91.190 建筑附件 标准查询与下载

DS/EN 14846/ZA:2009 建筑五金 锁和插销 机电操作的锁和敲击板 要求和试验方法

This European Standard specifies requirements and test methods for strength, security, durability and function of electrical and electronic components for all types of electromechanically operated locks and striking plates used on doors, window doors and entrance doors in buildings.Requirements relating to the purely mechanical feature of products included in this European Standard (e.g. resistance to drilling/side load) are covered by EN 12209.This European Standard covers electromechanically operated locks and striking plates which are either manufactured and placed on the market in their entirety by one producer or assembled from sub-assemblies produced

Building hardware - Locks and latches - Electromechanically operated locks and striking plates - Requirements and test methods

DS/EN 1125/ZA:2009 建筑硬件 由单杠操作的紧急出口装置，用于逃生路线 要求和测试方法

This European Standard specifies requirements for the manufacture, performance and testing of panic exit devices mechanically operated by either a horizontal push-bar or a horizontal touch-bar, specifically designed for use in a panic situation on escape routes.The suitability of a panic exit device for use on fire/smoke resisting door assemblies is determined by fire performance tests conducted in addition to the performance tests required by this European Standard. Annex B indicates additional requirements for these products.This European Standard covers panic exit devices which are either manufactured and placed on the market in their entirety by one pro

Building hardware - Panic exit devices operated by a horizontal bar, for use on escape routes - Requirements and test methods

DS/EN 179/ZA:2009 建筑硬件 由杠杆手柄或推板操作的紧急出口装置，用于逃生路线 要求和测试方法

This European Standard specifies requirements for the manufacture, performance and testing of emergency exit devices mechanically operated by either a lever handle or a push pad for the purpose of achieving a safe exit under an emergency situation on escape routes.The suitability of an emergency exit device for use on smoke/fire-resisting door assemblies is determined by fire performance tests conducted in addition to the performance tests required by this European Standard. Annex B indicates additional requirements for these products.This European Standard covers emergency exit devices, which are either manufactured and placed on the market in their entire

Building hardware - Emergency exit devices operated by a lever handle or push pad, for use on escape routes - Requirements and test methods

BS EN 14846:2008 建筑五金件 锁和插销 电动锁和冲击板要求和试验方法

This European Standard specifies requirements and test methods for strength, security, durability and function of electrical and electronic components for all types of electromechanically operated locks and striking plates used on doors, window doors and entrance doors in buildings. Requirements relating to the purely mechanical feature of products included in this European Standard (e.g. resistance to drilling/side load) are covered by EN 12209. This European Standard covers electromechanically operated locks and striking plates which are either manufactured and placed on the market in their entirety by one producer or assembled from sub-assemblies produced by more than one producer and designed to be used in combination. This document is not applicable to electrically powered hold-open devices (EN 1155), electrically controlled panic exit systems (prEN 13633) or electrically controlled emergency exit systems (prEN 13637). It does not apply to purely magnetic locks, mechatronic or mechanical cylinders (EN 1303), handles (EN 1906), locks for windows, padlocks (EN 12320), locks for safes (EN 1300), furniture locks or prison locks, nor does it apply to cover operating and identification devices (such as mechanical cylinders, intelligent cards, digit codes, magnetic cards). This European Standard does not, for the time being, apply to electromagnetic door locks but these devices will be considered for inclusion in the first revision of this European Standard.

Building hardware - Locks and latches - Electromechanically operated locks and striking plates - Requirements and test methods

BS EN 13126-11:2008 建筑五金件 窗户和门上窗的要求及试验方法 上悬伸出翻转五金

This part of EN 13126 specifies the requirements and test methods for durability, strength, security and function of top hung projecting reversible hardware for windows. NOTE This European Standard is applicable to top hung projecting reversible hardware whether fitted with integral restrictors or not.

Building hardware - Requirements and test methods for windows and doors height windows - Top hung projecting reversible hardware

BS EN 13126-4:2008 建筑五金件 窗户和门上窗的要求及试验方法 长插销

This part of prEN 13126 specifies requirements and test methods for durability, strength, security and function of espagnolettes and their striker plates for use on windows and door height windows. NOTE Espagnolettes are defined as a locking mechanism for windows and door height windows that usually have a maximum handle movement of 90º. This European Standard does not include door bolts within the scope of EN 12051, or multi-point locks with latch and/or dead bolt within the scope of EN 12209.

Building hardware - Requirements and test methods for windows and doors height windows - Espagnolettes

BS EN 13126-6:2008 建筑五金件 窗户和门上窗的要求及试验方法(带或不带摩擦铰链)可变几何支柱铰链

This part of EN 13126 specifies requirements and test methods for durability, strength, security and function of mechanically operated variable geometry stay hinges (with or without a friction system). By means of this European Standard, the user of recognized tested hardware can assume that with correct usage, the variable geometry stay hinges (with or without a friction system) for windows conform to prescribed requirements. NOTE 1 This European Standard is applicable to variable geometry stay hinges (with or without a friction system) whether fitted with integral restrictors or not. NOTE 2 Balancing stay arms/hinges do not represent a friction system. NOTE 3 For the purposes of this European Standard, the friction system is achieved by friction pads or similar.

Building hardware - Requirements and test methods for windows and doors height windows - Variable geometry stay hinges (with or without a friction stay)

BS EN 13126-12:2008 建筑五金件 窗和门上窗用要求和试验方法 边悬伸出翻转五金件

This part of EN 13126 specifies the requirements and test methods for durability, strength, security and function of side hung projecting reversible hardware for windows. NOTE This European Standard is applicable to side hung projecting reversible hardware whether fitted with integral restrictors or not.

Building hardware - Requirements and test methods for windows and doors height windows - Side hung projecting reversible hardware

BS EN 13126-10:2008 建筑五金 窗户和门上窗的要求和试验方法 臂平衡设备

This part of EN 13126 specifies requirements and test methods for durability, strength, security and function of arm-balancing systems for windows and door height windows.

Building hardware - Requirements and test methods for windows and doors height windows - Arm-balancing systems

LST EN 13126-11-2009 建筑五金件 门窗高度窗的要求和试验方法 第11部分：上悬凸出可逆五金件

Building hardware - Requirements and test methods for windows and doors height windows - Part 11: Top hung projecting reversible hardware

LST EN 13126-10-2009 建筑五金件 门窗高度窗的要求和试验方法 第10部分：平衡臂系统

Building hardware - Requirements and test methods for windows and doors height windows - Part 10: Arm-balancing systems

LST EN 13126-12-2009 建筑五金件 门窗高度窗的要求和试验方法 第12部分：侧悬突出可逆五金件

Building hardware - Requirements and test methods for windows and doors height windows - Part 12: Side hung projecting reversible hardware

LST EN 13126-6-2009 建筑五金件 门窗高度窗的要求和试验方法 第6部分：可变几何撑条铰链（带或不带摩擦撑条）

Building hardware - Requirements and test methods for windows and doors height windows - Part 6: Variable geometry stay hinges (with or without a friction stay)

DIN EN 13126-12:2009 建筑五金件 窗和门上窗的要求和试验方法 第12部分:边悬伸出翻转五金件

This part of EN 13126 specifies the requirements and test methods for durability, strength, security and function of side hung projecting reversible hardware for windows. NOTE This European Standard is applicable to side hung projecting reversible hardware whether fitted with integral restrictors or not.

Building hardware - Requirements and test methods for windows and doors height windows - Part 12: Side hung projecting reversible hardware; German version EN 13126-12:2008

LST EN 13126-4-2009 建筑五金件 门窗高度窗的要求和试验方法 第4部分：Espagnolettes

Building hardware - Requirements and test methods for windows and doors height windows - Part 4: Espagnolettes

DIN EN 13126-6:2009 建筑五金件.窗户和门上窗的要求和试验方法.第6部分:可变几何支柱铰链(有或无摩擦离合器支柱)

This part of EN 13126 specifies requirements and test methods for durability, strength, security and function of mechanically operated variable geometry stay hinges (with or without a friction system). By means of this European Standard, the user of recognized tested hardware can assume that with correct usage, the variable geometry stay hinges (with or without a friction system) for windows conform to prescribed requirements. NOTE 1 This European Standard is applicable to variable geometry stay hinges (with or without a friction system) whether fitted with integral restrictors or not. NOTE 2 Balancing stay arms/hinges do not represent a friction system. NOTE 3 For the purposes of this European Standard, the friction system is achieved by friction pads or similar.

Building hardware - Requirements and test methods for windows and doors height windows - Part 6: Variable geometry stay hinges (with or without a friction stay); English version of DIN EN 13126-6:2009-02

DIN EN 13126-10:2009 建筑五金件.窗和门上窗用要求和试验方法.第10部分:臂平衡设备

This part of EN 13126 specifies requirements and test methods for durability, strength, security and function of arm-balancing systems for windows and door height windows.

Building hardware - Requirements and test methods for windows and doors height windows - Part 10: Arm-balancing systems; English version of DIN EN 13126-10:2009-02

DIN EN 13126-11:2009 建筑五金件.窗和门上窗的要求和试验方法.第11部分:上悬伸出翻转五金

This part of EN 13126 specifies the requirements and test methods for durability, strength, security and function of top hung projecting reversible hardware for windows. NOTE This European Standard is applicable to top hung projecting reversible hardware whether fitted with integral restrictors or not.

Building hardware - Requirements and test methods for windows and doors height windows - Part 11: Top hung projecting reversible hardware; English version of DIN EN 13126-11:2009-02

DS/EN 13126-10:2009 建筑五金件 门窗高度窗的要求和试验方法 第10部分：平衡臂系统

This part of EN 13126 specifies requirements and test methods for durability, strength, security and function of arm-balancing systems for windows and door height windows.

Building hardware - Requirements and test methods for windows and doors height windows - Part 10: Arm-balancing systems

DS/EN 13126-11:2009 建筑五金件 门窗高度窗的要求和试验方法 第11部分：上悬凸出可逆五金件

This part of EN 13126 specifies the requirements and test methods for durability, strength, security and function of top hung projecting reversible hardware for windows.NOTE This European Standard is applicable to top hung projecting reversible hardware whether fitted with integral restrictors or not.

Building hardware - Requirements and test methods for windows and doors height windows - Part 11: Top hung projecting reversible hardware