91.220 施工设备 标准查询与下载

GB/T 6945-1986 筒式柴油打桩锤性能试验方法

本标准规定单作用筒式柴油打桩锤（以下简称样机）性能试验方法，不包括其他型式的柴油打桩锤性能试验方法。

Methods of performance test for tubular diesel pile hammer

T/QGCML 4237-2024 液压打桩机

本文件规定了液压打桩机的术语和定义、编号命名、基本参数、要求、试验方法、检验规则、标志、包装、运输和贮存。  本文件适用于液压打桩机（以下简称“打桩机”）。

Hydraulic pile driver

T/QGCML 4149-2024 液压振动锤

本文件规定了液压振动锤的分类、技术要求、试验方法、检验规则、标志、使用说明书、包装、运输和贮存。 本文件适用于液压振动锤的生产和检验。

Hydraulic vibrating hammer

T/QGCML 3894-2024 子母送料布料小车及布料系统

本文件规定了子母送料布料小车及布料系统的术语和定义、技术要求、试验方法、检验规则、标志、包装、运输与贮存。 本文件适用于混凝土预制构件生产线中使用的子母送料布料小车及布料系统。

Double-feeding fabric trolley and fabric system

T/QGCML 3361-2024 电器维修架

本文件规定了电器维修架的术语和定义、结构及原理、技术要求、试验方法、检验规则、标志、包装、运输及贮存。 本文件适用于电器维修架的生产及检验。

Electrical repair rack

T/CSBX 0022-2024 混凝土搅拌站搬迁再制造检测技术规范

本文件规定了混凝土搅拌站搬迁再制造的检测项目和要求及试验方法、产品分级和检验程序、判定规则。

Specification for the relocation and remanufacture of concrete batching plant

T/CSCMA 0017-2024 混凝土搅拌站搬迁再制造检测技术规范

本文件规定了混凝土搅拌站搬迁再制造的检测项目和要求及试验方法、产品分级和检验程序、判定规则。

Specification for the relocation and remanufacture of concrete batching plant

JB/T 14522-2023 建筑施工机械与设备 全断面隧道掘进机 刀盘

Building construction machinery and equipment full-section tunnel boring machine cutterhead

JB/T 14344-2023 道路施工与养护机械设备 沥青混合料搅拌设备 立式烘干筒

Road construction and maintenance machinery and equipment asphalt mixture mixing equipment vertical drying drum

JB/T 10837-2023 建筑施工机械与设备 三排柱式回转支承

Three-row column slewing bearing for construction machinery and equipment

JB/T 14345-2023 道路施工与养护机械设备 连续式稳定土振动搅拌机

Road construction and maintenance machinery and equipment Continuous soil stabilization vibrating mixer

JB/T 14346-2023 建筑施工机械与设备 泥水平衡顶管机

Building Construction Machinery and Equipment Slurry Balance Pipe Jacking Machine

JB/T 10704-2023 建筑施工机械与设备 混凝土布料机

Building construction machinery and equipment concrete placing machines

JB/T 10839-2023 建筑施工机械与设备 单排球式回转支承

Building construction machinery and equipment single volley ball slewing bearing

JB/T 14647-2023 建筑施工机械与设备 控制器技术规范

Technical Specifications for Controllers of Building Construction Machinery and Equipment

JB/T 10838-2023 建筑施工机械与设备 单排交叉滚柱（锥）式回转支承

Single-row crossed roller (cone) slewing bearing for construction machinery and equipment

DB11/T 611-2023 施工现场塔式起重机检验技术规程

Technical regulations for inspection of tower cranes at construction sites

DB11/T 636-2023 施工现场施工升降机检验技术规程

Technical regulations for inspection of construction lifts at construction sites

ASTM C1716/C1716M-23 混凝土砌块、相关砌块和棱镜的压缩试验机要求标准规范

Standard Specification for Compression Testing Machine Requirements for Concrete Masonry Units, Related Units, and Prisms

CSA Z797-2023 通道脚手架实施规范

1 Scope 1.1 Purpose The purpose of this Standard is to provide criteria for the safe erection, use, and inspection of access scaffold (as covered in CSA S269.2 and engineered systems) and for the training of erectors and users of such equipment. 1.2 Subjects addressed This Standard applies to the erection, use, and inspection of access scaffold, and to training requirements for access scaffold that is a) supported on a surface; b) hung from multiple points, but is not capable of moving vertically or horizontally; or c) mounted on wheels. This Standard addresses key hazards, including fall hazards, structural instability, platform failures, and material handling issues. Note: In this Standard, the term “erection” refers to the assembling, altering, or dismantling of a scaffold. While this Standard applies to scaffold as defined in Clause 3, this Standard is not limited to scaffold used solely for the purpose of construction, maintenance, or repair operations. 1.3 Equipment not covered This Standard does not apply to the following: a) falsework and formwork for construction purposes, as covered in CSA S269.1; b) suspended access equipment, as covered in CSA Z91 and CSA Z271; c) elevating work platforms, as covered in CAN/CSA-B354.6, CAN/CSA-B354.7, and CAN/CSA-B354.8; d) manual or powered mast-climbing work platforms, such as a pump jack scaffold or equipment covered in CSA B354.9, CSA B354.10, and CSA B354.11; e) centre-pole scaffolds; and f) appliances or accessories attached to scaffold. 1.4 Terminology In this Standard, “shall” is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the Standard; “should” is used to express a recommendation or that which is advised but not required; and “may” is used to express an option or that which is permissible within the limits of the Standard. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. December 2023 © 2023 Canadian Standards Association 13 Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application. 1.5 Measurement The values given in SI units are the units of record for the purposes of this Standard. The values given in parentheses are for information and comparison only.

Code of practice for access scaffold