93.030 外部污水排放系统 标准查询与下载

NF P16-366-1*NF EN 14758-1:2012 无压力地下排水和排污用塑料管道系统.含矿物改良剂的聚丙烯(PP-MD).第1部分:管,管件和系统用规范

Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene with mineral modifiers (PP-MD) - Part 1 : specifications for pipes, fittings and the system.

DIN EN 14758-1:2012 地下无压力排水和排污用塑料管道系统.有矿物调节剂的聚丙烯(PP-MD)管道系统.第1部分:管,管件和系统规范

Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene with mineral modifiers (PP-MD) - Part 1: Specifications for pipes, fittings and the system; German version EN 14758-1:2012

BS EN 14758-1:2012 无压力地下排水和污水用塑料管道系统.含矿物调节剂的聚丙烯(PP-MD).管、配件和系统用规范

Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene with mineral modifiers (PP-MD). Specifications for pipes, fittings and the system

LST EN 295-3-2012 排水管和下水道用陶瓷粘土管道系统 第3部分：试验方法

Vitrified clay pipe systems for drains and sewers - Part 3: Test methods

PD CEN/TS 13598-3:2012 塑料管道系统地下无压排水系统和污水.Unplasticized保利(氯乙烯)(硬聚氯乙烯),聚丙烯(PP),聚乙烯(PE)-第3部分:指导评估合格

This Technical Specification gives guidance for the assessment of conformity of compounds/formulations, products and assemblies in accordance with Parts 1 and 2 of EN 13598 intended to be included in the manufacturer's quality plan as part of the quality management system and for the establishment of third-party certification procedures. NOTE In order to help the reader, a basic test matrix is given in Annexes A and B. In conjunction with EN 13598-1 and-2, this Technical Specification is applicable to ancillary underground drainage fittings including manholes and inspection chambers: for non-pressure underground drainage and sewerage outside the building structure (application area code "U"), reflected in the marking of products by "U", and for non-pressure underground drainage and sewerage for both buried in ground within the building structure (application area code "D") and outside the building structure (application area code "U"), reflected in the marking of products by "UD".

Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride)(PVC-U), polypropylene (PP) and polyethylene (PE) - Part 3: Guidance for assessment of conformity

DIN EN 295-3:2012 雨水和污水排放陶土管系统.第3部分:试验方法

Vitrified clay pipe systems for drains and sewers - Part 3: Test methods; German version EN 295-3:2012

BS EN 295-3:2012 用于污水排放的陶土管系统.试验方法

Vitrified clay pipe systems for drains and sewers. Test methods

EN 295-3:2012 雨水和污水排放陶土管系统.第3部分:试验方法

This European Standard specifies requirements for testing of products manufactured from vitrified clay and other materials specified in the following standards: pipes, fittings and joints according to EN 295-1; adaptors, connectors and flexible couplings according to EN 295-4; perforated pipes and fittings according to EN 295-5; components of manholes and inspection chambers according to EN 295-6; pipes and joints for pipe jacking according to EN 295-7.

Vitrified clay pipe systems for drains and sewers - Part 3: Test methods

EN 13508-1:2012 调查和评估建筑物外的排水沟和下水道系统-第1部分:一般要求

This European Standard is applicable to the investigation and assessment of drain and sewer systems outside

Investigation and assessment of drain and sewer systems outside buildings - Part 1: General Requirements

ANSI/ASTM F2947:2012 卫生下水道应用件150 至 1500 mm [6 至 60 in]环形波纹轮廓-管壁聚乙烯(PE)管和配件规格

Specification for 150 to 1500 mm [6 to 60 in] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications

ANSI/ASTM F1499:2012 共挤复合排水,排污,排气管(DWV)规格

Specification for Coextruded Composite Drain, Waste, and Vent Pipe (DWV)

EN 15383:2012 玻璃塑料排水管道系统和污水.增强热固性塑料(GRP)基于聚酯树脂()-钱伯斯人孔,检查

This European Standard applies to a) manholes, when made from glass-reinforced thermosetting plastics (GRP) based on polyester resin (UP);b) inspection chambers, when made from glass-reinforced thermosetting plastics (GRP) based on polyester resin (UP) which are intended to be used with inverts which are at a depth not exceeding 2 m.These products are intended to be used within a drain or sewer system operating without pressure or occasionally at a head of pressure up to 1 bar.It applies to products, and their joints, intended for use in buried installations and to be installed by open-trench techniques.The units have a circular shape with nominal sizes not

Plastics piping systems for drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) based on polyester resin (UP) - Manholes and inspection chambers (Incorporates Amendment A1: 2013)

CJ/T 380-2011 污水提升装置技术条件

本标准规定了污水提升装置的组成与使用条件、要求、产品检验、检验规则、标志、包装、运输和贮存等。 本标准适用于各类建筑物地下室污水提升所使用的装置。

Technical conditions of sewage-elevating device

CJ/T 379-2011 多功能斜板阀

本标准规定了多功能斜板阀的结构型式及型号编制、材料、要求、试验方法、检验规则、标志、包装和 贮运等。 本标准适用于公称压力为PN10、PN16,公称尺寸为DN200～DN2000，工作温度不高于80 °C ，介质为清水、污水及油品管道上的多功能斜板阀。

Multi-functional tilting disc valve

DS/EN 12666-1+A1:2011 非压力地下排水和污水处理用塑料管道系统 聚乙烯（PE） 第1部分：管道、配件和系统规范

This Part of EN 12666 specifies the requirements for pipes, fittings and the system of polyethylene (PE) piping systems intended to be used for- non pressure underground drainage and sewerage outside the building structure (application area code """"U""""), and- non pressure underground drainage and sewerage for both buried in the ground within the building structure (application area code """"D"""") and outside the building structure.This is reflected in the marking of products by """"U"""" and """"UD"""".It also specifies the test parameters for the test methods referred to in this European Standard.This European Standard covers a range of nominal sizes,

Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Part 1: Specifications for pipes, fittings and the system

GSO EN 588-2:2011 排水和污水处理用纤维增强水泥管 第2部分：沙井和沙井

This Standard gives specifications for asbestos free fibre-cement manholes and inspection chambers for use in buried drains and sewers with gravity flow at atmospheric pressure. Products covered by this standard include prefabricated elements in as well as prefabricated complete manholes and inspection chambers. It specifies definitions, descriptions, composition, general appearance and finish, geometrical characteristics, mechanical characteristics, acceptance tests, type tests and quality control requirements. NOTE Complete manholes or prefabricated elements may also be used for other purposes such as pumping stations, items of drainage, items for sewage treatment or sewage disposal, when corresponding additional requirements according to the relevant European Standards are fulfilled.

Fibre cement pipes for drains and sewers - Part 2: Manholes and inspection chambers

GSO EN 1917:2011 无钢筋混凝土、钢和纤维增强的沙井和沙井

This European Standard specifies performance requirements as defined in table 1 and describes test methods for precast concrete units, including joints (elastomeric, plastomeric or other sealing materials, either integrated in the unit or supplied separately), for inspection chambers designed to be used for inverts not exceeding 2 metres deep and manholes, of circular, rectangular (with or without chamfered or rounded corners) or elliptical internal shape, unreinforced, steel fibre and reinforced, with nominal sizes not exceeding DN 1250 for units with a circular bore or LN 1250 for units with a rectangular or elliptical shape.

Concrete manholes and inspection chambers, unreinforced, steel fibre and reinforced

LST EN 13508-2-2003+A1-2011 建筑物外排水和下水道系统的调查和评估 第2部分：目视检查编码系统

Investigation and assessment of drain and sewer systems outside buildings - Part 2: Visual inspection coding system

DS/EN 1610:2011 排水沟和下水道的建造和测试

This European Standard is applicable to the construction and testing of drains and sewers normally buried in the ground and normally operating under gravity. The construction of pipelines operating under pressure is covered by this European Standard together with prEN 805 as appropriate. This European Standard is applicable to drains and sewers lait in trenches, under embankments or above ground.

Construction and testing of drains and sewers

NF P16-155-2/IN1*NF EN 13508-2/IN1:2011 建筑物外排水及污水管道系统的调查与评估.第2部分:目检编码系统.

Investigation and assessment of drain and sewer systems outside buildings - Part 2 : visual inspection coding system.