either a separate item of hardware or an integral part of hardware, for example a part of the operating gear or an integral part of a hinge. NOTE 2 Windows may be fitted with more than one restrictor. NOTE 3 The requirements included withinThis standard take the needs for child safety into consideration, child protective window restrictors intended to be installed by the end consumers are beyond the scope of this standard. Therefore, for the DIY market refer to PC398 and prEN 16281.

Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 5: Devices that restrict the opening of windows and door height windows

ANSI/BHMA A156.2-2011 已钻孔及预装配门锁及其锁舌

This Standard establishes performance requirements for bored and preassembled locks and latches, and includes cycle tests, strength tests, operational tests, security tests, material evaluation tests, finish tests, and dimensional criteria.

Bored and Preassembled Locks and Latches

EN 13126-3:2011 建筑五金.窗和落地窗用建筑五金.要求和试验方法.倾斜和旋转,先倾斜和只旋转的五金手柄

This part of EN 13126 specifies the requirements and test procedures for durability, strength, security and functionality of handles. This European Standard is applicable to Tilt&Turn, Tilt-First and Turn-Only hardware for use on windows and door-height windows. Handles may also be used on other opening types, e. g. on In-line Sliding, Tilt&Slide, Fold&Slide, horizontal and vertical-pivoting windows. This European Standard is not applicable to the following hardware:a) operation devices and door handles for door latches and door locks (refer to EN 1906); b) handles with handle length > 170 mm (refer to Figure B.1); c) electromechanical hardware.

Building hardware - Hardware for windows and door-height windows - Requirements and test methods - Part 3: Handles, primarily for Tilt&Turn, Tilt-First and Turn-Only hardware

JG/T 290-2010 建筑疏散用门开门推杠装置

本标准规定了建筑疏散用门开门推杠装置的术语和定义、分类、代号和标记、要求、试验方法、检验规则、标志、包装、运输、贮存。 本标准适用于-10℃～60℃环境下的建筑疏散用门开门推杠装置，其他疏散用门开门推杠装置可参考使用。

Panic devices operated by a horizontal bar for building exit doors

DIN EN 1906:2010 建筑五金件.杠杆式门拉手和旋钮装置.试验方法和要求.德文版本EN 1906-2010

Building hardware - Lever handles and knob furniture - Requirements and test methods; German version EN 1906:2010

DIN 18650-1:2010 电动人行门.第1部分:产品要求和试验方法

This standard contains requirements regarding design and test methods for drive units, leaves and components of powered doors in pedestrian areas. Such door constructions may be operated electro-mechanically, electro-hydraulically or pneumatically. Doors can be of sliding, hinged and revolving type with a horizontally moved leaf. Powered pedestrian doors might be used at entrances, in interior locations, in escape routes and emergency exits, as well as on smoke and fire doors. This standard does not cover assemblies of which the leaves are moved vertically.

Powered pedestrian doors - Part 1: Product requirements and test methods

DIN 18650-2:2010 电动人行门.第2部分:电动人行门的安全性

This standard contains requirements regarding design, operation and safety at powered doors installed in pedestrian areas. Powered pedestrian doors might be used at entrances, in interior locations, in escape routes and emergency exits, and on smoke and fire doors. This standard does not cover assemblies of which the leaves are moved vertically.

Powered pedestrian doors - Part 2: Safety at powered pedestrian doors

BS EN 1906:2010 建筑五金器具.杠杆式把手和圆形把手家具.要求和试验方法

This European Standard specifies test methods and requirements for spindle and fastening elements, operating torques, permissible free play and safety, free angular movement and misalignment, durability, static strength and corrosion resistance for sprung and unsprung lever handles, knobs for doors, push pads and similar in combination with backplates or roses operating latches. This document is applicable only to lever handles and knobs that operate a latch or a lock and other devices. It specifies four categories of use according to frequency and other conditions of use.

Building hardware - Lever handles and knob furniture - Requirements and test methods

ANSI/BHMA A156.6-2010 建筑门细木工美国国家标准

This Standard contains requirements for door protection plates, door edgings, push plates, door pulls, push bars, and pull bars. Included are strength and finish tests, and dimensional and material criteria.

AMERICAN NATIONAL STANDARD FOR ARCHITECTURAL DOOR TRIM

ANSI/BHMA A156.9-2010 厨柜五金的美国国家标准

This Standard contains requirements for cabinet hardware and includes hinges, knobs, pulls, catches, shelf rests, standards and brackets, drawer slides, rotating shelves and track with guides for sliding panels. Included are performance tests covering operational, cyclical, strength, and finish criteria.

American National Standard for Cabinet Hardware

ANSI/BHMA A156.8-2010 门控制器美国国家标准.顶置门吸和固位装置

This Standard establishes requirements for overhead door stops and holders, and includes performance tests covering operational, cyclical, strength and finish criteria.

AMERICAN NATIONAL STANDARD FOR DOOR CONTROLS - OVERHEAD STOPS AND HOLDERS

ANSI/BHMA A156.11-2010 储藏柜锁具

This standard establishes requirements for Cabinet Locks used on doors, drawers and furniture. Cycle tests, operational tests, strength tests and finish tests are included.

Cabinet Locks

ANSI/BHMA A156.23-2010 电磁锁的美国国家标准

This Standard establishes requirements for electromagnetic locks and includes cyclical, dynamic, operational, strength and finish tests. This product is used for access control.

AMERICAN NATIONAL STANDARD FOR ELECTROMAGNETIC LOCKS

ANSI/BHMA A156.36-2010 辅助锁具的美国国家标准

ANSI/BHMA A156.36 establishes requirements for Auxiliary Locks, and includes dimensional criteria and five classifications of tests: operational, cycle, strength, security and, finish . This Standard was formerly part of ANSI/BHMA A156.5 for Auxiliary Locks and Associated Products

AMERICAN NATIONAL STANDARD FOR AUXILARY LOCKS

DIN SPEC 1104:2009 建筑五金.家庭和公共建筑内儿童,老人和残疾人使用的房门配件.说明符指南,德文版本CEN/TR 15894:2009

Building hardware - Door fittings for use by children, elderly and disabled people in domestic and public buildings - A guide for specifiers; German version CEN/TR 15894:2009

BS PD CEN/TR 15894:2009 建筑五金件.住宅和公共建筑内供儿童、老年人和残疾人使用的门配件.规范制定者指南

This European guidance document provides guidance on the selection of existing building hardware for manually and power operated pedestrian doors and associated products whose integration into the design of buildings will make them more safe, secure and convenient for the occupants inclusive of children, elderly and disabled people to use ("design for all"). Although it is intended for people with reduced physical and sensorial capabilities, it may not cover all specific individual needs. For example, it may not cover all needs of blind people or those not able to move unassisted.

Building hardware - Door fittings for use by children, elderly and disabled people in domestic and public buildings - A guide for specifiers

DS/CEN/TR 15894:2009 建筑五金 家庭和公共建筑中供儿童、老人和残疾人使用的门配件 规范指南

This European guidance document provides guidance on the selection of existing building hardware for manually and power operated pedestrian doors and associated products whose integration into the design of buildings will make them more safe, secure and convenient for the occupants inclusive of children, elderly and disabled people to use (""""design for all""""). Although it is intended for people with reduced physical and sensorial capabilities, it may not cover all specific individual needs. For example, it may not cover all needs of blind people or those not able to move unassisted.

Building hardware - Door fittings for use by children, elderly and disabled people in domestic and public buildings - A guide for specifiers