93.010 土木工程综合 标准查询与下载

NF P03-002:1992 专门合同.典型规范.土木工程建筑专门合同签约程序

Private contracts. Typical specifications. Contract procedure for civil engineering works, private contracts.

CNS 12839-1991 电力电缆地下埋设施工法

本标准适用于使用电压 7000V 以下之电力电缆（Power Cables），设置于需要场所对地下埋设施工法。1.1 由管路引入式设置之电线线路。1.2 由直接埋设式设置之电线线路。1.3 屋外配线。

Installation Methods of Power Cables Buried in Ground

SANS 10120-2 AH:1986 与土木工程施工和合同文件用标准化规范同时使用的操作守则．第2部分：项目规范．第AH节：概述（结构）

To meet requirements imposed by various norms of economic development, projects are classified as normal, prestige, subeconomic and labour-based projects.

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section AH: General (structural)

SANS 10120-2 AB:1986 与土木工程施工和合同文件用标准化规范同时使用的操作守则．第2部分：项目规范．第AB节：工程师的办公室

To meet requirements imposed by various norms of economic development, projects are classified as normal, prestige, subeconomic and labour-based projects.

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section AB: Engineer's office

SANS 10120-2 A:1986 与土木工程施工和合同文件用标准化规范同时使用的操作守则．第2部分：项目规范．第A节：概述

Covers details of essential, optional and additional clauses that are required in respect of each applicable standardized specification.

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section A: General

SANS 10120-4 A:1986 与土木工程施工和合同文件用标准化规范同时使用的操作守则．第4部分：标准工程数量表．第A节：概述

Covers general guidance on the taking-off of quantities and the preparation of a schedule of quantities.

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section A: General

SANS 10120-5 AB:1986 与土木工程施工和合同文件用标准化规范同时使用的操作守则．第5部分：合同管理．第AB节：工程师办公室

Explains the format and content of standardized civil engineering and also gives guidance on the drafting of project specifications and other contract documents.

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section AB: Engineer's office

SANS 10120-3 A:1986 与土木工程施工和合同文件用标准化规范同时使用的操作守则．第3部分：设计指南．第A节：概述

For use in connection with works of civil engineering construction, prepared under the auspices of the SAICE, SAACE and SAFCEC and recommended by these bodies for general use, and also endorsed by the Divil Engineering Advisory Council for general use.

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section A: General

SANS 1200 AH:1986 土木工程施工路段标准规范．第AH节：概述（结构）

This specification covers the principles, general responsibilities and requirements applicable to the construction or fabrication and erection of a structure or group of structures in concrete (cast-in-situ, precast or prestressed), steel, aluminium or structural timber. NOTE a) Terminology used throughout the standardized specifications is explained because, in terms of the conditions of contract, the Employer, the Contractor and the Engineer have certain rights and obligations that can be exercised most equitably when all parties have a clear understanding of the operations that are covered by each item in the schedule of quantities. As this specification is applicable only to construction, on a prepared site or foundations, of a structure or group of structures that fall within a single work classification (see Annexure A to Part 1 of SABS 0120), only one item is scheduled to cover the cost of the Contractor's obligations of a preliminary and general nature. b) The standards referred to in the specification are listed in Appendix A.

Standardized specification for civil engineering construction Section AH: General (structural)

SANS 1200 AB:1986 土木工程施工路段标准规范．第AB节：工程师办公室

This specification covers the requirements for offices and the minimum associated facilities for the use of the Engineer on a Site. It covers a scheduled number of identical offices and allows for mobile and semi-mobile accommodation. NOTE: The standards referred to in the specification are listed in Appendix A.

Standardized specification for civil engineering construction Section AB: Engineer's office

SANS 1200 A:1986 土木工程施工路段标准规范．第A节：概述

This specification covers the principles, responsibilities and requirements generally applicable to all civil engineering construction and building works. NOTE a) Terminology used throughout the standardized specifications is explained because, in terms of the conditions of contract, the Employer, the Contractor and the Engineer have certain rights and obligations that can be exercised most equitably when all parties have a clear understanding of the operations that are covered by each item in the schedule of quantities. As this specification is applicable only to construction, on a prepared site or foundations, of a structure or group of structures that fall within a single work classification (see Annexure A to Part 1 of SABS 0120), only one item is scheduled to cover the cost of the Contractor's obligations of a preliminary and general nature. b) The standards referred to in the specification are listed in Appendix A.

Standardized specification for civil engineering construction Section A: General

SANS 10120-3 AB:1986 与土木工程施工和合同文件用标准化规范同时使用的操作守则．第3部分：设计指南．第AB节：工程师办公室

Guidance for design - engineer's office

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section AB: Engineer's office

SANS 10120-5 A:1986 与土木工程施工和合同文件用标准化规范同时使用的操作守则．第5部分：合同管理．第A节：概述

Explains the format and content of standardized civil engineering specifications and also gives guidance on the drafting of project specifications and other contract documents.

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section A: General

SANS 10120-4 AH:1983 与土木工程施工和合同文件用标准化规范同时使用的操作守则．第4部分：标准工程数量表．第AH节：概述（结构）

Covers schedules of quantities for structures.

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section AH: General (structural)

SANS 10120-3 AH:1983 与土木工程施工和合同文件用标准化规范同时使用的操作守则．第3部分：设计指南．第AH节：概述（结构）

Guidance for design - general (structural)

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section AH: General (structural)

SANS 10120-5 AH:1983 与土木工程施工和合同文件用标准化规范同时使用的操作守则．第5部分：合同管理．第AH节：概述（结构）

General (structural)

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section AH: General (structural)

SANS 10120-4 AB:1982 与土木工程施工和合同文件用标准化规范同时使用的操作守则．第4部分：标准工程数量表．第AB节：工程师办公室

Covers the taking-off of quantities and the preparation of a schedule of quantities for an engineer's office.

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section AB: Engineer's office

CNS 6769-1980 电缆直接埋入混凝土中施工法

本标准适用于 600V 以下屋内配，将剖面积 14mm2 以下电缆直接埋入（以下简称直埋）混凝土中施工法。

Installation Method of Cables Embedded Direct in Concrete

GOST 16149-1970 地下构筑物防杂散电流腐蚀的极化保护装置.技术要求

Настоящий стандарт распространяется на все виды стальных подземных сооружений и устанавливает технические требования к защите от корроз

Protection of underground structures against stray current corrosion by polarized protectors. Technical requirements