93.060 隧道建筑 标准查询与下载

DB62/T 4131-2020 黄土公路隧道设计施工技术规范

Technical specification for design and construction of loess highway tunnels

T/CMEA 6-2020 节段预制装配综合管廊施工及验收标准

1 总则；2 术语； 3 基本规定；4 节段构件的预制、存放、运输；5 节段的装配；6 防水工程施工；7 质量检验与工程验收。

Standard for construction and acceptance of segmental precast assembly utility tunnel

ASTM F3079-14(2020) 隧道和公用设施施工期间地面移动对现有地下公用设施影响的分布式光纤传感系统的使用标准实施规程

1.1 This practice specifically addresses the means and methods for the use of distributed optical fiber sensors for monitoring ground movements during tunnel and utility construction and its impact on existing utilities. 1.2 This practice applies to the process of selecting suitable materials, design, installation, data collection, data processing and reporting of results. 1.3 This practice applies to all utilities that transport water, sewage, oil, gas, chemicals, electric power, communications and mass media content. 1.4 This practice applies to all tunnels that transport and/or store water or sewage. 1.5 This practice also applies to tunnels that carry the utilities in (1.3), water for hydropower, traffic, rail, freight, capsule transport, and those used for storage. 1.6 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Use of Distributed Optical Fiber Sensing Systems for Monitoring the Impact of Ground Movements During Tunnel and Utility Construction on Existing Underground Utilities

DB37/T 5152-2019 城市超小净距浅埋暗挖隧道施工技术标准

本标准适用于山东省城市小超净距浅埋暗挖隧道工程的施工。

Construction technical standard for urban ultra-small clear distance shallow-buried tunnels

DB50/T 962-2019 公路瓦斯隧道施工技术规范

Technical specification for construction of highway gas tunnel

T/CSPSTC 42-2019 盾构隧道施工测量技术规范

标准主要技术内容及相关依据 1、标准主要内容 本标准主要规定了控制测量、盾构初始化测量、盾构自动导向系统、盾构施工安全监测、盾构施工竣工测量和盾构隧道测量精度分析等相关内容。 2、相关依据 本团体标准的编制依据主要是四部国标，分别是国标《城市轨道交通工程测量规范》(GB/T50308-2017)、国标《工程测量规范》GB50026-2007、国标《国家一、二等水准测量规范》GB/T12897和国标《工程测量规范》GB 50026。

Technical specification for construction survey of shield tunnel

T/CSPSTC 40-2019 软岩隧道监控量测技术规范

本标准主要规定了不同工况和围岩级别下的围岩监控量测断面测点布设及断面间距、监控量测技术和具体方法、围岩变形量预警标准、围岩运移规律的评判。 大部分软岩隧道围岩监控量测在操作过程中沿用普通隧道的监控方法，基于软岩的物理力学特性和复杂的地质构造应力，围岩变形速率和极限位移量等围岩和支护结构的稳定性判别指标均与常规隧道不同；科技的进步推动了业内监控设备的升级，许多先进仪器的监控质量已经在现场得到验证，常规接触法的工作效率低的缺点日益突出；监控测量人员的素质高低决定了报告的编制水平，而规范对于数据的处理方式和报告表达内容尚未做明确指示。为解决上述问题，本标准的内容框架主要基于以下几个方面考虑： （1）建立软岩隧道围岩变形速率预警体系 基于大量软岩隧道的监控数据，基于数理统计的原理，确定围岩变形速率预警阈值和极限变形量预警阈值，建立该阈值与隧道围岩条件、隧道断面尺寸以及支护强度的相关性，确定每座具体软岩隧道的预警值。 （2）不同工况下监测方法的选择 考虑软岩隧道的具体施工工法的不同，采用不同的监控方法，并对监测点的埋设和保护做具体说明。 （3）规范报告的编制内容 统一报告形式，规范不同监控方法下的原始数据记录表，对采集的异常数据进行详细的处理和分析，并预测发展趋势，提出施工建议。

Technical code for monitoring and measurement of soft rock tunnel

T/CMEA 4-2019 城市综合管廊基本术语标准

1.总则；2.一般术语；3.规划与设计；4.管廊本体；5.附属设施；6.检验与验收；7.运营管理。

Standard for basic terminology of urban utility tunnel

BS 6164:2019 建筑行业隧道施工的健康和安全 实践守则

  What is BS 6164 - S afety in tunnelling   about? BS 6164 deals with the safety of those engaged in the tunnelling process and of those who could be affected by it. Who is  BS 6164 -   S afety in tunnelling  for? Everyone involved in tunnelling projects. Why should you use  BS 6164 -   S afety in tunnelling ? BS 6164 makes recommendations for and gives guidance on health and safety practices in shaft sinking and tunnel construction. BS 6164 includes health and safety recommendations that are also relevant to cut-and-cover tunnelling, immersed tube tunnels and other forms of underground construction as well as to the maintenance, renovation and repair of shafts and tunnels. NOTE: The recommendations is this standard are not intended to apply to the construction of shafts or tunnels for the purpose of mineral extraction. What’s changed since the last update? This British Standard replaces  BS 6164:2011 , which is withdrawn. The revision takes into account the advances in technology and equipment available to the tunnelling industry as well as new techniques and the effect of changes in legislation and guidance relating to health and safety and environmental matters. NOTE: There is an error in Table 8 of BS 6164:2019, in which the exposure limits for sulfur dioxide have been incorrectly stated. Whilst this information was correct at the time the standard was published, it has since been updated. The correct limits are ...

Health and safety in tunnelling in the construction industry. Code of practice

T/CHTS 10020-2019 港珠澳大桥设计指南 第二分册：沉管隧道工程

本指南按照《中国公路学会标准编写规则》(T/CHTS10001)的要求编写而成。本指南共分15章,主要技术内容包括总则,术语、符号和代号,基础资料,总体设计,管节结构设计,接头设计,抗震设计,地基处理与基础设计,基槽与回填防护设计,防水设计,耐久性设计,施工监测与运营期健康监测,临时工程设计,管节舾装设计,运营设施设计等。

Hong Kong-Zhuhai-Macao Bridge Design Guide Volume II: Immersed Tube Tunnel Engineering

T/CECS 10024-2019 公路隧道检测车

本标准分为 10 章、6 个附录，主要内容包括:1 范围，2 规范性引用文件，3 术语和 定义，4 整车，5 数据采集系统，6 数据处理系统，7 试验方法，8 检验与标定，9 标志、 使用说明书，10 随车文件、运输、保养，附录 A 数据物理单位及数字取位，附录 B 隧道 病害展布图，附录 C 分辨率标定纸，附录 D 衬砌表观病害 A3 标定纸制作方法，附录 E 衬 砌内部病害标准试件制作方法，附录 F 试验记录表。

Highway Tunnel Inspection Vehicle

DB35/T 1866-2019 公路隧道超前地质预报技术规程

本标准规定了公路隧道超前地质预报的术语和定义、符号、总则、基本规定、超前地质预报实施方案编制、地质调查、电磁波反射法、地震波反射法、高分辨直流电法和地质超前钻探的方法。 本标准适用于公路隧道的超前地质预报工作。

Technical specification for advanced geological prediction of highway tunnels

T/CHCA 002-2019 公路隧道湿喷混凝土施工技术指南

喷射混凝土用于公路隧道临时防护或洞内初期支护，可单独或者与锚杆、钢筋网、钢架等支护结构的一种形式或几种形式共同组成支护体系，其主要作用是封闭围岩、支撑围岩、阻止围岩松动。 本指南在总结公路隧道喷射混凝土施工技术前提下，顺应工程技术发展的趋势，从喷射混凝土原材料及配合比、湿喷工艺、质量控制与检查等方面综合阐述了公路隧道湿喷混凝土的技术要点。

Technical Guidelines for Wet Shotcrete Construction in Highway Tunnels

T/CHCA 001-2019 公路隧道三台阶七步开挖法技术指南

本施工技术指南，以公路隧道工程质量验收标准为依据，重点对施工过程中的施工工艺、操作方法、施工控制要点等提出了具体要求，突出了公路隧道三台阶七步开挖施工的技术特点。

Technical Guidelines for Three-step and Seven-step Excavation Method of Highway Tunnel

DB51/T 2599-2019 公路明（棚）洞勘察设计指南

Guidelines for Survey and Design of Highway Opening (Shed) Caves

T/CECS 616-2019 隧道施工超前地质预报技术规程

本规程共分7章和8个附录，主要技术内容包括：总则、术语、基本规定、预报设计、预报方法、不良地质体预报、预报成果报告等。

Technical specification for advance geological predication for tunnel construction

T/CECS 610-2019 盾构法输水隧道结构设计规程

本规程共分为10章和6个附录，主要技术内容包括：总则、术语和符号、基本规定、材料、荷载分类与组合、结构选型、结构计算、衬砌构造、防水设计、抗震设计等。

Technical Specification for Structural Design of Shield Hydraulic Tunnel

DB45/T 1958-2019 公路隧道监控量测技术规程

Technical Regulations for Monitoring and Measurement of Highway Tunnels

T/CECS 562-2018 《城市综合管廊防水工程技术规程》

本规程共分9章和2个附录，主要技术内容包括：总则、术语和符号、基本规定、混凝土结构自防水、明挖法现浇混凝土结构城市综合管廊、明挖法预制装配式混凝土结构城市综合管廊、矿山法城市综合管廊、盾构法城市综合管廊、顶管与箱涵顶进法城市综合管廊。

Technical specification for waterproofing of urban utility tunnel

DB37/T 5129-2018 隧道薄壁钢管初期支护施工技术规程

本规程适用于山东省行政区域内采用薄壁钢管混凝土作为初期支护的隧道构造设计、构建制作、施工和验收。

Technical specification for primary support construction of thin-walled steel pipes for tunnels