93.030 外部污水排放系统 标准查询与下载

DIN EN 295-2:2013 排水排污用陶土管道系统.第2部分:合格和取样评价.德文版本EN 295-2-2013

Vitrified clay pipe systems for drains and sewers - Part 2: Evaluation of conformity and sampling; German version EN 295-2:2013

LST EN 15383-2013 排水和污水处理用塑料管道系统 基于聚酯树脂（UP）的玻璃纤维增强热固性塑料（GRP） 检修孔和检查室

Plastics piping systems for drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) based on polyester resin (UP) - Manholes and inspection chambers

JIS A 7501:2013 污水管道系统维护计划

Planning for sewer system maintenance

NF P16-321-6*NF EN 295-6:2013 排水管和下水道用陶土管道系统.第6部分:人孔和检查井组件的要求

Vitrified clay pipes systems for drain and sewers - Part 6: requirements for components of manholes and inspection chambers

NF P16-158-2:2013 建筑物外部排水沟和下水道清洁工作的管理和控制 - 第2部分: 复原

Management and control of cleaning operations in drains and sewers outside buildings - Part 2: rehabilitation

NF T57-214:2013 压力和无压力排水和排污塑料管道系统 - 基于不饱和聚酯树脂 (UP) 的玻璃增强热固性塑料 (GRP) - 管道, 管件以及接头规范

Plastics piping systems for drainage and sewerage with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Specifications for pipes, fittings and joints

PD CEN/TS 13476-4:2013 非压力地下排水和污水处理用塑料管道系统 未增塑聚氯乙烯（PVC-U）、聚丙烯（PP）和聚乙烯（PE）的结构壁管道系统 第4部分：合格评定指南

This Technical Specification gives guidance for the assessment of conformity of compounds / formulations, products and assemblies in accordance with the applicable part(s) of EN 13476-1, EN 13476-2 and EN 13476-3 intended to be included in the manufacturer's quality plan as part of the quality management system and for the establishment of third-party certification procedures. It is recommended that the quality management system conforms to or is no less stringent than the relevant requirements to EN ISO 9001:2008. If third-party certification is involved, it is recommended that the certification body is accredited to EN 45011, EN 45012 or EN ISO/IEC 17021, as applicable. In conjunction with EN 13476-1, EN 13476-2 and EN 13476-3 (see Foreword) this document is applicable to Plastics piping systems for non-pressure underground drainage and sewerage - Structural-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE): for non-pressure underground drainage and sewerage outside the building structure (application area code "U") reflected in de-marking of products by "U", and for non-pressure underground drainage and sewerage for both buried in ground within the building structure (application area code "D" and outside the building structure (application area code "U") reflected in de marking of products by "UD".)

Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 4: Guidance for the assessment of conformity

BS EN 14654-2:2013 排水沟和下水道清洁工作的管理和控制.下水道清洁

Management and control of operational activities in drain and sewer systems outside buildings. Rehabilitation

BS EN 14364:2013 地下压力排水和排污水塑料管道系统.不饱和聚酯树脂(UP)基玻璃纤维增强的热固性塑料(GRP).管道、配件和连接件规格

Plastics piping systems for drainage and sewerage with or without pressure. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Specifications for pipes, fittings and joints

DS/EN 13508-1:2013 建筑物外排水和下水道系统的调查和评估 第1部分：一般要求

This European Standard is applicable to the investigation and assessment of drain and sewer systems outside buildings. It is applicable to drain and sewer systems, which operate essentially under gravity, from the point where the sewage leaves a building

Investigation and assessment of drain and sewer systems outside buildings - Part 1: General Requirements

DS/EN 14654-2:2013 建筑物外排水和下水道系统运行活动的管理和控制 第2部分：修复

This European Standard establishes the general principles for the management and control of operational activities in drain and sewer systems outside buildings and specifies requirements for development and implementation of work programmes, and the selec

Management and control of operational activities in drain and sewer systems outside buildings - Part 2: Rehabilitation

DIN EN 14654-2:2013 排水沟和下水道清洁工作的管理和控制.第2部分:修复.德文版本 EN 14654-2-2013

This European Standard establishes the general principles for the management and control of operational activities in drain and sewer systems outside buildings and specifies requirements for development and implementation of work programmes, and the selection of techniques. This part covers the management and control of rehabilitation activities.

Management and control of operational activities in drain and sewer systems outside buildings - Part 2: Rehabilitation; German version EN 14654-2:2013

DIN EN 15383:2013 排水管和下水道用塑料管道系统.基于聚酯树脂(UP)的玻璃增强热固性塑料(GRP).检修孔和检查室.德文版本EN 15383-2012

This European Standard applies to a) manholes, when made from glass-reinforced thermosetting plastics (GRP) based on polyester resin (UP); b) inspection chambers, when made from glass-reinforced thermosetting plastics (GRP) based on polyester resin (UP) which are intended to be used with inverts which are at a depth not exceeding 2 m.

Plastics piping systems for drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) based on polyester resin (UP) - Manholes and inspection chambers; German version EN 15383:2012

BS EN 295-2:2013 排水管和下水道用陶土管道系统. 一致性评价和采样

Vitrified clay pipe systems for drains and sewers. Evaluation of conformity and sampling

BS EN 295-4:2013 排水管和下水道用陶土管道系统. 接头, 连接器和挠性联轴器要求

Vitrified clay pipe systems for drains and sewers. Requirements for adaptors, connectors and flexible couplings

BS EN 295-1:2013 排水排污用陶土管道系统.管道、配件和接头要求

Vitrified clay pipe systems for drains and sewers. Requirements for pipes, fittings and joints

BS EN 295-6:2013 排水管和下水道用陶土管道系统. 检修孔和检查井的要求

Vitrified clay pipes systems for drain and sewers. Requirements for components of manholes and inspection chambers

BS EN 295-5:2013 排水管和下水道用陶土管道系统. 带孔的套管及管件的要求

Vitrified clay pipe systems for drains and sewers. Requirements for perforated pipes and fittings

BS EN 295-7:2013 雨水管和污水管用陶土管道系统.顶管用陶土管和接头的要求

Vitrified clay pipe systems for drains and sewers. Requirements for pipes and joints for pipe jacking

EN 295-4:2013 陶土管系统的下水道和河流-第4部分:要求适配器,连接器和灵活的联轴器(取代:CEN 295 -10)

This European Standard specifies requirements for adaptors and connectors made from vitrified clay and/or other suitable materials for use with vitrified clay pipes and fittings for buried drain and sewer systems for the conveyance of wastewater (including domestic wastewater, surface water and rainwater) under gravity and periodic hydraulic surcharge or under continuous low head of pressure.Adaptors and connectors include insertable fittings, sealing rings for cut pipes and heat-shrinkable sleeves.This standard also applies for metal banded flexible couplings and adaptors and specifies requirements for rubber, polyurethane, stainless steel and other compon

Vitrified clay pipe systems for drains and sewers - Part 4: Requirements for adaptors@ connectors and flexible couplings