91.190 建筑附件 标准查询与下载

T/CECS 1066-2022 车库地坪技术规程

本规程共分7章和3个附录，主要技术内容包括：总则、术语、材料、设计、基面检查和处理、施工和验收等。

Garage Floor Technical Regulations

T/SBX 053-2022 橡塑降噪吸音板

本文件规定了橡塑降噪吸音板的术语和定义、要求、试验方法、检验规则及标志、包装、运输和贮存。 本文件适用于民用建筑和工业建筑的新建、扩建和既有建筑的改造中以及机车、机房等采用的降噪吸音保温系统。

Rubber and plastic noise-reducing sound-absorbing panels

BS EN 13126-4:2022 建筑硬件 窗户和门高窗户的五金件 要求和测试方法 西班牙人

What is BS EN 13126 ‑ 4 – Espagnolettes about? BS EN 13126 ‑ 4 is a European standard and a part of the BS EN 13126 series that discusses the requirements and test method of Espagnolette for building hardware. Building material signifies structural existence. It demonstrates the presence of aesthetic sense in a design, and hence, defines the practicability of the structure. BS EN 13126 ‑ 4 specifies requirements and test methods for durability, strength, security, and function of espagnolettes and their striker plates for use on windows and door height windows. Espagnolettes are defined as a locking mechanism for windows and door height windows that usually have a maximum handle movement of 90°. Note: BS EN 13126 ‑ 4 does not include door bolts within the scope of EN 12051 , locks with latch and/or deadbolt within the scope of EN 12209 or multi-point locks within the scope of prEN 15685 . Who is BS EN 13126 ‑ 4 – Espagnolettes for?

Building hardware. Hardware for windows and door height windows. Requirements and test methods. Espagnolettes

T/NAIC 004-2021 近零能耗建筑用产品评价 遮阳材料

本文件规定了近零能耗建筑用遮阳产品的术语和定义、一般要求、评价要求和评价方法。 本文件适用于建筑外遮阳、中置遮阳、内遮阳的近零能耗建筑用产品的评价。

Product evaluation of sunshade materials for near-zero energy buildings

ASTM F883-13(2022) 挂锁的标准性能规范

1.1 This specification covers environmental, functional, operational, and security requirements for padlocks. Included are function descriptions, cycle tests, operational tests, environmental tests, forcing tests, and surreptitious entry tests. No effort has been made to include criteria for specially made padlocks used by the Department of Defense or others in highly sensitive locations. 1.2 This specification describes and grades various levels of performance to provide users of the specification with criteria upon which to select suitable padlocks. 1.3 Tests described are laboratory tests and although they simulate field conditions as to attacks or the environment, they do not duplicate these conditions. Tests described are repeatable in the laboratory. 1.4 Some users of this specification may wish to use padlocks that have special attributes not related to security. These are found in 4.3. 1.5 The values stated in SI units are to be regarded as the standard. The inch-pound units given in parentheses are provided for information only. 1.6 The following precautionary caveat pertains only to the test method portions, Sections 8 – 11, of this specification: This standard does not purport to address the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Performance Specification for Padlocks

OENORM EN 13126-3-2021 建筑五金件 窗户和门窗用五金件 要求和测试方法 第3部分：把手，主要用于倾斜和转动、先倾斜和仅转动五金件

Building hardware - Hardware for windows and door-height windows - Requirements and test methods - Part 3: Handles, primarily for Tilt&Turn, Tilt-First and Turn-Only hardware

DIN EN 13126-2:2021 建筑五金 窗户和门高窗用五金 要求和试验方法 第2部分：窗户紧固件把手；德文版 EN 13126-2:2021

This document specifies requirements and test methods for durability, strength, security and functionality of window fastener handles. This document does not apply to the following hardware: a) handles - primarily for Tilt and Turn, Tilt-First and Turn-Only hardware, refer to EN

Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 2: Window fastener handles; German version EN 13126-2:2021

DIN EN 13126-7:2021 建筑五金 窗户和门高窗用五金 要求和试验方法 第7部分：指扣；德文版 EN 13126-7:2021

This document specifies the requirements and test procedures for durability, strength, security and functionality of finger catches for windows and door height windows.

Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 7: Finger catches; German version EN 13126-7:2021

OENORM EN 13126-2-2021 建筑五金件 窗户和门高窗用五金件 要求和试验方法 第2部分：窗户紧固件把手

Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 2: Window fastener handles

OENORM EN 13126-7-2021 建筑五金件 窗和门高窗用五金件 要求和试验方法 第7部分：指扣

Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 7: Finger catches

FprEN 13126-13-2021 建筑五金件 窗户和门高窗用五金件 要求和试验方法 第13部分：窗扇平衡

Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 13: Sash balances

FprEN 13126-14-2021 建筑五金 窗户和门高窗用五金 要求和试验方法 第14部分：窗扇紧固件

Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 14: Sash fasteners

FprEN 13126-4-2021 建筑五金件 窗户和门高窗用五金件 要求和测试方法 第4部分：Espagnolettes

Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 4: Espagnolettes

FprEN 13126-1-2021 建筑五金 窗户和门高窗用五金 要求和测试方法 第1部分：所有类型五金的通用要求

Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 1: Requirements common to all types of hardware

PN-EN 13126-7-2021-08 E 建筑五金 窗和门高窗用五金 要求和试验方法 第7部分：指扣

Building hardware -- Hardware for windows and door height windows -- Requirements and test methods -- Part 7: Finger catches

PN-EN 13126-2-2021-08 E 建筑五金 窗和门高窗用五金 要求和试验方法 第2部分：窗紧固件把手

Building hardware -- Hardware for windows and door height windows -- Requirements and test methods -- Part 2: Window fastener handles

prEN 13126-3-2021 建筑五金件 窗户和门窗用五金件 要求和测试方法 第3部分：把手，主要用于倾斜和转动、先倾斜和仅转动五金件

Building hardware - Hardware for windows and door-height windows - Requirements and test methods - Part 3: Handles, primarily for Tilt&Turn, Tilt-First and Turn-Only hardware

ASTM D7147-21 托梁吊架的试验和确定容许荷载的标准规范

1.1?This specification covers a procedure for evaluating metal devices used for wood-to-wood, wood-to-concrete, wood-to-concrete masonry, and wood-to-steel connections. This method is intended for use with devices used to connect joists, beams, and girders together. These device

Standard Specification for Testing and Establishing Allowable Loads of Joist Hangers

UNI EN 13126-2-2021 建筑五金件 窗户和门高窗用五金件 要求和试验方法 第2部分：窗户紧固件把手

Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 2: Window fastener handles

UNI EN 13126-7-2021 建筑五金件 窗和门高窗用五金件 要求和试验方法 第7部分：指扣

Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 7: Finger catches