93.030 外部污水排放系统 标准查询与下载

NF P16-200:1997 建筑物外部真空排污系统

VACUUM SEWERAGE SYSTEMS OUTSIDE BUILDINGS. (EUROPEAN STANDARD EN 1091).

BS EN 752-2:1997 室外建筑物的排水和污水系统.性能要求

This European Standard is applicable to drain and sewer systems, which operate essentially under gravity, from the point where the sewage leaves a building or roof drainage system, or enters a road gully, to the point where it is discharged into a treatment works or receiving water. Drains and sewers below buildings are included provided that they do not form part of the drainage system of the building. This Part sets out the performance requirements to be taken into account when planning, designing, installing and operating drain and sewer systems that operate essentially under gravity.

Drain and sewer systems outside buildings - Performance requirements

BS EN 752-3:1997 室外建筑物的排水和污水系统.计划

This European Standard is applicable to drain and sewer systems, which operate essentially under gravity, from the point where the sewage leaves a building or roof drainage system, or enters a road gully, to the point where it is discharged into a treatment works or receiving water. Drains and sewers below buildings are included provided that they do not form part of the drainage system of the building. This Part sets out the principles to follow when planning drain and sewer systems that operate essentially under gravity.

Drain and sewer systems outside buildings - Planning

DIN EN 1091:1997 建筑物外真空排污系统

The document specifies the performance requirements of negative pressure driven sewerage systems carrying domestic waste water independent of their material. It also covers additional performance characteristics that are of importance to the specifiers, designers, constructors and operators of vacuum sewerage systems.

Vacuum sewerage systems outside buildings; German version EN 1091:1996

NF P16-321-1:1996 排水排污陶管、配件和管接头.第1部分:要求(欧洲标准EN 295-1)

Vitrified clay pipes and fittings and pipe joints for drains and sewers. Part 1 : requirements.

NF P16-150-2:1996 建筑物外部的排污系统.第2部分:性能要求

Drain and sewer systems outside buildings. Part 2 : performance requirements.

NF P16-150-3:1996 建筑物外部的排水和排污系统.第3部分:规划

Drain and sewer systems outside buildings. Part 3 : planning.

BS EN 752-1:1996 室外建筑物的排水和污水系统.概述和定义

This European Standard applies to drain and sewer systems, which operate essentially under gravity, from the point where the sewerage leaves a building or roof drainage system, or enters a road gully, to the point where it is discharged into a treatment works or receiving water. Drains and sewers below buildings are included provided that they do not form part of the drainage system of the building. This Part covers general matters and sets out definitions of terms that relate to the functional requirements of drain and sewer systems outside buildings. These definitions are not intended to be legal definitions.

Drain and sewer systems outside buildings - Generalities and definitions

BS EN 295-6:1996 排水管和污水管用陶制管、管件及管接头.陶制管人孔的要求

This Standard specifies the requirements for components for vitrified clay manholes and inspection shafts. These are for use with flexibly jointed vitrified clay pipes and fittings manufactured to EN 295-1 and where appropriate the components are specified to EN 295-1. Where this standard provides for different systems of jointing, different heights, different strength classes and different channels, the specifiers/purchasers may select according to their requirements. NOTE Where reference is made to clauses in EN 295-1:1991, EN 295-2:1991 or EN 295-3:1991 this is clearly stated.

Vitrified clay pipes and fittings and pipe joints for drains and sewers - Requirements for vitrified clay manholes

BS EN 295-7:1996 排水管和污水管用陶制管、管件及管接头.陶制管和管插接接头的要求

This Part of this European Standard specifies requirements for flexibly jointed vitrified clay pipes for the construction of pipelines by pipe jacking techniques including micro-tunnelling, pipe-eating, pipe bursting and where appropriate for slip-lining. Where this standard provides for different strength classes the specifiers/purchasers may select according to their requirements.

Vitrified clay pipes and fittings and pipe joints for drains and sewers - Requirements for vitrified clay pipes and joints for pipe jacking

NF P16-150-1:1996 建筑物外部的排水排污系统.第1部分:总则

Drain and sewer systems outside buildings. Part 1 : generalities and definitions.

NF P16-321-7:1996 排水及污水陶土管道.配件和管接头.第7部分:陶土管道和管道插孔用连接件要求

Vitrified clays pipes and fittings and pipe joints for drains and sewers. Part 7 : requirements for vitrified clay pipes and joints for pipe jacking.

NF P16-321-6:1996 排水及污水陶土管道.配件和管接头.第6部分:陶土管道出入水孔要求

Vitrified clay pipes and fittings and pipe joints for drains and sewers. Part 6 : requirements for vitrified clay manholes.

EN 1091:1996 建筑物外真空排水系统

This European Standard specifies the performance requirements of negative pressure driven sewerage systems carrying domestic waste water independent of their material. It also covers additional performance characteristics that are of importance toThe specifiers, designers, constructors and operators of vacuum sewerage systems.

Vacuum Sewerage Systems Outside Buildings

DIN 4034-10:1995 预制混凝土和钢筋混凝土井筒和检验室.第10部分:地下敷设排水管道用砖砌井筒底部.要求和检验

The document lays down brick bases for manholes and inspection chambers for buried drains and sewers. Manhole bases for this document will be in priority employment, if suitable individual manufactury of prefabricated parts for DIN 4034-1 makes necessary disproportionate high expense.#,,#

Prefabricated concrete and reinforced concrete manholes and inspection chambers - Part 10: Brick manhole bases for buried drains and sewers; requirements and testing

BS EN 295-4:1995 排水管和下水道用陶制管和管配件及管接头.专用配件、管接头和配套附件的要求

This Standard specifies the requirements for special fittings, adaptors and compatible accessories made from vitrified clay and/or other suitable materials for use with vitrified clay pipes and fittings in drainage and sewerage systems. It does not apply to items which are specified in other Parts of EN 295. Any additional requirements for particular items are given in the annexes to this Part of the standard. Where this Standard provides for different systems of jointing dimensions, different lengths and different types of fittings, the specifiers/purchasers may select according to their requirements. NOTE 1. The wide diversity of ranges and numbers of special fittings, adaptors and compatible accessories offered by manufacturers and required by specifiers and purchasers throughout Europe cannot be fully listed within this standard. Manufacturers' product range lists and specifications provide the necessary information. NOTE 2. Where reference is made to clauses in EN 295-1 : 1991 , EN 295-2 : 1991 or EN 295-3 : 1991 this is clearly stated.

Vitrified clay pipes and fittings and pipe joints for drains and sewers - Requirements for special fittings, adaptors and compatible accessories

ISO/DIS 13265 无压地下排水和污水处理用热塑性塑料管道系统《埋地无压应用接头》通过估算密封压力对弹性密封件接头长期密封性能的试验方法

Thermoplastics piping systems for non-pressure underground drainage and sewerage — Joints for buried non-pressure applications — Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure

NF P16-321-4:1995 排水和排污陶土管和配件及管接头.第4部分:专用配件、转换接头和可互换附件的要求(EN 295-4)

Vitrified clay pipes and fittings and pipe joints for drains and sewers. Part 4 : requirements for special fittings, adaptors and compatible accessories.

BS EN 295-5:1994 排水管和下水道用陶管和管配件及管接头.带孔的陶管及配件的要求

Perforated pipes and compatible fittings for the construction of french drains, land drains and drainage of waste tips.

Vitrified clay pipes and fittings and pipe joints for drains and sewers - Requirements for perforated vitrified clay pipes and fittings

NF P16-321-5:1994 排水及污水用陶土管道、配件和管接头.第5部分:多孔陶土管道和配件的要求(EN 295-5)

Vitrified clay pipes and fittings and pipe joints for drains and sewers. Part 5 : requirements for perforated vitrified clay pipes and fittings.